A novel thermotolerant Pediococcus acidilactici B-25 strain for color, COD, and BOD reduction of distillery effluent for end use applications

The present study was aimed to characterize physico-chemical and microbial population of distillery effluent and isolate a novel thermotolerant bacterium for color, COD, and BOD reduction of spentwash. The level of alkalinity, TSS, DO, COD, BOD, TN, ammonical nitrogen, nitrate nitrogen, phosphorous, potassium, chloride, and calcium of spentwash (SW), bioreactor effluent (BE), and secondary treated effluent (STE) were well above the permissible limits. The level of color, TS, and TDS were under the permissible limits for STE but not for SW and BE. The microbial population was higher in BE. The results revealed that effluent was highly polluted and require suitable treatment before discharge. A novel thermotolerant bacterium, identified as Pediococcus acidilactici, was isolated which exhibited maximum 79 % decolorization, 85 % COD, and 94 % BOD reduction at 45 °C using 0.1 %, glucose; 0.1 %, peptone; 0.05 %, MgSO4; 0.05 %, K₂HPO₄; pH 6.0 within 24 h under static condition. The ability of this strain to decolorize melanoidin at minimum carbon and nitrogen supplementation warrants its possible application for effluent treatment at industrial level. In addition, it is first instance when melanoidin decolorization was reported by P. acidilactici. This study could be an approach towards control of environmental pollution and health hazards of people in and around the effluent distillery unit.     

Triclosan in wastewaters and biosolids from Australian wastewater treatment plants

Triclosan (TCS) is an antimicrobial agent widely used in many personal care products. This study investigated the occurrence of TCS in effluents, biosolids and surface waters, and its fate in wastewater treatment plants (WWTPs). The aqueous concentrations of TCS in nineteen effluents from Australian WWTPs ranged from 23 ng/L to 434 ng/L with a median concentration of 108 ng/L, while its concentrations in nineteen biosolids ranged from 0.09 mg/kg to 16.79 mg/kg on dry weight basis with a median concentration of 2.32 mg/kg. The removal rates for TCS in five selected WWTPs were found to range between 72% and 93%. Biological degradation was believed to be the predominant removal mechanism for TCS in the WWTPs. However, adsorption onto sludge also played a significant role in the removal of TCS in the WWTPs. TCS at concentrations up to 75 ng/L was detected in surface waters (outfall, upstream, and downstream) from five rivers receiving effluent discharge from WWTPs. Preliminary risk assessment based on the worst-case scenario showed that the TCS concentrations in surface waters might lead to risks to aquatic organisms such as algae. Based on the TCS levels in the biosolids, application of biosolids on agricultural land may also cause adverse effects in the soil environment.     

Effect of ultrasonic pretreatment on secondary sludge and anaerobic biomass to enhance biogas production

Journal of Material Cycles and Waste Management - Anaerobic digestion studies were carried out with tannery excess secondary sludge obtained from common effluent treatment plant. The excess sludge...     

Effect of compression ratio,nozzle opening pressure,engine load,and butanol addition on nanoparticle emissions from a non-road diesel engine

Currently, diesel engines are more preferred over gasoline engines due to their higher torque output and fuel economy. However, diesel engines confront major challenge of meeting the future stringent emission norms (especially soot particle emissions) while maintaining the same fuel economy. In this study, nanosize range soot particle emission characteristics of a stationary (non-road) diesel engine have been experimentally investigated. Experiments are conducted at a constant speed of 1500 rpm for three compression ratios and nozzle opening pressures at different engine loads. In-cylinder pressure history for 2000 consecutive engine cycles is recorded and averaged data is used for analysis of combustion characteristics. An electrical mobility-based fast particle sizer is used for analyzing particle size and mass distributions of engine exhaust particles at different test conditions. Soot particle distribution from 5 to 1000 nm was recorded. Results show that total particle concentration decreases with an increase in engine operating loads. Moreover, the addition of butanol in the diesel fuel leads to the reduction in soot particle concentration. Regression analysis was also conducted to derive a correlation between combustion parameters and particle number emissions for different compression ratios. Regression analysis shows a strong correlation between cylinder pressure-based combustion parameters and particle number emission.

     

Poor efficacy of herbicides in biochar-amended soils as affected by their chemistry and mode of action

We evaluated wheat straw biochar produced at 450 °C for its ability to influence bioavailability and persistence of two commonly used herbicides (atrazine and trifluralin) with different modes of action (photosynthesis versus root tip mitosis inhibitors) in two contrasting soils. The biochar was added to soils at 0%, 0.5% and 1.0% (w/w) and the herbicides were applied to those soil-biochar mixes at nil, half, full, two times, and four times, the recommended dosage (H₄). Annual ryegrass (Lolium rigidum) was grown in biochar amended soils for 1 month. Biochar had a positive impact on ryegrass survival rate and above-ground biomass at most of the application rates, and particularly at H₄. Within any given biochar treatment, increasing herbicide application decreased the survival rate and fresh weight of above-ground biomass. Biomass production across the biochar treatment gradient significantly differed (p < 0.01) and was more pronounced in the case of atrazine than trifluralin. For example, the dose-response analysis showed that in the presence of 1% biochar in soil, the value of GR₅₀ (i.e. the dose required to reduce weed biomass by 50%) for atrazine increased by 3.5 times, whereas it increased only by a factor of 1.6 in the case of trifluralin. The combination of the chemical properties and the mode of action governed the extent of biochar-induced reduction in bioavailability of herbicides. The greater biomass of ryegrass in the soil containing the highest biochar (despite having the highest herbicide residues) demonstrates decreased bioavailability of the chemicals caused by the wheat straw biochar. This work clearly demonstrates decreased efficacy of herbicides in biochar amended soils. The role played by herbicide chemistry and mode of action will have major implications in choosing the appropriate application rates for biochar amended soils.     

Abiotic degradation (photodegradation and hydrolysis) of imidazolinone herbicides

The abiotic degradation of the imidazolinone herbicides imazapyr, imazethapyr and imazaquin was investigated under controlled conditions. Hydrolysis, where it occurred, and photodegradation both followed first-order kinetics for all herbicides. There was no hydrolysis of any of the herbicides in buffer solutions at pH 3 or pH 7; however, slow hydrolysis occurred at pH 9. Estimated half-lives for the three herbicides in solution in the dark were 6.5, 9.2 and 9.6 months for imazaquin, imazethapyr and imazapyr, respectively. Degradation of the herbicides in the light was considerably more rapid than in the dark with half lives for the three herbicides of 1.8, 9.8 and 9.1 days for imazaquin, imazethapyr and imazapyr, respectively. The presence of humic acids in the solution reduced the rate of photodegradation for all three herbicides, with higher concentrations of humic acids generally having greater effect. Photodegradation of imazethapyr was the least sensitive to humic acids. The enantioselectivity of photodegradation was investigated using imazaquin, with photodegradation occurring at the same rate for both enantiomers. Abiotic degradation of imidazolinone herbicides on the soil surface only occurred in the presence of light. The rate of degradation for all herbicides was slower than in solution, with half-lives of 15.3, 24.6 and 30.9 days for imazaquin, imazethapyr and imazapyr, respectively. Abiotic degradation of these herbicides is likely to be slow in the environment and is only likely to occur in clear water or on the soil surface.     

Sorption–desorption of indaziflam and its three metabolites in sandy soils

Indaziflam is a relatively new herbicide for which sorption–desorption information is lacking, and nothing is available on its metabolites. Information is needed on the multiple soil and pesticide characteristics known to influence these processes. For four soils, the order of sorption was indaziflam (N-[1R,2S)-2,3-dihydro-2,6-dimethyl-1H-inden-1-yl]-6-[(1R)-1-fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: K_f = 5.9, 1/n_f = 0.7, K_foc = 447; sandy loam: K_f = 3.9, 1/n_f = 0.9, K_foc = 276) > triazine indanone metabolite (N-[(1R,2S)-2,3-dihydro-2,6-dimethyl-3-oxo-1H-inden-1-yl]-6-[(1R)-1-fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: K_f = 2.1, 1/n_f = 0.8, K_foc = 177; sandy loam: K_f = 1.7, 1/n_f = 0.9, K_foc = 118) > fluoroethyldiaminotriazine metabolite (6-[(1R-1-Fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: K_f = 0.3, 1/n_f = 0.9, K_foc = 28; sandy loam: K_f = 0.3, 1/n_f = 0.9, K_foc = 22) = indaziflam carboxylic acid metabolite (2S,3R)-3-[[4-amino-6-[(1R)-1-fluoroethyl]-1,3,5-triazin-2-yl]amino]-2,3-dihydro-2-methyl-1H-indene-5-carboxylic acid) (sandy clay loam: K_f = 0.3, 1/n_f = 0.9, K_foc = 22; sandy loam: K_f = 0.5, 1/n_f = 0.8, K_foc = 32). The metabolites being more polar than the parent compound showed lower sorption. Desorption was hysteretic for indaziflam and triazine indanone metabolite, but not for the other two metabolites. Unsaturated transient flow K_d's were lower than batch K_d's for indaziflam, but similar for fluoroethyldiaminotriazine metabolite. Batch K_d's would overpredict potential offsite transport if desorption hysteresis is not taken into account.     

Soil, water and nutrient conservation in mountain farming systems: case-study from the Sikkim Himalaya

The Khanikhola watershed in Sikkim is agrarian with about 50% area under rain-fed agriculture representing the conditions of the middle mountains all over the Himalaya. The study was conducted to assess overland flow, soil loss and subsequent nutrient losses from different land uses in the watershed, and identify biotechnological inputs for management of mountain farming systems. Overland flow, soil and nutrient losses were very high from open agricultural (cropped) fields compared to other land uses, and more than 72% of nutrient losses were attributable to agriculture land use. Forests and large cardamom agroforestry conserved more soil compared to other land uses. Interventions, like cultivation of broom grass upon terrace risers, N2-fixing Albizia trees for maintenance of soil fertility and plantation of horticulture trees, have reduced the soil loss (by 22%). Soil and water conservation values (> 80%) of both large cardamom and broom grass were higher compared to other crops. Use of N2-fixing Albizia tree in large cardamom agroforestry and croplands contributed to soil fertility, and increased productivity and yield. Bio-composting of farm resources ensured increase in nutrient availability specially phosphorus in cropped areas. Agricultural practices in mountain areas should be strengthened with more agroforestry components, and cash crops like large cardamom and broom grass in agroforestry provide high economic return and are hydroecologically sustainable.     

Estimation of Heavy Metals in Different Berberis Species and Its Market Samples

Popularity of herbal drugs is increasing all over the world because of lesser side effects as compared to synthetic drugs. Besides, it costs less and easily available to poor people particularly in developing countries. But quality assurance of herbal drugs is very necessary prior to its use. Because in today's polluted environment, even herbal drugs are not safe. Berberis spp. is very important medicinal plant, having various medicinal properties. It is also included in Indian and British pharmacopoeias. Its demand is quite high in herbal drug market. So, to check the quality of market samples of this drug, ten different samples were procured from different drug markets of India for heavy metal estimation. Besides, genuine samples of four species of Berberis viz. B. aristata, B. chitria, B. lycium, B. asiatica were also collected from natural habitats to compare heavy metal concentration in both market and genuine samples. It was found that market samples were much more contaminated than genuine samples. Lead (Pb) concentration is far beyond from WHO permissible limit (10 ppm) for herbal drugs, reaching to maximum 49.75 ppm in Amritsar market sample. Likewise, concentration of all other metals like Cd, Cr and Ni were also very high in market samples as compared to genuine samples.     

Modulation of cadmium uptake and toxicity in Spirodela polyrrhiza (L.) schleiden due to malathion

Fronds of Spirodela polyrrhiza were treated with different concentrations of Cd and malathion singly and in combinations. Results showed that Cd toxicity was more than malathion. The chlorophyll content was more severely affected by Cd (EC-50 of >1.0 µg ml^–1); however, its toxicity was ameliorated in the presence of malathion (EC-50 of 2.0 µg ml^–1). Although biomass and frond numbers were least affected by these toxicants, at initial treatment durations fronds multiplication was more severely affected than biomass with an increase in treatment durations. The importance of these findings have been discussed in relation to metal abatement and biomonitoring.NBRI Publication No. (432) NS.