Heavy metals in the SPM of air in the environment surrounding a ferro-alloy industrial plant in India

Prices for ferro-alloys have hardened due to the closure of plants in developed countries on account of increasingly stringent pollution control legislation, resulting in a higher cost of production. A ferro-alloy industry with a capacity of 80000 MT per annum was selected to study the nature of pollution. Because of the objectionable nature of polluting air in and around the plant it was located in a rural area where there was no other industry. The area was agriculturally active and there was no effective control system for this plant.The quality of ambient air around the plant site is discussed in this paper along with the meteorological conditions. The maximum concentration of suspended particulate matter (SPM) was 768 µg/NM³ downwind of the plant, minimum 184 µg/NM³, and the average was more than 446 µg/NM³. The presence of heavy metals, viz. Fe, Mn, Cr and Pb, was also assessed. The concentration of Fe was 50 µg/NM³ downwind and 10 µg/NM³ upwind. The concentration of other metals followed a similar trend.     

From Forest Regulation to Participatory Facilitation: Forest Employee Perspectives on Organizational Change and Transformation in India

Despite the critical role of government agencies in decentralizing natural resource governance, little work to date has focused on the organizational aspects of the responsible government bureaucracies. Based on a qualitative investigation of the perspectives of Forest Department employees involved in India's Joint Forest Management (JFM) program, this paper aims to provide an understanding of these internal dynamics. Elaborating on why bureaucracies with a learning orientation are essential if participatory natural resource management is to succeed, the paper underlines the constraints to transforming forest agencies' hierarchical work cultures. Foresters describe JFM as a radical departure from traditional forest governance, but suggest that corresponding transformation within the Forest Department has not occurred. Foresters cite as reasons: (1) a target-based incentive system that leaves little room for establishing the relationships with local people needed for collaborative management; (2) rigid rules and regulations that prevent the flexibility needed for adaptive, site-specific problem-solving; (3) a hierarchical, top-down style of communication that prevents the upper administration from learning what is happening on the ground and stifles initiative by field staff; (4) the need for a committed leadership to reverse this hierarchical culture. They point to the few such team-oriented leaders as the key to transforming the Forest Department and enabling participatory forest management to succeed. The authors also recommend accompanying changes in training and reward systems.     

A study on the factor market distortion and the carbon emission scale effect of two-way FDI

Based on the data of 30 Chinese provinces for the period from 2004 to 2015, this paper expounds the carbon emissions effect of two-way foreign direct investment (FDI) from the perspective of scale effect and factor market distortions. This study uses Kaya identity to decompose carbon emission and construct simultaneous equations model to empirically examine the factor market distortion and the carbon emission scale effect of two-way FDI. The results show that the inward foreign direct investment (IFDI) increase regional carbon emission through scale effect and also exacerbates factor market distortion in China, whereas the outward FDI trends reduce carbon emission and reduces factor market distortions in China. The study also shows that human capital, research and development (R&D), trade openness, and capital accumulation are important determinants of two-way FDI. Therefore, the study proposes that IFDI policies should focus on acquiring green technologies. In addition, the domestic enterprises should be encouraged to participate in global business.     

Groundwater pollution due to discharge of tannery effluents in Upper Palar basin, Tamilnadu, India: an assessment through mass transport modeling

The groundwater regime in Upper Palar basin, Tamilnadu has been highly contaminated in several locations due to discharge of effluents from a large number of tanneries. At some places total dissolved solids (TDS) concentration in groundwater was found as high as 8000 mg/l. Transmissivity and storativity of the regional aquifer were estimated at a few locations. The porosity and dispersivity values were not determined in the field. These parameters were assumed based on data available for similar geological formations elsewhere. The aquifer conceptualization thus arrived at formed the basis of a numerical groundwater flow model which was constructed using the finite difference method. The flow model was calibrated for steady state and then for transient condition for the period of 1984-92. The computed heads and calibrated parameters of the flow model were used to compute groundwater velocities. The migration of contaminants for a 20 year period was computed using the hydraulic heads and effective porosity value in a pathline model using FLOWPATH software. Mass transport model was constructed using Method of Characteristics (MOC) computer code in a separate model. The seepage rate of effluent is assumed at a rate of 30% of that discharged on the surface. The mass concentration of solute in the effluent reaching the water table was assumed as 40%, the same as in the surface effluent. The mass transport model was calibrated for a 20 year period. Prediction of contaminant migration from different clusters in the basin was analyzed. The prediction results indicated elevated TDS concentration of more than 4000 mg/l from most clusters. Also the area of the contaminated zone is likely to double in 20 years from contaminated zone of 1992.     

Carbon mitigation potential and costs of forestry options in Brazil,China, India,Indonesia, Mexico,the Philippines and Tanzania

This paper summarizes studies of carbon (C) mitigation potential and costs of about 40 forestry options in seven developing countries. Each study uses the same methodological approach – Comprehensive Mitigation Assessment Process (COMAP) – to estimate the above parameters between 2000 and 2030. The approach requires the projection of baseline and mitigation land-use scenarios. Coupled with data on a per ha basis on C sequestration or avoidance, and costs and benefits, it allows the estimation of monetary benefit per Mg C, and the total costs and carbon potential. The results show that about half (3.0 Pg C) the cumulative mitigation potential of 6.2 Petagram (Pg) C between 2000 and 2030 in the seven countries (about 200× 10⁶ Mg C yr^-1) could be achieved at a negative cost and the remainder at costs ranging up to $100 Mg C^-1. About 5 Pg C could be achieved, at a cost less than $20 per Mg C. Negative cost potential indicates that non-carbon revenue is sufficient to offset direct costs of these options. The achievable potential is likely to be smaller, however, due to market, institutional, and sociocultural barriers that can delay or prevent the implementation of the analyzed options.     

Nanomaterials for environmental burden reduction, waste treatment, and nonpoint source pollution control: a review

Nanomaterials are applicable in the areas of reduction of environmental burden, reduction/treatment of industrial and agricultural wastes, and nonpoint source (NPS) pollution control. First, environmental burden reduction involves green process and engineering, emissions control, desulfurization/denitrification of nonrenewable energy sources, and improvement of agriculture and food systems. Second, reduction/treatment of industrial and agricultural wastes involves converting wastes into products, groundwater remediation, adsorption, delaying photocatalysis, and nanomembranes. Third, NPS pollution control involves controlling water pollution. Nanomaterials alter physical properties on a nanoscale due to their high specific surface area to volume ratio. They are used as catalysts, adsorbents, membranes, and additives to increase activity and capability due to their high specific surface areas and nano-sized effects. Thus, nanomaterials are more effective at treating environmental wastes because they reduce the amount of material needed.     

Effect of fenvalerate technical grade on acetyl cholinesterase activity in Indian bullfrog Haplobatrachus tigerinus (Daudin)

Indian bullfrog Haplobatrachus tigerinus (Daudin) was exposed to sublethal dose (1/3 of LC50 I.E. 1.166 mg/kg) of fenvalerate technical grade and the effect was studied on the specific activity of acetyl cholinesterase in the different tissues of frog viz., brain, muscle, liver, kidney and testis at different time periods viz., 3,6, 12, 24, 48 and 72 hours. The inhibition of specific activity of acetyl cholinesterase was in the order of kidney > brain > muscle > liver > testis. A significant inhibition was noticed in kidney at 12 hours (-64.33%) and no effect was noticed at 3 hours in testis (+0.67%). The AChE activity was inhibited in first three hours of administration of fenvalerate in all the tissue tested. The inhibition continued upto 6 hours or 2 hours in different tissue but the recovery was started by 24 hours and almost completed by 72 hours.