Importance of conserving large and old trees to continuity of tree-related microhabitats

Protecting structural features, such as tree-related microhabitats (TreMs), is a cost-effective tool crucial for biodiversity conservation applicable to large forested landscapes. Although the development of TreMs is influenced by tree diameter, species, and vitality, the relationships between tree age and TreM profile remain poorly understood. Using a tree-ring-based approach and a large data set of 8038 trees, we modeled the effects of tree age, diameter, and site characteristics on TreM richness and occurrence across some of the most intact primary temperate forests in Europe, including mixed beech and spruce forests. We observed an overall increase in TreM richness on old and large trees in both forest types. The occurrence of specific TreM groups was variably related to tree age and diameter, but some TreM groups (e.g., epiphytes) had a stronger positive relationship with tree species and elevation. Although many TreM groups were positively associated with tree age and diameter, only two TreM groups in spruce stands reacted exclusively to tree age (insect galleries and exposed sapwood) without responding to diameter. Thus, the retention of trees for conservation purposes based on tree diameter appears to be a generally feasible approach with a rather low risk of underrepresentation of TreMs. Because greater tree age and diameter positively affected TreM development, placing a greater emphasis on conserving large trees and allowing them to reach older ages, for example, through the establishment of conservation reserves, would better maintain the continuity of TreM resource and associated biodiversity. However, this approach may be difficult due to the widespread intensification of forest management and global climate change.     

A Biogeochemical Comparison of Two Well-Buffered Catchments with Contrasting Histories of Acid Deposition

Much of the biogeochemical cycling research in catchments in the past 25 years has been driven by acid deposition research funding. This research has focused on vulnerable base-poor systems; catchments on alkaline lithologies have received little attention. In regions of high acid loadings, however, even well-buffered catchments are susceptible to forest decline and episodes of low alkalinity in streamwater. As part of a collaboration between the Czech and U.S. Geological Surveys, we compared biogeochemical patterns in two well-studied, well-buffered catchments: Pluhuv Bor in the western Czech Republic, which has received high loading of atmospheric acidity, and Sleepers River Research Watershed in Vermont, U.S.A., where acid loading has been considerably less. Despite differences in lithology, wetness, forest type, and glacial history, the catchments displayed similar patterns of solute concentrations and flow. At both catchments, base cation and alkalinity diluted with increasing flow, whereas nitrate and dissolved organic carbon increased with increasing flow. Sulfate diluted with increasing flow at Sleepers River, while at Pluhuv Bor the sulfate-flow relation shifted from positive to negative as atmospheric sulfur (S) loadings decreased and soil S pools were depleted during the 1990s. At high flow, alkalinity decreased to near 100 μeq L^-1 at Pluhuv Bor compared to 400 μeq L^-1 at Sleepers River. Despite the large amounts of S flushed from Pluhuv Bor soils, these alkalinity declines were caused solely by dilution, which was greater at Pluhuv Bor relative to Sleepers River due to greater contributions from shallow flow paths at high flow. Although the historical high S loading at Pluhuv Bor has caused soil acidification and possible forest damage, it has had little effect on the acid/base status of streamwater in this well-buffered catchment.     

What Anthropogenic Radionuclides (90Sr and 137Cs in Atmospheric Deposition, Surface Soils and Aeolian Dusts Suggest for Dust Transport over Japan

Currently, atmospheric anthropogenic radionuclides (particulate) are controlled by suspension of the surface dust containing those radionuclides (resuspension). We have found, therefore, that such radionuclides can be used as tracers of the surface dust suspension, transport and its subsequent deposition in distant areas. The ¹³⁷Cs/⁹⁰Sr activity ratios in the atmospheric deposition, without the direct influence of nuclear tests and accidents, at the Meteorological Research Institute (MRI, Tsukuba, Japan) during the 1990s were fairly low (average: 2.1). This value is not in agreement with the ratios in Japanese surface soils (range of averages: 4–7), which had been considered as the primary source of the deposited dust. This suggests that the current atmospheric dust deposition in Japan is a mixture of local and remote components. The remote component could be an aeolian dust that has been transported long distances from arid areas. The major component is most likely to be Asian dust. It was further hypothesized that other remote source may exist beyond the Asian domain, based on accumulated observations and model results. To obtain more information about the dust transport, Sahara dust deposited in Monaco in 2002 and a suspended dust collected in the Taklamakan area in 2001 were analyzed for ⁹⁰Sr and ¹³⁷Cs. The Taklamakan dust exhibited a ¹³⁷Cs/⁹⁰Sr ratio of about 4, which is within the range of atmospheric deposition observed at the MRI, while the Sahara dust exhibited a higher ¹³⁷Cs/⁹⁰Sr ratio (about 13). Although the present Sahara datum was negative for our hypothesis of ‘hyper-range transport’, the seasonal change of the ¹³⁷Cs/⁹⁰Sr ratio in the atmospheric deposition observed at the MRI requires an aeolian dust source having a low ¹³⁷Cs/⁹⁰Sr ratio, other than Asian dust.     

Changes in cadmium mobility during composting and after soil application

The effect of twelve weeks of composting on the mobility and bioavailability of cadmium in six composts containing sewage sludge, wood chips and grass was studied, along with the cadmium immobilization capacity of compost. Two different soils were used and Cd accumulation measured in above-ground oat biomass (Avena sativa L.). Increasing pH appears to be an important cause of the observed decreases in available cadmium through the composting process. A pot experiment was performed with two different amounts of compost (9.6 and 28.8 g per kg of soil) added into Fluvisol with total Cd 0.255 mg kg^?1, and contaminated Cambisol with total Cd 6.16 mg kg^?1. Decrease of extractable Cd (0.01 mol l^?1 CaCl₂) was found in both soils after compost application. The higher amount of compost immobilized an exchangeable portion of Cd (0.11 mol l^?1 CH₃COOH extractable) in contaminated Cambisol unlike in light Fluvisol. The addition of a low amount of compost decreased the content of Cd in associated above-ground oat biomass grown in both soils, while a high amount of compost decreased the Cd content in oats only in the Cambisol.     

Comparison of extraction methods for polycyclic aromatic hydrocarbon determination in sediments

Different sample preparation methods for the determination of polycyclic aromatic hydrocarbons (PAHs) in lake and river sediments were compared and evaluated. Freeze‐dried sediment materials were extracted using Soxhlet extraction, ultrasonic agitation and digestion with various solvents and solvent mixtures. Similarly, clean‐up methods using various types of sorbents for separation of PAHs tested.

The following method gives the best results for the determination of PAHs: freeze‐dried sediment samples were extracted using Soxhlet extractor with dichloromethane (6 hr, dark), extracts were cleanup using Silica gel and a mixture of n‐hexa‐ne‐dichloromethane was used for the elution of PAHs.

This method was used for the determination of 7 selected PAHs in sediment samples from Finnish lakes and Czech streams.     

Utilization of the solid sorbent media in monitoring of airborne cyclophosphamide concentrations and the implications for occupational hygiene

The main objective of the study was to evaluate the applicability of two solid sorbent media (Anasorb 708 and Strata X), the impinger filled with distilled water and PTFE filters for determination of airborne cyclophosphamide (CP) in the hospital working environment. For this purpose, air contamination of Masaryk Memorial Cancer Institute (Czech Republic) was monitored using the sampling apparatus containing the samplers described above. In addition, the surface contamination was also determined using the wipe sampling technique. During the monitoring, contamination of three different workplaces (storage room, preparation room and outpatient clinic) was studied. Using Strata X solid sorbent tubes, airborne CP was determined in all (n = 5) samples collected at the outpatient clinic over a 5 day monitoring period (concentration range: 0.3-4.3 ng m(-3)). Other samplers (including PTFE filters) did not collect any detectable amount of CP (the limit of detection, LOD ≤ 0.1 ng m(-3)). Negative results detected at filter samples indicate that CP determined at Strata X samples was most probably of gaseous origin. Surface contamination ranged from <2 to 19, <8 to 418 and 133-15,500 pg cm(-2) at the storage room, preparation room and outpatient clinic, respectively. The study showed that evaporation of antineoplastic drugs should not be neglected, albeit the concentrations determined in our study are relatively low. Therefore, proper monitoring of airborne contamination should involve simultaneous sampling of both particle-bonded and gaseous phases. In this way, Strata X sorbent tubes seem to be an effective tool for the sampling of gaseous CP in the indoor air.