Community air monitoring for pesticides. Part 3: using health-based screening levels to evaluate results collected for a year

The CA Department of Pesticide Regulation (CDPR) and the CA Air Resources Board monitored 40 pesticides, including five degradation products, in Parlier, CA, to determine if its residents were exposed to any of these pesticides and, if so, in what amounts. They included 1,3-dichloropropene, acrolein, arsenic, azinphos-methyl, carbon disulfide, chlorpyrifos and its degradation product, chlorthalonil, copper, cypermethrin, diazinon and its degradation product, dichlorvos, dicofol, dimethoate and its degradation product, diuron, endosulfan and its degradation product, S-ethyl dipropylcarbamothioate (EPTC), formaldehyde, malathion and its degradation product, methyl isothiocyanate (MITC), methyl bromide, metolachlor, molinate, norflurazon, oryzalin, oxyfluorfen, permethrin, phosmet, propanil, propargite, simazine, SSS-tributylphosphorotrithioate, sulfur, thiobencarb, trifluralin, and xylene. Monitoring was conducted 3 days per week for a year. Twenty-three pesticides and degradation products were detected. Acrolein, arsenic, carbon disulfide, chlorpyrifos, copper, formaldehyde, methyl bromide, MITC, and sulfur were detected in more than half the samples. Since no regulatory ambient air standards exist for these pesticides, CDPR developed advisory, health-based non-cancer screening levels (SLs) to assess acute, subchronic, and chronic exposures. For carcinogenic pesticides, CDPR assessed risk using cancer potency values. Amongst non-carcinogenic agricultural use pesticides, only diazinon exceeded its SL. For carcinogens, 1,3-dichloropropene concentrations exceeded its cancer potency value. Based on these findings, CDPR has undertaken a more comprehensive evaluation of 1,3-dichloropropene, diazinon, and the closely related chlorpyrifos that was frequently detected. Four chemicals—acrolein, arsenic, carbon disulfide, and formaldehyde—sometimes used as pesticides were detected, although no pesticidal use was reported in the area during this study. Their presence was most likely due to vehicular or industrial emissions.     

Effect of temperature and humidity on formaldehyde emissions in temporary housing units

The effect of temperature and humidity on formaldehyde emissions from samples collected from temporary housing units (THUs) was studied. The THUs were supplied by the U.S. Federal Emergency Management Administration (FEMA) to families that lost their homes in Louisiana and Mississippi during the Hurricane Katrina and Rita disasters. On the basis of a previous study, four of the composite wood surface materials that dominated contributions to indoor formaldehyde were selected to analyze the effects of temperature and humidity on the emission factors. Humidity equilibration experiments were carried out on two of the samples to determine how long the samples take to equilibrate with the surrounding environmental conditions. Small chamber experiments were then conducted to measure emission factors for the four surface materials at various temperature and humidity conditions. The samples were analyzed for formaldehyde via high-performance liquid chromatography. The experiments showed that increases in temperature or humidity contributed to an increase in emission factors. A linear regression model was built using the natural log of the percent relative humidity (RH) and inverse of temperature (in K) as independent variables and the natural log of emission factors as the dependent variable. The coefficients for the inverse of temperature and log RH with log emission factor were found to be statistically significant for all of the samples at the 95% confidence level. This study should assist in retrospectively estimating indoor formaldehyde exposure of occupants of THUs.     

Assessing exposure to allied ground troops in the Vietnam War: A quantitative evaluation of the Stellman Exposure Opportunity Index model

The Exposure Opportunity Index (EOI) is a proximity-based model developed to estimate relative exposure of ground troops in Vietnam to aerially applied herbicides. We conducted a detailed quantitative evaluation of the EOI model by using actual herbicide spray missions isolated in time and space. EOI scores were calculated for each of 36 hypothetical receptor location points associated with each spray mission for 30 herbicide missions for two time periods – day of herbicide application and day 2–3 post-application. Our analysis found an enormous range of EOI predictions with 500–1000-fold differences across missions directly under the flight path. This quantitative examination of the EOI suggests that extensive testing of the model’s code is warranted. Researchers undertaking development of a proximity-based exposure model for epidemiologic studies of either Vietnam veterans or the Vietnamese population should conduct a thorough and realistic analysis of how precise and accurate the model results are likely to be and then assess whether the model results provide a useful basis for their planned epidemiologic studies.     

Operating History and Current Status of Fabric Filters in the Utility Industry

Electric utilities have made significant progress in recent years in designing and operating baghouses for collection of coal fly ash. As a result, early concerns with high operating and maintenance requirements and short bag lives are no longer an issue. With increasingly stringent air emissions regulations and imminent revision of the Clean Air Act, baghouses have become an attractive particulate collection option for utilities.

In order to keep its member utilities apprised of the latest design and operation and maintenance experience with baghouses, the Electric Power Research Institute has been conducting surveys of utility baghouse user experience. This paper presents results from the latest survey, conducted in 1989. A previous survey was conducted in 1985. The 1989 survey was conducted using questionnaires mailed to the utilities, telephone inquiries, and plant visits. This paper discusses the general trends observed in baghouse design, performance, operation and maintenance.     

Status and Future of Baghouses in the Utility Industry

Abstract

The cumulative years of service of baghouses in the electric utility industry have doubled since the last industrywide review of their operating performance. We have gathered information from all 102 operating baghouses to develop an updated record of how this technology continues to serve the electric utility industry. In general, baghouse performance has met or exceeded the expectations for controlling emissions. There are, however, wide ranges of pressure drop and bag life performance. Most operators report a long-term trend of increasing pressure drop. The life expectancy of filter bags averages 7.5 years, with more than 20% of the population achieving more than 10 years of bag life. Factors such as coal and ash properties certainly affect baghouse operation, but another reason for variations in bag life is the lack of an optimized protocol for controlling the long-term buildup of residual dustcake. We conclude that many baghouses could operate with lower pressure drop and longer bag life by optimizing the cleaning system. Dustcake weight or drag are better indicators of performance than pressure drop and should be used to develop an optimum baghouse operating protocol.     

Residential and biological exposure assessment of chemicals from a wood treatment plant

This paper evaluates the results of contamination of residents and residential homes located in close proximity to a Wood Treatment Plant. The plant has produced treated wood products continuously since 1904. The principle chemicals used to treat the wood, which is primarily used for railroad ties (oblong objects laid perpendicular to the rails to act as a base for the tracks), are creosote and pentachlorophenol. For a number of years, the plant burned treated waste wood products containing creosote and pentachlorophenol. First the plant pressure impregnates the wood with creosote and pentachlorophenol, and then the wood is stacked on open ground to allow it to air dry. Chemicals from recently treated wood ties are allowed to evaporate into the air or drip onto the ground surrounding the stacked wood. Small drainage ditches carry the liquid wastes into larger water channels where eventually the waste streams are discharged into a river adjacent to the plant. The river serves as a source of drinking water for the nearby community. Prevailing wind patterns favor a drift of air emissions from the plant's boiler stack over the nearby community and its residents. Over the past few years, the town's residents have become increasingly concerned about their health status and have voiced concerns regarding multiple health problems (including cancer), possibly associated with plant discharges. The intention of this study is to examine a representative sample of the potentially affected residents and to evaluate their residential environment for the presence of dioxin and/or its congeners. Data obtained from EPA's Toxic Release Information (TRI) database revealed the plant routinely discharged creosote, pentachlorophenol, dioxin and dioxin-like compounds into the ambient air via fugitive air emissions and surface waste waters. Sampling of household dust and water sediment within and outside of residences within a 2-mile radius of the plant revealed the presence of significantly elevated levels of dioxins, principally octachlorodibenzo-p-dioxin (OCDD) and 1,2,3,4,6,7,8-hepta-CDD. Biomonitoring of 29 subjects identified the presence of significantly elevated chlorinated dioxins and furan levels (OCDD=1049 ppt for exposed and 374 ppt for controls and 1,2,3,4,6,7,8-hepta CDD=132 ppt for exposed and 45.1 ppt for controls). These levels are consistent with exposures to pentachlorophenol in this group of subjects. And they confirm the presence of unsafe levels of chlorinated dioxins in these persons.     

Effects of Place Identity,Place Dependence,and Experience-Use History on Perceptions of Recreation Impacts in a Natural Setting

It is generally accepted that recreation use in natural environments results in some degree of negative social and environmental impact. Environmental managers are tasked with mitigating the impact while providing beneficial recreation opportunities. Research on the factors that influence visitors' perceptions of environmental and social conditions is necessary to inform sound environmental management of protected natural areas. This study examines the effect of prior experience with the setting and two dimensions of place attachment (i.e., place identity and place dependence) on visitors' perceptions of three types of recreation impacts (i.e., depreciative behavior, environmental impacts, and recreation conflict). Principal components analysis, confirmatory factor analysis, and structural equation modeling were used to test the study hypotheses using data collected from 351 visitors through on-site questionnaires (response rate of 93 percent). The results show that prior experience exhibited a moderate and significant direct positive effect on place identity, place dependence, and visitors' perceptions of recreation impacts. Contrary to study hypotheses and prior research, neither place dependence nor place identity exhibited a significant effect on the dependent variables. The results show that prior experience causes visitors to be more sensitive to depreciative behaviors, environmental impacts, and recreation conflict. These findings raise concerns over potential visitor displacement and deterioration of site conditions. Implications for resource managers are discussed, which include education, modifying visitor use patterns, and site design strategies.     

Sediment concentration and turbidity changes during culvert removals

The concentrations of sediment and turbidity in stream water were monitored during culvert removals to determine the short term effects of road obliteration. Sediment concentration was measured at 11 stream crossings among two locations in Idaho and one in Washington. Sediment concentration immediately below the culvert outlet exceeded levels above the culvert outlet by at least three orders of magnitude at all stream crossings. Sediment yields ranged from 170 to less than 1kg in the 24-h period following culvert removal. Turbidity exceeded the regulatory limits during culvert removal at all locations monitored in this study and remained above the limits beyond the monitoring periods of 24h at four of the locations. Sediment concentrations 100m downstream of the culvert outlet were reduced by an order of magnitude, but did not change the turbidity values sufficiently to meet regulatory limits. Sediment concentrations an average of 810m downstream of the culvert outlet were similar to sediment concentrations above the culvert for the entire excavation period and turbidity regulations were met. Mitigation consisting of two straw bales placed in the stream caused a significant reduction in sediment yield from an average of 67kg to an average of 1.6kg.     

Field Testing the Riparian Ecosystem Management Model on a Riparian Buffer in the North Carolina Upper Coastal Plain

The riparian ecosystem management model (REMM) was field tested using five years (2005‐2009) of measured hydrologic and water quality data on a riparian buffer located in the Tar‐Pamlico River Basin, North Carolina. The buffer site received NO₃‐N loading from an agricultural field that was fertilized with inorganic fertilizer. Field results showed the buffer reduced groundwater NO₃‐N concentration moving to the stream over a five‐year period. REMM was calibrated hydrologically using daily field‐measured water table depths (WTDs), and with monthly NO₃‐N concentrations in groundwater wells. Results showed simulated WTDs and NO₃‐N concentrations in good agreement with measured values. The mean absolute error and Willmott's index of agreement for WTDs varied from 13‐45 cm and 0.72‐0.92, respectively, while the root mean square error and Willmott's index of agreement for NO₃‐N concentrations ranged from 1.04‐5.92 mg/l and 0.1‐0.86, respectively, over the five‐year period. REMM predicted plant nitrogen (N) uptake and denitrification were within ranges reported in other riparian buffer field studies. The calibrated and validated REMM was used to simulate 33 years of buffer performance at the site. Results showed that on average the buffer reduced NO₃‐N concentrations from 12 mg/l at the field edge to 0.7 mg/l at the stream edge over the simulation period, while the total N and NO₃‐N load reductions from the field edge to the stream were 77 and 82%, respectively.