Retaining natural vegetation to safeguard biodiversity and humanity

Global efforts to deliver internationally agreed goals to reduce carbon emissions, halt biodiversity loss, and retain essential ecosystem services have been poorly integrated. These goals rely in part on preserving natural (e.g., native, largely unmodified) and seminatural (e.g., low intensity or sustainable human use) forests, woodlands, and grasslands. To show how to unify these goals, we empirically derived spatially explicit, quantitative, area-based targets for the retention of natural and seminatural (e.g., native) terrestrial vegetation worldwide. We used a 250-m-resolution map of natural and seminatural vegetation cover and, from this, selected areas identified under different international agreements as being important for achieving global biodiversity, carbon, soil, and water targets. At least 67 million km² of Earth's terrestrial vegetation (∼79% of the area of vegetation remaining) required retention to contribute to biodiversity, climate, soil, and freshwater conservation objectives under 4 United Nations’ resolutions. This equates to retaining natural and seminatural vegetation across at least 50% of the total terrestrial (excluding Antarctica) surface of Earth. Retention efforts could contribute to multiple goals simultaneously, especially where natural and seminatural vegetation can be managed to achieve cobenefits for biodiversity, carbon storage, and ecosystem service provision. Such management can and should co-occur and be driven by people who live in and rely on places where natural and sustainably managed vegetation remains in situ and must be complemented by restoration and appropriate management of more human-modified environments if global goals are to be realized.     

Sub-cooled and flashing liquid jets and droplet dispersion II. Scaled experiments and derivation of droplet size correlations

This paper describes the results of the first stage of Phase III of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. This stage included scaled experiments for water, gasoline, and cyclohexane for a range of superheats and nozzles with different aspect ratios. Additional experiments for butane and propane were conducted as a validation exercise and are discussed in the companion paper. Moreover this paper provides recommendations for atomisation correlations in the regimes of mechanical break-up, transition to flashing, and fully flashing. The objectives of this scaled experimental programme are to : (i) provide confidence in the previously proposed modelling methodology (Phase II) across a broad range of initial conditions (ii) update the models’ correlations to generalise further its applicability (iii) recommend further model improvements. Development of new correlations for Sauter Mean Droplet diameter (SMD) and droplet size distribution is based on a best fit of the current scaled experimental data. The new data endorses the previous tri-functional Phase II approach including regimes for mechanical break-up, transition to flashing, and fully flashing, which is hence updated in the new Phase III SMD model. Considerable effort is devoted to capturing the full droplet size range under low-superheat conditions. Also, new enhancements in PDA technology were adopted to enable better quality data under high-superheat conditions. The priority recommendation for further model improvement is better characterisation of the poor quality releases under low-superheat conditions, where this work indicates that extremely broad droplet size distributions are likely. A companion paper (Part I) presents a more general overview of the dispersion problem, implementation of the correlations and subsequent performance against both the current scaled experiments and additional large-scale butane experiments.     

Invasion costs,impacts, and human agency: response to Sagoff 2020

Article impact statement: In an era of profound biodiversity crisis, invasion costs, invader impacts, and human agency should not be dismissed.     

Simple Modeling Tool for Reconstructing Source History Using High Resolution Contaminant Profiles From Low‐k Zones

An innovative but simple analytical modeling tool for reconstructing contaminant concentration versus time trends (i.e., “source history”) for a site using high‐resolution contaminant profiles from low permeability (low‐k) zones was developed and tested. Migration of contaminants into low‐k zones via diffusion (and possibly slow advection) produce concentration versus depth profiles that can be used to understand temporal concentration trends at the interface with overlying transmissive zones, including evidence of attenuation over time due to source decay. A simple transport‐based spreadsheet tool for generating source history estimates fit to the profiles was developed and applied to published soil concentration versus depth data from five distinct areas of four different sites contaminated with chlorinated ethenes. Using the root mean square error as an optimization metric, strong fits between measured and model‐predicted soil data were obtained in the majority of cases using site‐specific values for input parameters. In general, significant improvements could not be obtained by varying these parameters. As a result, the source history estimates generated by the tool were similar to those that had already been generated using more intensive analytical or numerical inverse modeling approaches. This included confirmation of constant source histories at locations where dense nonaqueous‐phase liquid was present (or suspected to be present), and declining source histories for locations where source isolation and/or attenuation had occurred. The advantage of the modeling tool described here is that it provides a simpler yet more dynamic method for understanding source behavior over time than existing approaches. ©2015 Wiley Periodicals, Inc.     

Use of macroinvertebrate assemblages for assessing performance of stabilization ponds treating effluents from sugarcane and molasses processing

Wastewater discharge from sugarcane processing is a significant pollutant of tropical aquatic ecosystems. For most developing countries, monitoring of the level of pollutants is done mostly through chemical analysis, but this does not reflect potential impacts on aquatic assemblages. In addition, laboratory facilities for accurate concentration measurements are often not available for regular monitoring programs. In this study, we investigated the use of benthic macroinvertebrates for biological monitoring in western Kenya. Benthic macroinvertebrates were sampled in stabilization ponds treating wastewater from sugarcane- and molasses-based processing plants to assess their composition and abundance in relation to different concentrations of chemical variables. Optimum concentrations and tolerance values were identified for various taxa, and a biotic index was developed that combined tolerance values (ranked between 0 and 10) for the various macroinvertebrate taxa. A succession in composition and distribution of macroinvertebrate taxa was observed from the inlet to the outlet of the pond systems. Diptera dominated in the first ponds that had high concentrations of chemical oxygen demand (COD), biological oxygen demand (BOD₅), and nutrients, while intolerant Ephemeroptera, Plecoptera, and Trichoptera (EPT) appeared as the concentrations dropped in subsequent ponds. The effluent quality was classified as “good,” “fair,” and “poor,” corresponding with biotic index value ranges 0–3.50, 3.51–6.50, and 6.51–10, respectively. During validation, the index grouped sites with respect to levels of measured environmental variables. The study revealed that the developed biotic index would help in monitoring the quality of sugarcane processing and molasses effluents before release into recipient aquatic ecosystems, replacing the need for costly chemical analyses.     

The development of alum rates to enhance the remediation of phosphorus in fluvial systems following manure spills

Following the remediation of animal manure spills that reach surface waters, contaminated streambed sediments are often left in place and become a source for internal phosphorus (P) loading within the stream in subsequent flow. The objective of this study was to develop treatment rates and combinations of alum and CaCO(3) to mitigate P from contaminated sediments of different particle size distributions following a manure spill. Sediment specific alum and CaCO(3) treatment rates were developed based upon the resultant alum treatment ranges established for each sediment type. Clay loam sediments required 54% more alum to mitigate P desorption relative to sediments that contain at least 60% sand. Amending sediments with the highest rates of alum/alum + CaCO(3), resulted in a 98-100% reduction in P desorption and a similar water column pH for all sediments types. Observations from this study demonstrated the effectiveness of alum/alum + CaCO(3) to increase P retention in sediments following a manure spill.     

Visual fields in Flamingos: chick-feeding versus filter-feeding

In birds, the position and extent of the region of binocular vision appears to be determined by feeding ecology. Of prime importance is the degree to which vision is used for the precise control of bill position when pecking or lunging at prey. In birds that do not require such precision (probe and filter-feeders), the bill falls outside the binocular field, which extends above and behind the head, thus providing comprehensive visual coverage. Flamingos Phoenicopteridae are highly specialised filter-feeders. They employ a unique technique that does not require accurate bill positioning in which the inverted head is placed between the feet. Feeding flamingos often walk forwards with the head pointing “backwards”. Here we show that in Lesser Flamingos Phoeniconaias minor visual fields are in fact the same as those of birds that feed by precision pecking and that feeding flamingos are blind in the direction of their walking. We suggest that this is due to the requirement for accurate bill placement when flamingos feed their chicks with “crop-milk”, and possibly when building their nest. We propose that chick-feeding may be the ultimate determinant of visual field topography in birds, not feeding ecology.     

Factors affecting heavy-duty diesel vehicle emissions

Societal and governmental pressures to reduce diesel exhaust emissions are reflected in the existing and projected future heavy-duty certification standards of these emissions. Various factors affect the amount of emissions produced by a heterogeneous charge diesel engine in any given situation, but these are poorly quantified in the existing literature. The parameters that most heavily affect the emissions from compression ignition engine-powered vehicles include vehicle class and weight, driving cycle, vehicle vocation, fuel type, engine exhaust aftertreatment, vehicle age, and the terrain traveled. In addition, engine control effects (such as injection timing strategies) on measured emissions can be significant. Knowing the effect of each aspect of engine and vehicle operation on the emissions from diesel engines is useful in determining methods for reducing these emissions and in assessing the need for improvement in inventory models. The effects of each of these aspects have been quantified in this paper to provide an estimate of the impact each one has on the emissions of diesel engines.     

Characteristics of Resuspension,Settling and Diffusion of Particulate Matter in a Water Column

Experiments were conducted in order to characterize the distributions of concentrations of suspended particulate matter (SPM) in water columns of lakes and reservoirs. The experiments, in a reduced model of the water column, used a set of oscillating grids. Runs were done with particles denser than water as well as with light particles. The results were in good agreement with analytical solutions for steady-state, and non-steady-state conditions. An approximate analytical solution was derived and found to be in agreement with the full solution. The threshold for resuspension was measured, and characterized in terms of a modified Shields parameter, which is appropriate to a zero-shear environment. All experiments showed that the distribution of SPM exhibited a layer near the bottom that is thought to be analogous to the benthic nepheloid layer (BNL) observed in larger lakes. The thickness of the nepheloid layer increases with the turbulence intensity.