Assessment of coastal dune characteristics using georadar imaging and sedimentological analysis: Odisha and Visakhapatnam, India

The East coast of India is subject to continuous changes by high energy events. We sought to assess the depositional conditions along the coast from the geophysical and sedimentological character of the dune sands of the Gopalpur and Paradeep coast of Odisha, and the Sagarnagar coast of North Visakhapatnam. Quartz layers of the heavy mineral-rich zone collected at a depth of ~2 m from the landward foot of the dunes in the Visakhapatnam and Odisha coast, gave the OSL age estimates as 1,050?±?50 and 260?±?10 years respectively, revealing that the age of the dunes in Visakhapatnam are older than those on the Odisha coast. Episodic high energy events have affected the coast. Evidence from ground penetrating radar data consists of three stratigraphic units. The upper unit consists of vague reflections, parallel to the ground in continuous manner, most probably formed by wind action. On the other hand, the middle layer shows high amplitude reflections of heavy mineral-rich massive layers, possibly the result of tsunami activity. The lower massive layer parallel to the ground surface shows a low reflection pattern. The GPR studies showed that the thickness of the heavy mineral layers is greater on the landward foot of the dune as compared to that on the seaward side. According to the grain size analysis, the dune is composed of both wind generated and tsunamigenic sediments. The scanning electron microscope studies revealed that the heavy minerals present in the dunes are mainly sillimanite, ilmenite, garnet, pyroxene, rutile, sphene, biotite, hornblende, zircon, monazite and magnetite. The study demonstrates the origin of sand dunes in different ages along the East Coast of India by the effect of various natural phenomena.     

Performance Evaluation of Human-Specific Viral Markers and Application of Pepper Mild Mottle Virus and CrAssphage to Environmental Water Samples as Fecal Pollution Markers in the Kathmandu Valley,Nepal

Monitoring of environmental water is crucial to protecting humans and animals from possible health risks. Although numerous human-specific viral markers have been designed to track the presence of human fecal contamination in water, they lack adequate sensitivity and specificity in different geographical regions. We evaluated the performances of six human-specific viral markers [Aichi virus 1 (AiV-1), human adenoviruses (HAdVs), BK and JC polyomaviruses (BKPyVs and JCPyVs), pepper mild mottle virus (PMMoV), and crAssphage] using 122 fecal-source samples collected from humans and five animal hosts in the Kathmandu Valley, Nepal. PMMoV and crAssphage showed high sensitivity (90–100%) with concentrations of 4.5–9.1 and 6.2–7.0 log₁₀ copies/g wet feces (n = 10), respectively, whereas BKPyVs, JCPyVs, HAdVs, and AiV-1 showed poor performances with sensitivities of 30–40%. PMMoV and crAssphage were detected in 40–100% and 8–90%, respectively, of all types of animal fecal sources and showed no significantly different concentrations among most of the fecal sources (Kruskal–Wallis test, P > 0.05), suggesting their applicability as general fecal pollution markers. Furthermore, a total of 115 environmental water samples were tested for PMMoV and crAssphage to identify fecal pollution. PMMoV and crAssphage were successfully detected in 62% (71/115) and 73% (84/115) of water samples, respectively. The greater abundance and higher mean concentration of crAssphage (4.1 ± 0.9 log₁₀ copies/L) compared with PMMoV (3.3 ± 1.4 log₁₀ copies/L) indicated greater chance of detection of crAssphage in water samples, suggesting that crAssphage could be preferred to PMMoV as a marker of fecal pollution.

     

Inverse Modeling for Aquatic Source and Transport Parameters Identification and its Application to Fukushima Nuclear Accident

Inverse modeling technique based on nonlinear least square regression method (LSRM) is developed for the identification of aquatic source and transport parameters. Instantaneous line source release model in two-dimensional domain and continuous point source release model in three-dimensional domain are used for the purpose. Case studies have been carried out for both types of releases to illustrate their application. Error analysis has been carried out to identify the maximum error that can be tolerated in the input concentration data used in the inverse model and to specify the minimum number of sampling points to generate such input data. The LSRM is compared with the well-established correlation coefficient optimization method for instantaneous line source release model, and good comparison is observed between them. The LSRM is used to quantitatively estimate the releases of different radionuclides into the Pacific Ocean which has resulted due to the discharge of highly radioactive liquid effluent from the affected Daiichi Nuclear Power Station at Fukushima in Japan. The measured concentrations of these radionuclides in seawater samples collected from two sampling points near Fukushima are used for the estimation. The average release works out to be 1.09?×?10¹⁶ for ¹³¹I, 3.4?×?10¹⁵ Bq for ¹³⁴Cs, and 3.57?×?10¹⁵ Bq for ¹³⁷Cs. Very good agreement is observed between the releases estimated in this study and those estimated by other different agencies.     

Wilk’s Method Based Model for Regulations Related to Radiological Impact of Opencast Uranium Mining on Water Reservoirs

Opencast mining of uranium may lead to natural erosion of ore material due to overland flow of water accumulated from rainfall. The overland flow may ultimately reach the nearby surface water body. This process may lead to the release of ²³⁸U and its daughter products into the surface water body. A model is developed to assess the radiological impact of the erosion in terms of dose through drinking water pathway due to ²³⁸U and its progeny in the surface water body. The in-growth of progeny is taken into account using Bateman equations. The study brings out the importance of incorporating decay chain transport in the radiological impact assessment studies. It is also observed that ²¹⁰Po, ²¹⁰Pb, ²²⁶Ra, and ²³⁰Th together contribute to about 95.5 % of the total dose. The model is then extended to incorporate the uncertainty associated with the dose due to consumption of the reservoir water by employing Wilk’s Method. Such a model can be very useful in establishing regulations related to dose through drinking water pathway around an opencast mine. Wilk’s method is computationally less expensive as compared to the exact methods like Monte Carlo method. Wilk’s method is used to calculate a value greater than α percentile value for the dose to the public due to ²³⁸U and its progeny in the reservoir through drinking water pathway with confidence level β (α/β value). When applied to a hypothetical case using some literature data on surface water bodies, it is found that with increase in the value of α or β, the α/β value in general, shows an increasing trend as expected. Depending upon the nature of the problem under study, one can calculate an α/β value i.e. 95/95 value, 99/95 value etc., and that value can be helpful in establishing the regulatory limiting value. Also, the α/β value can be used to check whether dose due to a particular radioactive release is within the specified limits.     

Carbon sequestration in reclaimed manganese mine land at Gumgaon, India

Carbon emission is supposed to be the strongest factor for global warming. Removing atmospheric carbon and storing it in the terrestrial biosphere is one of the cost-effective options, to compensate greenhouse gas emission. Millions of acres of abandoned mine land throughout the world, if restored and converted into vegetative land, would solve two major problems of global warming and generation of degraded wasteland. In this study, a manganese spoil dump at Gumgaon, Nagpur in India was reclaimed, using an integrated biotechnological approach (IBA). The physicochemical and microbiological status of the mine land improved after reclamation. Soil organic carbon (SOC) pool increased from 0.104% to 0.69% after 20 years of reclamation in 0–15 cm spoil depth. Soil organic carbon level of reclaimed site was also compared with a native forestland and agricultural land. Forest soil showed highest SOC level of 1.11% followed by reclaimed land and agriculture land of 0.70% and 0.40%, respectively. Soil profile studies of all three sites showed that SOC pool decreased from 0–15, 15–30, and 30–45 cm depths. Although reclaimed land showed less carbon than forestland, it showed better SOC accumulation rate. Reclamation of mine lands by using IBA is an effective method for mitigating CO₂ emissions.     

Distribution of organochlorine pesticides and heavy metal residues in fish and shellfish from Calicut region, Kerala, India

Fish collected from five different locations from the Calicut region, India were analysed for the levels of organochlorine pesticides (OCPs) and heavy metal (HM) residues in order to elucidate the status of these chemical contaminants in fish and shellfish meant for human consumption. The highest concentrations of OCPs detected in the edible portion of fish were 10.47, 70.57 and 28.35 ng g-1 wet weight, in marine, brackish water and freshwater, respectively. BHC and heptachlor epoxide formed the major share of OCPs in the marine fish while BHCs contributed to the major share in the freshwater and brackish water fish. The DDT (sum of DDT and its metabolites) ranged from 0.05 to 8 ng g-1 in the samples irrespective of the habitat. Among the HMs, Cu, Zn, Mn and Cr were present in the samples irrespective of the place of collection. About 22% of the samples from the freshwater area contained marginally higher lead content above the legal limit of 0.2-0.4 microg g-1. The Cr content ranged from 0.1 to 1.1 microg g-1 in the fish with marginally higher content in the fish from freshwater and marine regions (0.55-1.1 microg g-1). Mercury was detected in the samples (55%) from marine habitat only. The concentrations of OCPs and HMs in the samples, in general, were below the maximum residual level recommended by various organizations.     

From robustness to resilience: avoiding policy traps in the long term

The likelihood of being faced with trap-like situations is a worrisome aspect of long-term policy-making, such as for climate change adaptation. Even when a policy may be effective in the short-term, changes in problem or policy contexts may render it ineffective over time. The design of ‘robust’ policies, meaning those which are able to self-adjust to linear changes in their environment, can be contrasted with ‘resilient’ ones which are able to adjust not only to linear, but also non-linear shifts in their contexts. Building on Boonstra and de Boer (AMBIO 43:260–274, 2014)’s argument that traps should not be considered as a static phenomenon; rather their emergence and development is often directly influenced by history and path-dependency, this paper elaborates how trap-like situations can emerge with increase in climate uncertainty over time. Three strategies to address policy traps due to climate change form subjects of inquiry in this paper: avoiding traps in the first place, designing against traps, and overcoming traps once in them. Each requires a specific type of design thinking and practice.     

Glutathione antioxidant status of frozen meat samples

Lipid oxidation is a process, which results in rancidity and deterioration of fats posing a major problem in food industry. Antioxidants are of interest, which presumably protects food from oxidative deterioration during storage. The glutathione antioxidant system of different meat samples were noticed for six months under refrigerated storage. Activity of glutathione reductase (GR) and level of glutathione (GSH) decreased during six months storage in all the four meat samples. The glutathione peroxidase (GSH-Px) and glutathione-S-transferase (GST) activity increased gradually during storage. It seems possible that glutathione antioxidant system protected the meat samples against quality loss during its storage.     

Observations on the biochemical changes in gonads and other organs of Uca annulipes,Portunus pelagicus and Metapenaeus affinis (Decapoda: Crustacea) during the reproductive cycle

The fluctuations in biochemical constituents such as water, nitrogen, non-protein nitrogen, protein, lipid and glycogen in gonad, muscle and hepatopancreas have been followed in 3 decapod crustaceans, Uca annulipes (Latreille), Portunus pelagicus (Linnaeus) and Metapenaeus affinis (Milne-Edwards). The water and ash content of the entire body show no systematic fluctuation in relation to the annual reproductive cycle. The water content of the ovary diminishes as it matures. In the ovary of these crustaceans, the lipid fluctuated greatly in relation to the reproductive cycle. The maturing ovary contains more lipid than an immature or spent ovary per unit tissue weight. The changes in the biochemical constituents in the testis are not so pronounced as in the ovary, since the testicular cycle is often drawn-out and almost continuous in these crustaceans. There is an inverse relationship between water content and lipid content of the hepatopancreas; the greater the fat content, the lesser the water content. The hepatopancreas in these crustaceans is apparently a storage organ and contains much lipid and glycogen. At the height of the breeding season, when gonad production is intense, there is an indication of the mobilisation of at least a part of the lipid from hepatopancreas to gonad.Dissertation for the award of a Doctorate Degree of the Kerala University.Formerly the Marine Biological Laboratory.     

An improved product-process for cleaner chrome tanning in leather processing

Severe restrictions imposed by the pollution control authorities on the disposal of chromium, total dissolved solids and chlorides in tannery effluents have forced the tanners to look for low-waste, high exhaust chrome tanning salts. An improved chrome syntan with more than 90% uptake of chrome has been developed. The new product serves both as tanning and retanning agent and can be applied directly to delimed pelts thus eliminating the conventional pickling stage in the leather processing. This modified process helps to reduce the chemical oxygen demand (COD), total dissolved solids (TDS) and chlorides in the spent tan liquor by 51, 81 and 99%, respectively. The product offers full, soft leathers having shrinkage temperature comparable to conventional chrome tanned skins. Since the developed product is highly reactive, it saves time and reduces the water requirement when compared to the conventional chrome tanning method. Thus the novel product/process developed not only has advantages in reducing pollution loads but also seems to be techno-economically viable.