Hydrologic evaluation of landfill performance (HELP) modeling in bioreactor landfill design and permitting

The practice of operating municipal solid waste landfills as bioreactor landfills has become more common over the past decade. Because simulating moisture balance and flow is more critical in such landfills than in dry landfills, researchers have developed methods to address this problem using the hydrologic evaluation of landfill performance (HELP) model. This paper discusses three methods of applying the HELP model to simulate the percolation of liquids added to landfill waste: the leachate recirculation feature (LRF), the subsurface inflow (SSI) feature, and additional rainfall to mimic liquids addition. The LRF is simple to use but may not be able to bring the landfill to bioreactor conditions. The SSI feature provides a convenient user interface for modeling liquids addition to each layer. The additional rainfall feature provides flexibility to the model, allowing users to estimate the leachate generation rate and the leachate head on bottom liner associated with daily variation in the liquids addition rate. Additionally, this paper discusses several issues that may affect the HELP model, such as the time of model simulation, layers of liquids addition, and the limitations of the HELP model itself. Based on the simulation results, it is suggested that the HELP model should be run over an extended period of time after the cessation of liquids addition in order to capture the peak leachate generation rate and the head on the liner (HOL). From the perspectives of leachate generation and the HOL, there are few differences between single-layer injection and multiple-layer injection. This paper also discusses the limitations of using the HELP model for designing and permitting bioreactor landfills.     

Removal of the hazardous dye rhodamine B through photocatalytic and adsorption treatments

This paper reports on photocatalytic and adsorptive treatment of a hazardous xanthene dye, Rohdamine B, in wastewater. The photocatalytic degradation was carried out in the presence of the catalyst TiO(2) and the effects of pH, concentration of the dye, amount of TiO(2), temperature and electron acceptor H(2)O(2) on the degradation process were observed. It was found that photocatalytic degradation by TiO(2) is an effective, economical and faster mode of removing Rohdamine B from aqueous solutions. Attempts were also made to utilize activated carbon and rice husk as potential adsorbents to remove Rhodamine B from wastewater. The adsorption studies were carried out at 40, 50 and 60 degrees C, and the effects of pH, temperature, amount of adsorbents, concentration of adsorbate, etc., on the adsorption were measured. On the basis of adsorption data the Langmuir and Freundlich adsorption isotherm models were also confirmed. The adsorption isotherm constants thus obtained were employed to calculate thermodynamic parameters like Gibb's free energy, change in enthalpy and entropy. In order to observe the quality of wastewater COD measurements were also carried out before and after the treatments. A significant decrease in the COD values was observed, which clearly indicates that both photocatalytic and adsorption methods offer good potential to remove Rhodamine B from industrial effluents.     

Heavy metal contamination in river water and sediments of the Swarnamukhi River Basin,India: risk assessment and environmental implications

The concentration of heavy metals was analyzed each of 20 river water, suspended sediments and bed sediments along the stretch of Swarnamukhi River Basin. River water is not contaminated with heavy metals except Fe and Mn. Contamination factor in sediments shows considerable to very high degree contamination with Cr, Cu, Pb and Zn. The sources of these metals could be residential wastes, sewer outfall, fertilizers, pesticides (M-45 + carbondine) and traffic activities apart from natural weathering of granitic rocks present in the basin area. Principal component analyses indicate the interaction between metals in different media. The comparison of metals (Cu, Pb and Zn) in bed sediments of Swarnamukhi River with the Indian and world averages indicates that the values obtained in the basin are above the Indian averages and far below to the world averages. Average shale values and sediment quality guidelines point toward the enrichment and contamination of Cu, Cr, Pb and Zn to several fold leading to eco-toxicological risks in basin.     

Carbon Management Response Curves: Estimates of Temporal Soil Carbon Dynamics

Measurement of the change in soil carbon that accompanies a change in land use (e.g., forest to agriculture) or management (e.g., conventional tillage to no-till) can be complex and expensive, may require reference plots, and is subject to the variability of statistical sampling and short-term variability in weather. In this paper, we develop Carbon Management Response (CMR) curves that could be used as an alternative to in situ measurements. The CMR curves developed here are based on quantitative reviews of existing global analyses and field observations of changes in soil carbon. The curves show mean annual rates of soil carbon change, estimated time to maximum rates of change, and estimated time to a new soil carbon steady state following the initial change in management. We illustrate how CMR curves could be used in a carbon accounting framework while effectively addressing a number of potential policy issues commonly associated with carbon accounting. We find that CMR curves provide a transparent means to account for changes in soil carbon accumulation and loss rates over time, and also provide empirical relationships that might be used in the development or validation of ecological or Earth systems models.     

APPLICATION OF SCS INFILTRATION MODEL1

ABSTRACT: The SCS infiltration model was applied to the Ralston Creek watershed in eastern Iowa. The criteria to determine the various model parameters were revised to obtain a better agreement between the observed and computed total runoffs. A procedure to calibrate the infiltration model is presented. The infiltration model was used in conjunction with an overland flow model to develop flood hydrographs. The results indicate that SCS infiltration model adequately describe the distribution of losses.     

Safety evaluation of cable barriers installation on rural highways in British Columbia

Objective: The objective of this study was to evaluate the safety effectiveness of cable barrier systems installation on rural highway sections in British Columbia, Canada.

Methods: Data on police-attended serious collisions (injury?+?fatality) on a number of rural highway sections in British Columbia, Canada, were used in the analysis. An empirical Bayes (EB) approach was employed to ensure that the evaluation results were reliable and to account for the regression to the mean artifact. Safety performance functions (SPFs) were developed using data collected at similar sites. For both median cable barrier (MCB) and roadside cable barrier (RCB) sections, the evaluation was undertaken using all serious collisions, truck serious collisions, and off-road serious collisions.

Results: For MCB sections, the evaluation results showed statistically significant reductions of 21.7, 53.8, and 34.8% in all serious collisions, truck serious collisions, and off-road left (ORL) combined with head-on (HO) serious collisions. For RCB sections, statistically significant reductions of 74.7, 100, and 100% were found in all serious collisions, truck serious collisions, and off-road right (ORR) serious collisions, respectively. The impact of the after period on the evaluation results was explored. It was found that the changes in safety become more stable using an after period of 2–5 years.

Conclusions: Cable barriers were successful in reducing the frequency of serious collisions on provincial highways in British Columbia.     

Exergy analysis of the transcritical N2O refrigeration cycle with a vortex tube

In this article, a comparative study is presented for the transcritical cycle with expansion valve (TCEV) and transcritical cycle with vortex tube (TCVT) mainly based on the second law of thermodynamics. Natural refrigerant nitrous oxide (N₂O) is used in both the cycles for analysis. The evaporator and gas cooler temperatures are varied from ?55°C to 5°C and 35°C to 60°C, respectively. The effects of various operating and design parameters on the optimum heat rejection pressure, coefficient of performance (COP), exergy loss (irreversibility), and the exergetic efficiency are studied. Exergy analysis of each component in TCEV and TCVT is performed to identify the amount and locations of irreversibility. It is observed that the use of the vortex tube in place of the expansion valve reduces the total exergy losses and increases the exergetic efficiency as well as COP. The exergetic efficiency and COP of the TCVT are on average 10–12% higher compared to TCEV for the considered operating conditions. The computed values of the exergetic efficiency for TCVT using refrigerant N₂O are the highest at an evaporator temperature of ?55°C, and the corresponding values of exergetic efficiency and exergy losses varies between 25.35% and 15.67% and between 74.65% and 84.33%, respectively. However, COP at the same evaporator temperature of ?55°C varies between 0.83 and 0.51. Furthermore, the optimum heat rejection pressure in TCVT is lower compared to that in TCEV. The results offer significant help for the optimum design and operating conditions of TCVT with refrigerant N₂O.     

Forecasting daily maximum surface ozone concentrations in Brunei Darussalam--an ARIMA modeling approach

A time series approach using autoregressive integrated moving average (ARIMA) modeling has been used in this study to obtain maximum daily surface ozone (O3) concentration forecasts. The order of the fitted ARIMA model is found to be (1,0,1) for the surface O3 data collected at the airport in Brunei Darussalam during the period July 1998-March 1999. The model forecasts of one-day-ahead maximum O3 concentrations have been found to be reasonably close to the observed concentrations. The model performance has been evaluated on the basis of certain commonly used statistical measures. The overall model performance is found to be quite satisfactory as indicated by the values of Fractional Bias, Normalized Mean Square Error, and Mean Absolute Percentage Error as 0.025, 0.02, and 13.14% respectively.     

global warming — uncertainties,effects, and policy options

Environmental policy making is a challenging task. Often the scope of an issue is not fully comprehended, and its future impact is even less well understood. Global warming is one of these environmental issues. The issue is made more complex because, first, there is a question of whether it is a problem at all and, second, unilateral policy making by one nation may not be sufficient or even significant to tackle the problem globally. This article outlines the scientific factors that contribute to global warming and discusses the uncertainties involved. The authors then discuss the ramifications of taking action (policy making) and failing to act (doing nothing) against the background of global warming, greenhouse gases, and cost-benefit analysis. The article concludes by reporting the results of a multidisciplinary panel of experts composed of scientists, economists, and policy analysts who commented on various policy options.