Metabolic responses of Azolla pinnata to cadmium stress: photosynthesis,antioxidative system and phytoremediation

This present study deals with the growth, photosynthesis, oxidative stress and phytoremediation character of Azolla pinnata L. exposed to different levels (0.05, 0.1, 0.5, 1.0, 1.5 and 2.0 mg·L^?1) of cadmium (Cd). Significant accumulation of Cd in Azolla fronds was noticed after 24 and 96 h of exposure and the accumulation rate was dose and time dependent. Growth of A. pinnata increased significantly after both exposure times with and without metal. At lower Cd doses (0.05 and 0.1 mg·L^?1), growth and photosynthesis of A. pinnata showed a marginal increase over the respective control, however, at higher Cd doses (0.5, 1.0, 1.5 and 2.0 mg·L^?1), a decreasing trend was noticed. At lower doses, Azolla fronds could counterbalance the negative effect of enhanced levels of superoxide radicals (SOR) and hydrogen peroxide (H₂O₂) through the greater activity of antioxidative enzymes. The decaresing trends in catalase and peroxidase activity at higher Cd doses suggest that Azolla fronds were not able to mitigate the negative effects of H₂O₂, hence an increase in malondialdehyde content was noticed. The study concludes that up to 0.1 ,mg·L^?1 Cd, A. pinnata can flourish and be used as biofertiliser and for phytoremedial purposes in Cd-contaminated fields; beyond this concentration poor growth may restrict its application.     

Chelating resin immobilized sawdust packed chromatographic column: Application to separation and preconcentration of lead ion

Naturally abundant rubber sawdust has been utilized as a stationary support, which after immobilization with a chelating polyelectrolyte (xylenol orange as counterion) gets converted into a suitable column packing material for isolation and enrichment of trace level target analyte, accurately detectable by the technique of differential pulse anodic stripping voltammetry. The sorbent is robust and re-usable in column-chromatography without showing any leaching and interference complications. Its unique lead ion selectivity from multielemental complex matrices (synthetic water sample, blood serum) at optimized column conditions (pH 2.5 and flow rate 0.5?mL?min^?1) mitigates the usual problems of intermetallic and readsorption effects. Effects of flow rate, pH, equilibration time, and other variables are reported. The system has advantageous feature to be used in a single-column ion chromatography with satisfactory performance. A modest attempt has been made to determine lead fractions in human blood serum samples on the bases of selective retention of ionic and labile fractions on complexing resin.     

Effect of dietary factors and environmental chemicals on intestinal drug metabolizing enzymes

The liver is the major site of metabolism of foreign chemicals, but contribution from intestinal biotransformation can influence the overall disposition of chemicals. The intestinal drug‐metabolizing enzymes are located in the endoplasmic reticulum and they possess biochemical properties similar to those of the hepatic system. In general, the rate of in vitro metabolism of drug substrates in intestines is lower than in the liver. There seem to be differences in regulation and induction of hepatic and intestinal drug‐metabolizing enzymes. The in vitro intestinal metabolism of foreign chemicals is affected by several factors including the nutritional status of the animal. Dietary components such as vitamins, lipids and vegetables can modify the activities of intestinal drug‐metabolizing enzymes. Phenobarbital or 3‐methyl‐cholanthrene (3‐MC) pre‐treatment induces the hepatic metabolism of a wide variety of drug substrates in a number of species, while the stimulation of intestinal enzymes is both substrate and species specific. Rabbit intestinal drug‐metabolizing enzymes seem to be resistant to induction by foreign chemicals.     

Performance and validation of a coupled parallel ADCIRC–SWAN model for THANE cyclone in the Bay of Bengal

An accurate prediction of near-shore sea-state is imperative during extreme events such as cyclones required in an operational centre. The mutual interaction between physical processes such as tides, waves and currents determine the physical environment for any coastal region, and hence the need of a parallelized coupled wave and hydrodynamic model. The present study is an application of various state-of-art models such as WRF, WAM, SWAN and ADCIRC used to couple and simulate a severe cyclonic storm Thane that developed in the Bay of Bengal during December 2011. The coupled model (ADCIRC–SWAN) was run in a parallel mode on a flexible unstructured mesh. Thane had its landfall on 30 December, 2011 between Cuddalore and Pondicherry where in-situ observations were available to validate model performance. Comprehensive experiment on the impact of meteorological forcing parameters with two forecasted tracks derived from WRF model, and JTWC best track on the overall performance of coupled model was assessed. Further an extensive validation experiment was performed for significant wave heights and surface currents during Thane event. The significant wave heights measured along satellite tracks by three satellites viz; ENVISAT, JASON-1 and JASON-2, as well in-situ near-shore buoy observation off Pondicherry was used for comparison with model results. In addition, qualitative validation was performed for model computed currents with HF Radar Observation off Cuddalore during Thane event. The importance of WRF atmospheric model during cyclones and its robustness in the coupled model performance is highlighted. This study signifies the importance of coupled parallel ADCIRC–SWAN model for operational needs during extreme events in the North Indian Ocean.     

A dynamic model for costing disaster mitigation policies

The optimal level of investment in mitigation strategies is usually difficult to ascertain in the context of disaster planning. This research develops a model to provide such direction by relying on cost of quality literature. This paper begins by introducing a static approach inspired by Joseph M. Juran's cost of quality management model (Juran, 1951) to demonstrate the non‐linear trade‐offs in disaster management expenditure. Next it presents a dynamic model that includes the impact of dynamic interactions of the changing level of risk, the cost of living, and the learning/investments that may alter over time. It illustrates that there is an optimal point that minimises the total cost of disaster management, and that this optimal point moves as governments learn from experience or as states get richer. It is hoped that the propositions contained herein will help policymakers to plan, evaluate, and justify voluntary disaster mitigation expenditures.     

A comparative study on valuable products: bio-oil,biochar, non-condensable gases from pyrolysis of agricultural residues

Journal of Material Cycles and Waste Management - In this study, pyrolysis of agricultural residues, such as rice straw (RS), wheat straw (WS), and sugarcane bagasse (SB), was performed in a...     

High bat (Chiroptera) diversity in the Early Eocene of India

The geographic origin of bats is still unknown, and fossils of earliest bats are rare and poorly diversified, with, maybe, the exception of Europe. The earliest bats are recorded from the Early Eocene of North America, Europe, North Africa and Australia where they seem to appear suddenly and simultaneously. Until now, the oldest record in Asia was from the Middle Eocene. In this paper, we report the discovery of the oldest bat fauna of Asia dating from the Early Eocene of the Cambay Formation at Vastan Lignite Mine in Western India. The fossil taxa are described on the basis of well-preserved fragments of dentaries and lower teeth. The fauna is highly diversified and is represented by seven species belonging to seven genera and at least four families. Two genera and five species are new. Three species exhibit very primitive dental characters, whereas four others indicate more advanced states. Unexpectedly, this fauna presents strong affinities with the European faunas from the French Paris Basin and the German Messel locality. This could result from the limited fossil record of bats in Asia, but could also suggest new palaeobiogeographic scenarios involving the relative position of India during the Early Eocene.     

Utilization of agricultural waste biomass and recycling toward circular bioeconomy

Environmental Science and Pollution Research - The major global concern on energy is focused on conventional fossil resources. The burning of fossil fuels is an origin of greenhouse gas emissions...     

Modeling Changes to Streamflow,Sediment, and Nutrient Loading from Land Use Changes Due to Potential Natural Gas Development

Natural gas development using hydraulic fracturing has many potential environmental impacts, but among the most certain is the land disturbance required to build the well pads and other infrastructure required to drill and extract the gas. We used the Soil and Water Assessment Tool (SWAT) model to investigate how natural gas development could impact streamflow and sediment, total nitrogen (TN), and total phosphorous (TP) loadings in the upper Delaware River Basin (DRB), a relatively undeveloped watershed of 7,950 km² that lies above the Marcellus Shale formation. If gas development was permitted, our projections show the DRB could experience development of over 600 well pads to extract natural gas at build out, which, with supporting infrastructure (roads, gathering pipelines), could convert over 5,000 ha from existing land uses in the study area. In subbasins with development activity we found sediment, TN, and TP yields could increase by an average of 15, 0.08, and 0.03 kg/ha/yr, respectively (an increase of 2, 3, and 15%, respectively) for each one percent of subbasin land area converted into natural gas infrastructure. At the study area outlet on the Delaware River at Port Jervis, New York, we found increases in the annual average streamflow and sediment, nitrogen, and phosphorus loads of up to 0.01, 0.2, 0.2, and 1%, respectively, for a rapid development year, and 0.08, 1.3, 2.0, and 11%, respectively, for the full development scenario. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.