Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.     

Single walled carbon nanotubes induce cytotoxicity and oxidative stress in HEK293 cells

The aim of the present study was to evaluate the potential toxicity and general mechanisms involved in single walled carbon nanotubes (SWCNTs)-induced cytotoxicity using human embryonic kidney cell line (HEK293) cells. Carbon nanotubes (coded as CNT) used in this study were synthesized by the chemical vapor deposition method. To elucidate the possible mechanisms underlying SWCNT-induced cytotoxicity, cell viability, cell membrane damage (lactate dehydrogenase activity (LDH) assay), reduced glutathione (GSH), interleukin-8 (IL-8) and lipid peroxidation products levels were quantitatively assessed following SWCNT exposure for 48 hr using HEK293 cells. Exposure of cells to SWCNT at 3–300 μg/ml produced significant reduction in cell viability in a concentration-dependent manner. The IC₅₀ value of SWCNT was found to be 87.58 μg/ml. Exposure of HEK cells to SWCNT at 10–100 μg/ml resulted in concentration-dependent cell membrane damage, increased production of IL-8, elevated levels of thiobarbituric acid reactive substances like malondialdehyde and decreased intracellular GSH levels. In summary, exposure to SWCNT resulted in a concentration-dependent cytotoxicity in cultured HEK293 cells that was associated with increased oxidative stress.     

Model reactions of chromium compounds with mammalian and bacterial cells†

Chromate uptake, reduction, cytotoxicity and mutagenicity were studied with human red blood cells, Chinese hamster ovary (CHO) cells and/or Salmonella typhimurium mutant cells. All cell types rapidly took up chromates whereas chromium(III) salts were excluded under the experimental conditions. Red blood cells reduced and accumulated chromium from chromate. At concentrations above 0.1 mM, chromate inactivated the red cell chromate carrier. Chromate above 0.01 mM inhibited CHO cell proliferation irrespective of the cations present. Chromate and two chromium(III) complexes were mutagenic with Salmonella mutants in the Ames’ assay. A model for chromate metabolism and genotoxicity is proposed.     

Measurement of watershed phosphorus: A review

Eutrophication control programs are based on phosphorus management which, in turn, requires a detailed quantification of the watershed phosphorus budget. This involves an assessment of non‐point sources of phosphorus, a key element of which is determining the fraction of soil‐P and sediment‐P available to support algal growth. This paper presents a review of the state‐of‐the‐art of estimating algal available‐P from non‐point sources, and an analysis of pertinent data. The need to employ multi‐interval algal bioassays in developing phosphorus management systems is stressed.     

Influence of phytoplankton on complexing capacity of seawater†

Differential Pulse Anodic Stripping Voltammetry (DPASV) was employed to measure Apparent Copper Complexing Capacity (L_t) and Stability Constants (K_s) of related cupric complexes of cell exudates of the phytoplanktonic alga Dunaliella salina. Three natural seawater samples collected 0.1, 2, 5 miles off the Tyrrhenian coast were used as culture medium. The measurements were carried out 1h and 7 days after the inoculum. Furthermore, on one culture the medium was passed through C₁₈‐SEP‐PAK cartridges in order to separate the cell exudates. The results show that Dunaliella salina influences the value of L_t but does not affect the value of K_s . The C₁₈SEP‐PAK retain only 50% of the ligands produced by the cells and capable of complexing copper.     

Genotoxicity of chromium in vitro on yeast: Interaction with DNA†

The genotoxicity of chromium chloride was investigated in cells of D₇ strain of Saccharomyces cerevisiae harvested either from logarithmic or stationary growth phase.

A weak induction of mifotic gene conversion and point reverse mutation was obtained when the incubations were performed using phosphate buffer. No genetic effect was observed when the incubations were performed using Tris‐HCl buffer.

The experiments with ⁵¹Cr radiotracer demonstrated that Cr³⁺ ion enters the yeast cells and binds to DNA even if the incubation mixture was performed with Tris HCl buffer. This behaviour could be due to the highest concentration of CrCl₃ that cause some damages to cytoplasmatic membrane.     

Speciation of heavy metals in suspended particulates in urban air†

An anayltical procedure based on a sequential extraction scheme is applied to samples of suspended particulates from an urban area of Barcelona. This area presents high levels of air pollution owing to automotive emissions and industrial activity.

The procedure allows the partitioning of particulate trace metals into four fractions: soluble and exchangeable, bound to carbonates and iron‐manganese oxides, bound to organic matter and residual. In this work, the chemical associations of Fe, Pb, Cu, Mn, Cr and Cd have been investigated.

In the analysed samples, only the cadmium is predominantly in the first fraction whereas the other metals are largely associated to carbonates and Fe‐Mn oxides.     

Measurement of the leaching behaviour of granular solid wastes

Leaching of granular solids can be described in terms of specific mass transfer functions of a simple mathematical form.

The parameters can be determined by column leaching experiments under well known flow conditions.

Initially available concentrations are obtained from batch experiments at high dilution. Total concentrations in the solids are determined independently to calculate the available fractions.

The determination of the flow pattern is done by radiotracer measurements. Leachates are analyzed by various analytical methods including AAS and INAA. Total concentrations in the solids are determined by INAA preferably.     

Preliminary environmental study of New Karvali Bay (Kavala Gulf,North Greece)

In this presentation the results of an environmental study of New Karvali bay, in Kavala Gulf, North Greece, are announced. In the studied bay the main industrial activity is a Factory of Chemical Fertilizers (FCF) and its wastes have been discharged, practically without any treatment, to the sea. The study has shown that the concentrations of phosphates and nitrates in the area around the place of the waste ejection from the factory are relatively high. Other remarkable points of the study are the presence of fluoride anions in higher level than normal and the low concentration of heavy metals (Cu, Pb and Zn).     

Large plasmids governing multiple resistances to heavy metals: A genetic approach∗

Gram negative bacteria classified as Alcaligenes eutrophus and carrying large resistance plasmids (generally two) were found in various industrial sites highly contaminated by heavy metals (Zn⁺⁺, Cu⁺⁺, Co⁺⁺,...). These strains were detected by DNA hybridization with a probe made with a 9kb fragment (ccz⁺ fragment) encoding for resistances to Cd⁺⁺, Co⁺⁺ and Zn⁺⁺, and cloned from plasmid pMOL30. This plasmid was isolated from the representative strain A. eutrophus CH34 which harbours the plasmids pMOL30 (240 kb) and pMOL28 (165 kb). Phenotypes related to pMOL28 and pMOL30 include the tolerance to Cd⁺⁺, Co⁺⁺, Cr0₄ ⁼, Cu⁺⁺, Hg⁺⁺, Ni⁺⁺, Pb⁺⁺ and Zn⁺⁺. The described genetic properties of these plasmids refer to some cloned or mapped functions and to some plasmid rearrangements. Plasmid pMOL85 (250 kb) which is related to pMOL30 was also described. Its host (A. eutrophus DS185) was isolated from a zinc desert. pMOL85 can efficiently self transfer in plasmidfree derivatives.