Exposure of garbage truck drivers and maintenance personnel at a waste handling centre to polycyclic aromatic hydrocarbons derived from diesel exhaust

Exposure to diesel exhaust was evaluated in summer and winter by measuring vapour and particle phase polycyclic aromatic hydrocarbons (PAHs). Fifteen PAHs were simultaneously determined from the air samples obtained from truck drivers collecting household waste and maintenance personnel at a waste handling centre. The major compounds analysed from the personal air samples of exposed workers were naphthalene, phenanthrene and fluorene. The total PAH exposure (sum of 15 PAHs) of garbage truck drivers ranged from 71 to 2,660 ng m(-3) and from 68 to 900 ng m-3 in the maintenance work. The exposure of garbage truck drivers to benzo[a]pyrene (B[a]P) ranged from the mean of 0.03 to 0.3 ng m(-3) whereas no B[a]P in control samples or in those collected from maintenance workers was detected. A statistically significant difference in diesel-derived PAH exposure between the garbage truck drivers and the control group in both seasons (in summer p = 0.0022, degrees of freedom (df) 70.5; and in winter p < 0.0001, df = 80.4) was observed. Also, a significant difference in PAH exposure between the garbage truck drivers and the maintenance workers (in summer p < 0.0001, df = 50.1; and in winter p < 0.0001, df = 44.2) was obtained.     

Exposure to airborne isocyanates and other thermal degradation products at polyurethane-processing workplaces

The thermal degradation products of polyurethanes (PURs) and exposure to isocyanates were studied by stationary and personal measurements in five different occupational environments. Isocyanates were collected on glass fibre filters impregnated with 1-(2-methoxyphenyl)piperazine (2MP) and in impingers containing n-dibutylamine (DBA) in toluene. connected to a glass fibre postfilter. The derivatives formed were analysed by liquid chromatography: 2MP derivatives with UV and electrochemical detection and DBA derivatives with mass spectrometric detection. The release of aldehydes and other volatile organic compounds into the air was also studied. In a comparison of the two sampling methods, the 2MP method yielded about 20% lower concentrations for 4,4'-methylenediphenyl diisocyanate (MDI) than did the DBA method. In car repair shops, the median concentration of diisocyanates (given as NCO groups) in the breathing zone was 1.1 microg NCO m(-3) during grinding and 0.3 microg NCO m(-3) during welding, with highest concentrations of 1.7 and 16 pg NCO m(-3), respectively. High concentrations of MDI, up to 25 and 19 microg NCO m(-3), respectively, were also measured in the breathing zone during welding of district heating pipes and turning of a PUR-coated metal cylinder. During installation of PUR-coated floor covering, small amounts of aliphatic diisocyanates were detected in the air. A small-molecular monoisocyanate, methyl isocyanate, and isocyanic acid were detected only during welding and turning operations. The diisocyanate concentrations were in general higher near the emission source than in the workers' breathing zone. A sampling strategy to evaluate the risk of exposure to isocyanates is presented.     

Air concentrations and urinary metabolites of polycyclic aromatic hydrocarbons among paving and remixing workers

The exposure of paving workers to polycyclic aromatic hydrocarbons (PAH) during stone mastic asphalt (SMA) paving and remixing was evaluated. The effects on the workers' PAH exposure were also evaluated during the use of an industrial by-product, coal fly ash (CFA), instead of limestone as the filler in the SMA. The PAH exposure was measured by personal air sampling and by analysing the levels of urinary naphthols, phenanthrols and 1-hydroxypyrene (1-OHP) in the workers' pre- and post-shift urine samples. The respiratory PAH exposure of the paving workers (geometric mean (GM) 5.7 microg m(-3)) was about ten-fold that of the traffic controllers (GM 0.43 microg m(-3)). The levels of PAH metabolites were significantly higher (p < 0.05) in the post-shift urine samples than in the pre-shift urine samples, and the levels of metabolites in the post-shift urine of paving workers were significantly higher than in that of the controls (p < 0.01). Urinary 1-naphthol correlated well with the airborne concentrations of the two- to three-ring PAHs (r = 0.544, p = 0.003) and naphthalene (r = 0.655, p < 0.001), when non-smoking paving workers were tested. A good correlation was observed between urinary 1-OHP and the airborne concentrations of the four- to six-ring PAHs (r = 0.524, p = 0.003) as well as total PAHs (r = 0.575, p = 0.001). The concentrations of 1-OHP and phenanthrols in the urine of the pavers were significantly higher (p < 0.01) during remixing than during SMA paving. The CFA in the asphalt had no effect on the airborne PAH exposure or on the concentrations of the PAH metabolites in the paving workers' urine.     

Health Risks Associated with Predicted Increase of Cadmium in Cultivated Soils and in the Diet

We have assessed the change of the dietary intake and the potential health risks of cadmium in Finland, assuming that a high level of cadmium in fertilizers (138 mg Cd/kg P) would prevail for the next 100 years. Soil measurements and modelling were used to derive the predicted level of cadmium in foods. In three important cultivars, wheat, potato and sugar beet, the cadmium concentration would increase by 20–35%. Consequently, the average dietary intake of cadmium in Finland would increase from 7.9 to 10.0 μg/day, corresponding with the urinary level of about 0.2 μg/l, a level that has not been associated with effects on the human health. However, in the risk group with 1) high dietary intake of cadmium, 2) elevated gastrointestinal absorption, and 3) tobacco smoking, the estimated urinary level of cadmium would be 2.0 μg/l. Recent epidemiological studies have shown that urinary level of 1–2 μg Cd/l is associated with an increased risk of bone demineralization and fractures, and 2–4 μg Cd/l with pre-clinical kidney damage. People characterized by more than one of the above-mentioned risks factors, may develop the adverse health effects at an old age, when cadmium has accumulated in the body.     

Conversion of dissolved phosphorus in runoff by ferric sulfate to a form less available to algae: Field performance and cost assessment

Conversion of dissolved P by ferric sulfate into a particulate form sparingly available to algae was studied in 15 ditches in Finland using stand-alone dispensers for ferric sulfate administration. Ferric sulfate typically converted 60–70 % of dissolved P into iron-associated form, a process which required 250–650 kg per kg dissolved P. Mean cost was 160 EUR per kg P converted (range 20–400 EUR kg^?1). The costs were lowest at sites characterized by high dissolved P concentrations and small catchment area. At best, the treatment was efficient and cost-effective, but to limit the costs and the risks, ferric sulfate dispensers should only be installed in small critical source areas.     

Implications of regulation based on the IPPC directive – A review on the Finnish pulp and paper industry

This article evaluates the impacts of integrated environmental permits on the environmental performance of Finnish pulp and paper industry. It assesses the performance of the Finnish pulp and paper mills in relation to the EU best available techniques (BAT) associated emission levels and compares the emission limit values and product specific emissions of the mills with non-integrated permits to those of the mills with new integrated permits. A set of practical indicators for the assessment of BAT, local conditions and transboundary effects is presented and discussed. Moreover, the paper highlights some significant cross-media aspects in the Finnish pulp and paper industry.     

Quantitative analysis of environmental factors in differential weighing of blank Teflon filters

Mass differences less than 100 microg must be correctly measured in gravimetric analysis of particles collected on filters. Even small variations in mass measurement may contribute significant errors to calculated concentrations. In addition to the collected particles, a number of other factors affect the observed mass difference between the measurements before and after sampling. The most often controlled of these factors are static charge, temperature, and humidity. Using 951 laboratory blank filter weights, we have statistically analyzed these and other factors that affect the observed filter weight. Some of these are controllable or correctable; others are not and enter into the final results as errors. The standard deviation of differential blank filter weighing after applying all corrections was 2.7 microg. The most important correctable factors are air buoyancy variation and filter storage time. When weighing blank Teflon filters at relative humidity < 50%, these are an order of magnitude more important than weighing-room humidity. Using field blank filters in each weighing batch could control these three factors but also doubles the errors caused by balance random variation and filter handling contamination, because four weighing measurements and the handling of two filters are needed to obtain one corrected differential mass result.     

Nodularin concentrations in Baltic Sea zooplankton and fish during a cyanobacterial bloom

Toxic cyanobacterial blooms, dominated by Nodularia spumigena, are a recurrent phenomenon in the Baltic Sea during late summer. Nodularin, a potent hepatotoxin, has been previously observed to accumulate on different trophic levels, in zooplankton, mysid shrimps, fish as well as benthic organisms, even in waterfowl. While the largest concentrations of nodularin have been measured from the benthic organisms and the food web originating from them, the concentrations in the pelagic organisms are not negligible. The observations on concentrations in zooplankton and planktivorous fish are sporadic, however. A field study in the Gulf of Finland, northern Baltic Sea, was conducted during cyanobacterial bloom season where zooplankton (copepod Eurytemora affinis, cladoceran Pleopsis polyphemoides) and fish (herring, sprat, three-spined stickleback) samples for toxin analyses were collected from the same sampling areas, concurrently with phytoplankton community samples. N. spumigena was most abundant in the eastern Gulf of Finland. In this same sampling area, cladoceran P. polyphemoides contained more nodularin than in the other areas, suggesting that this species has a low capacity to avoid cyanobacterial exposure when the abundance of cyanobacterial filaments is high. In copepod E. affinis nodularin concentrations were high in all of the sampling areas, irrespective of the N. spumigena cell numbers. Furthermore, nodularin concentrations in herring samples were highest in the eastern Gulf of Finland. Three-spined stickleback contained the highest concentrations of nodularin of all the three fish species included in this study, probably because it prefers upper water layers where also the risk of nodularin accumulation in zooplankton is the highest. No linear relationship was found between N. spumigena abundance and nodularin concentration in zooplankton and fish, but in the eastern area where the most dense surface-floating bloom was observed, the nodularin concentrations in zooplankton were high. The maximum concentrations in zooplankton and fish samples in this study were higher than measured before, suggesting that the temporal variation of nodularin concentrations in pelagic communities can be large, and vary from negligible to potentially harmful.     

Role of sea-ice biota in nutrient and organic material cycles in the northern Baltic Sea

This paper compiles biological and chemical sea-ice data from three areas of the Baltic Sea: the Bothnian Bay (Hailuoto, Finland), the Bothnian Sea (Norrby, Sweden), and the Gulf of Finland (Tv?rminne, Finland). The data consist mainly of field measurements and experiments conducted during the BIREME project from 2003 to 2006, supplemented with relevant published data. Our main focus was to analyze whether the biological activity in Baltic Sea sea-ice shows clear regional variability. Sea-ice in the Bothnian Bay has low chlorophyll a concentrations, and the bacterial turnover rates are low. However, we have sampled mainly land-fast level first-year sea-ice and apparently missed the most active biological system, which may reside in deformed ice (such as ice ridges). Our limited data set shows high concentrations of algae in keel blocks and keel block interstitial water under the consolidated layer of the pressure ridges in the northernmost part of the Baltic Sea. In land-fast level sea-ice in the Bothnian Sea and the Gulf of Finland, the lowermost layer appears to be the center of biological activity, though elevated biomasses can also be found occasionally in the top and interior parts of the ice. Ice algae are light limited during periods of snow cover, and phosphate is generally the limiting nutrient for ice bottom algae. Bacterial growth is evidently controlled by the production of labile dissolved organic matter by algae because low growth rates were recorded in the Bothnian Bay with high concentrations of allochthonous dissolved organic matter. Bacterial communities in the Bothnian Sea and the Gulf of Finland show high turnover rates, and activities comparable with those of open water communities during plankton blooms, which implies that sea-ice bacterial communities have high capacity to process matter during the winter period.