区域大气环境中PM2．5／PM10空间分布研究

提出了一种利用移动监测技术研究区域大气环境中PM2.5／PM10空间分布的方法,并在2004年12月进行了宁波市全市域PM2.5／PM10空间分布的研究。数据显示：相同路径所代表的地区PM2.5和PM10具有很好的相关性,多数路径上PM2.5与PM10数据的相关系数平方在0．95以上,而不同路径上PM2.5与PM10的比值不同。文中给出了宁波市PM2.5／PM10污染的空间分布图,直观地显示出PM2.5／PM10污染的空间分布情况,突出了污染的重点点位和地区。     

Fe^0-厌氧微生物体系处理活性艳红X-3B的试验研究

采用间歇式摇床试验,研究了葡萄糖共基质条件下Fe^0-厌氧微生物体系中Fe^0投加量、pH值、染料初始浓度对活性艳红X-3B模拟废水脱色率的影响,比较了Fe^0-厌氧微生物、纯厌氧微生物及纯Fe^0 3种体系中废水的脱色效果。结果表明：Fe^0-厌氧微生物体系中初始浓度（50～500mg／L）对活性艳红X-3B的脱色率影响不大;而Fe^0投加量、pH值存在一个最佳范围;当Fe^0投加量为260mg／L,pH值为6．0,污泥浓度为0．35gVSS／L,停留时间约为30h时,体系中活性艳红X-3B的脱色率可达90％左右,比相同试验条件下纯Fe^0、纯厌氧微生物体系达到此脱色率所需时间分别缩短了约1／2、7／10。在Fe^0-厌氧微生物体系中,由紫外可见分光光度分析可推测活性艳红X-3B的脱色机理主要是其偶氮键发生断裂,生成苯胺和萘类物质,而且苯胺和萘类物质能得到进一步降解。     

基于保护的瓷窑型遗址绿化改造研究——以长沙铜官窑遗址为例

瓷窑型遗址由于其埋藏浅、需要恒温恒湿等特点,对绿化的要求与其它遗址不尽相同。基于保护为主的绿化改造是瓷窑型遗址保护的重要内容。文章以长沙铜官窑遗址为例,在分析了长沙铜官窑遗址的植被组成、绿化现状以及现有植被对遗址保护的利弊基础上,提出了基于保护为主的绿化改造总体设想、主要对策措施和技术模式,希望为中国瓷窑型遗址的绿化改造提供借鉴。     

东胜区三台基水库水质细菌的鉴定

为了初步探索环境微生物的快速测定法,提升应对微生物污染突发事件的能力,本文运用美国BD公司的细菌鉴定系统对东胜区三台基水库水质细菌进行了鉴定。结果共鉴定出6种细菌,其可信度分别为95.7、99．1、94．3、98．7、98．5、和99．2。结果表明该系统快速、准确、可靠,可以作为环境微生物分类鉴定和微生物污染突发事件应急监测的依据。     

基于噪声指数的首都经济贸易大学校园声环境评价

文章在对首都经济贸易大学校园进行声功能区环境噪声监测的基础上,分析和计算了各区域测点噪声超标值（△LAeq）、噪声指数（LKZ）和噪声污染指数（PN）;从强度和影响人群人数两个角度评价校园声环境质量。结果表明,首都经济贸易大学校园声环境质量处于较差的水平,噪声强度超标率达到82％;据此,课题对校园噪声污染现状进行了影响分析和声环境质量的等级评定,最后针对污染现状提出了相关措施和建议。     

Long-term effects of silver nanoparticles on performance of phosphorus removal in a laboratory-scale vertical flow constructed wetland

Silver nanoparticles(AgNPs) have been widely used in many fields,which raised concerns about potential threats to biological sewage treatment systems.In this study,the phosphorus removal performance,enzymatic activity and microbial population dynamics in constructed wetlands(CWs) were evaluated under a long-term exposure to Ag NPs(0,50,and 200 μg/L) for 450 days.Results have shown that Ag NPs inhibited the phosphorus removal efficiency in a short-term exposure,whereas caused no obviously negativ...     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

隔振器过载振动复合环境试验研究

目的为了对试验产品的过载振动复合环境进行充分的考核,同时兼顾经济性和便捷性。方法选取橡皮绳、振动台系统进行过载复合环境试验,并分析橡皮绳、振动台系统的可行性,讨论其应用范围。结果从橡皮绳的拉伸曲线可以看出,橡皮绳的变形在5%以内刚度较大,变形超过5%刚度较小。在橡皮绳较小刚度区间,对隔振器进行振动试验,结果很好。结论采用橡皮绳、振动台系统进行隔振器过载复合环境试验不仅能够节省成本,缩短试验周期,而且能够达到很好的试验效果。     

石化企业外操岗位噪声40h等效声级计算方法探讨

目的:对职业卫生评价工作中石化企业外操岗位噪声40 h等效声级计算方法进行探讨.方法:通过对现行标准中每周40 h等效声级计算方法进行简化,得到简化的40 h等效声级公式.结果:与现行标准中每周40 h等效声级计算方法相比,简化的40 h等效声级计算方法得出的结果与之完全一致.结论:简化的40 h等效声级公式计算更为简单,提高了评价人员的工作效率.     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.