Melamine-based organoclay to sequester atrazine

Sequestration of aqueous atrazine by organoclays prepared from the surfactant 6-piperazin-1-yl-N,N'-bis-(1,1,3,3-tetramethyl-butyl)-(1,3,5)triazine-2,4-diamine and Gonzales bentonite was assessed using 14C-labeled atrazine. Organoclays with varying ratios of surfactant to clay were evaluated with respect to their ability to sequester atrazine from an aqueous solution. Organoclays containing 100-200 g kg-1 surfactant on a total weight basis provided the most efficient adsorption of atrazine, with apparent KOC values exceeding 5000 l kg-1 at these loading fractions. Less than 12% of sequestered atrazine was released during four sequential day long washings, supporting our expectation that the majority of the reaction of atrazine with the surfactant lead to irreversible chemical bond formation through nucleophilic aromatic substitution.     

Brominated flame retardant concentrations and trends in abiotic media

BFR burdens in abiotic media have been less studied than in biota, despite their essential value as an aide to identifying sources, temporal and geographic trends and exposure routes. Many polymer products consist of several percent by weight of BFRs. Global trade in these can result in rapid and wholesale BFR movement. Loss from in-use products of nonreactive BFRs may be important, particularly in respect to indoor exposure. In the case of BDE-209, discharges from publicly owned treatment works may be substantial. BFR burdens in air, water and sewage sludge respond rapidly to changes in environmental BFR inputs. PBDEs have been the most widely studied. In many locales PBDE burdens in these media now surpass those of PCBs. Air and water near sources and urban areas are typically enriched relative to rural locales. The more volatile PBDEs dominate in the vapor phase, while BDE-209 typically predominates on particulates. Evidence exists for long-range transport of the more volatile PBDEs. A greater diversity of BFRs (mostly PBDEs, HBCD and TBBP-A) has been detected in sewage sludges. Land application of these sludges on agricultural fields is one conduit for soil contamination. In general, environmental concentrations of BDE-209 appear to be increasing, while penta-BDE burdens in Europe may have peaked. Sediments function as longer-term integrators of environmental burdens. Concentrations of common BFRs therein may be substantial near point sources. Evidence for debromination in the environment has been limited to date. However, some laboratory and field observations suggest it is possible to a limited extent.     

Nationwide monitoring of polychlorinated biphenyls and organochlorine pesticides in sediments from coastal environment of Korea

To assess the organochlorine contamination in the Korean marine environment, a nationwide monitoring study was conducted. A total of 138 surface sediments, covering the whole Korean coast, were collected and analyzed. Organochlorine compounds (OCs) were widely distributed in the Korean coastal environment, with PCB and DDT contamination being particularly prevalent. The overall concentrations of PCBs, DDTs, HCHs, CHLs, and HCB in surface sediments were in the range of 0.088-199ngg(-1) (median value: 1.56ngg(-1)), 0.006-135ngg(-1) (0.68ngg(-1)), not detected (ND)-5.46ngg(-1) (0.32ngg(-1)), ND-3.26ngg(-1) (0.14ngg(-1)), and ND-2.59ngg(-1) (0.05ngg(-1)), respectively. The southeastern coast was found to be highly contaminated. Overall contamination status of Korean coastal sediments with regard to OCs is lower than that of USA. With the exception of highly industrialized sites, Korean coastal areas in general showed similar OC concentrations to those of other Asian countries. There was a significant correlation between distributions of most organochlorine contaminants with each other. OC contamination is closely related to shipping and industrial activities. Of the 7 sites categorized as highly polluted, 4 are in a harbor zone. Adverse effects to benthic communities are expected at the levels of OC contamination observed from harbor and industrial areas.     

Remediation of contaminated agricultural soils near a former Pb/Zn smelter in Austria: batch, pot and field experiments

Metal contaminated crops from contaminated soils are possible hazards for the food chain. The aim of this study was to find practical and cost-effective measures to reduce metal uptake in crops grown on metal contaminated soils near a former metal smelter in Austria. Metal-inefficient cultivars of crop plants commonly grown in the area were investigated in combination with in-situ soil amendments. A laboratory batch experiment using 15 potential amendments was used to select 5 amendments to treat contaminated soil in a pot study using two Barley (Hordeum vulgare L.) cultivars that differed in their ability to accumulate cadmium. Results from this experiment identified 3 of these amendments for use in a field trial. In the pot experiment a reduction in ammonium nitrate extractable Cd (<41%) and Pb (<49%) compared to the controls was measured, with a concurrent reduction of uptake into barley grain (Cd<62%, Pb<68%). In the field extractable fractions of Cd, Pb, and Zn were reduced by up to 96%, 99%, and 99%, respectively in amended soils.     

In situ and laboratory bioassays using Poecilia reticulata Peters, 1859 in the biomonitoring of an acidic lake at Camaçari, BA, Brazil

The suitability and viability of acute in situ bioassays were investigated in the biomonitoring program of an acidic lake contaminated with sulphur residues. Responses of organisms observed in laboratory and in situ bioassays were also assessed to determine whether or not they were similar and comparable, regarding accuracy and precision. Newborn Poecilia reticulata were employed as test organisms and exposed to the same water samples under in situ and laboratory conditions. Mortality/immobility was the endpoint assessed and dead/immobile organisms were counted at various time intervals during exposure. The mean calculated LT50 values and 95% confidence intervals were 1.61 (1.36-1.87) h in the laboratory bioassays and 0.72 (0.55-0.89) h in the in situ bioassays. Statistical comparison of these values revealed a significant difference (p<0.05). In situ bioassays were more accurate than those carried out in the laboratory, demonstrating higher sensitivity and better reproduction of what occurs in nature, while laboratory bioassays were more precise.     

Evaluation of ozone-nitrogen oxides-volatile organic compound sensitivity of Cincinnati, Ohio

Ambient concentrations of ozone (O3), nitrogen oxides (NOx), total reactive nitrogen (NOy), nitric acid (HNO3), and hydrogen peroxide (H2O2) were measured during September 2003 at an urban site of Cincinnati, OH. The aim of this study was two-fold: to investigate whether O3 formation in this population exposure-type site is NOx, sensitive or volatile organic compound (VOC) sensitive and to test the practicality of using two combined observational-based methods to identify the sensitivity of O3 formation in midlevel polluted locations. The evaluation of the indicator species: NOy, O3/NOy, O3/HNO3, H2O2/ HNO3, and O3/(estimated NOx reaction products), as well as the combined hypothesis testing analysis of the weekend/weekday (WE/WD) differences of 1-hr and 8-hr average maximum O3 and of the 6:00 a.m.-9:00 a.m. average nitric oxide and NOx concentrations, show evidence that Cincinnati is likely VOC sensitive. Average WE 1-hr and 8-hr maximum O3, as well as duration of WE O3 accumulation, were not lower than the corresponding WD levels in spite of the observed significant reduction in NO, emissions on WE, a typical situation in VOC-sensitive locations. The possibility that the seasonal transition from summer to autumn could have influenced the results was also investigated through an exploratory analysis of the afternoon O3 maximum/NOx measured and of the WE/WD differences of peak O3 and morning average NO and NO, concentrations observed at this site from June through September 2003. The results suggest that a VOC-sensitive chemistry regime dominated along the summer season. The findings of this study suggest that additional reductions in regional NO, emissions in Cincinnati, a potential nonattainment area under the 8-hr O3 standard, may cause an increase in local O3. Future strategies to reduce O3 in Southwest Ohio should be further evaluated carefully. The combination of observational-based methods might provide a consistent complementary approach in the identification of the NO,-VOC sensitive characteristics of mid-to-moderate polluted urban areas.     

State of energy consumption and CO2 emission in Bangladesh

Carbon dioxide (CO2) is one of the most important gases in the atmosphere, and is necessary for sustaining life on Earth. It is also considered to be a major greenhouse gas contributing to global warming and climate change. In this article, energy consumption in Bangladesh is analyzed and estimates are made of CO2 emission from combustion of fossil fuel (coal, gas, petroleum products) for the period 1977 to 1995. International Panel for Climate Change guidelines for national greenhouse gas inventories were used in estimating CO2 emission. An analysis of energy data shows that the consumption of fossil fuels in Bangladesh is growing by more than 5% per year. The proportion of natural gas in total energy consumption is increasing, while that of petroleum products and coal is decreasing. The estimated total CO2 release from all primary fossil fuels used in Bangladesh amounted to 5072 Gigagram (Gg) in 1977, and 14 423 Gg in 1995. The total amounts of CO2 released from petroleum products, natural gas, and coal in the period 1977-1995 were 83 026 Gg (50% of CO2 emission), 72 541 Gg (44% of CO2 emission), and 9545 Gg (6% CO2 emission), respectively. A trend in CO2 emission with projections to 2070 is generated. In 2070, total estimated CO2 emission will be 293 260 Gg with a current growth rate of 6.34% y . CO2 emission from fossil fuels is increasing. Petroleum products contribute the majority of CO2 emission load, and although the use of natural gas is increasing rapidly, its contribution to CO2 emission is less than that of petroleum products. The use of coal as well as CO2 emission from coal is expected to gradually decrease.     

Phytostabilization of a metal contaminated sandy soil. I: Influence of compost and/or inorganic metal immobilizing soil amendments on phytotoxicity and plant availability of metals

In a lysimeter set-up, compost addition to an industrial contaminated soil slightly reduced phytotoxicity to bean seedlings. The "Phytotoxicity Index" (on a scale from 1 to 4) decreased from 3.5 to 2.8. The same treatment also reduced metal accumulation in grasses: mean Zn, Cd and Pb concentrations decreased respectively from 623 to 135, from 6.2 to 1.3 and from 10.7 to <6 mg kg-1 dry weight. When combined with inorganic metal immobilizing amendments, compost had a beneficial effect on plant responses additional to the inorganic amendments alone. Best results were obtained when using compost (C)+cyclonic ashes (CA)+steel shots (SS). The "Phytotoxicity Index" decreased to 1.7, highest diversity of spontaneously colonizing plants occurred, and metal accumulation in grasses reduced to values for uncontaminated soils. Based on the first year evaluation, C+CA+SS showed to be an efficient treatment for amendment assisted phytostabilization of the contaminated Overpelt soil.     

Genotypic variations in the accumulation of Cd, Cu, Pb and Zn exhibited by six commonly grown vegetables

Metal contaminants in garden and allotment soils could possibly affect human health through a variety of pathways. This study focused on the potential pathway of consumption of vegetables grown on contaminated soil. Five cultivars each of six common vegetables were grown in a control and in a soil spiked with Cd, Cu, Pb and Zn. Highly significant differences in metal content were evident between cultivars of a number of vegetables for several of the contaminants. Carrot and pea cultivars exhibited significant differences in accumulated concentrations of Cd and Cu with carrot cultivars also exhibiting significant differences in Zn. Distinctive differences were also identified when comparing one vegetable to another, legumes (Leguminosae) tending to be low accumulators, root vegetables (Umbelliferae and Liliaceae) tending to be moderate accumulators and leafy vegetables (Compositae and Chenopodiaceae) being high accumulators.     

Evaluation of diffusive gradients in thin film (DGT) samplers for measuring contaminants in the Antarctic marine environment

This work has been the first application of DGT samplers for measuring metals in water and sediment porewater in the Antarctic environment, and whilst DGT water sampling was restricted to quantification of Cd, Fe and Ni, preconcentration using Empore chelating disks provided results for an additional nine elements (Sn, Pb, Al, Cr, Mn, Co, Cu, Zn, As). Although higher concentrations were measured for some metals (Cd, Ni, Pb) using the Empore technique, most likely due to particulate-bound or colloidal species becoming entrapped in the Empore chelating disks, heavy metal concentrations in the impacted Brown Bay were found to be comparable with the non-impacted O'Brien Bay. Sediment porewater sampling using DGT also indicated little difference between Brown Bay and O'Brien Bay for many metals (Cd, Al, Cr, Co, Ni, Cu), however, greater amounts of Pb, Mn, Fe and As were accumulated in DGT probes deployed in Brown Bay compared with O'Brien Bay, and a higher accumulation of Sn was observed in Brown Bay inner than any of the other three sites sampled. Comparison of DGT derived porewater concentrations with actual porewater concentrations showed limited resupply of Cd, Pb, Al, Cr, Mn, Co, Ni, Cu, Zn and As from the solid phase to porewater, with these metals appearing to be strongly bound to the sediment, however, resupply of Fe and Sn was apparent. Based upon our observations here, we suggest that Sn, and to a lesser extent Pb, are critical contaminants.