Performance evaluation of dolomite production waste in development of sustainable concrete: hardened properties and ecological assessment

Journal of Material Cycles and Waste Management - Dolomite production waste is a by-product generated by dolomite mining, causing environmental pollution and other associated issues worldwide. In...     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

Comparative larvicidal potential of different plant parts of Withania somnifera against vector mosquitoes in the semi-arid region of Rajasthan

Larvicidal potential of the extracts from different parts viz. green and red fruits, seeds, fruit without seeds, leaves and roots of Withania somnifera in different solvents was evaluated against larvae of Anopheles stephensi, Aedes aegypti and Culex quinquefasciatus, the important disease vectors prevalent in the semi-arid region. Experiments were carried out on late 3rd or early 4th instar larvae of these mosquitoes using standard WHO technique. 24 and 48 hr LC50 values along with their 95% confidence limits, regression equation, chi-square (chi2)/heterogeneity of the response have been determined by log probit regression analysis. The 24 hr LC50 values as observed for whole green fruits in water, methanol and petroleum ether were 350.9, 372.4, 576.9; 115.0, 197.1, 554.6; 154.9, 312.0, 1085.0 while corresponding values for red fruits were 473.5, 406.4,445.2; 94.7, 94.5, 1013.0; 241.8, 535.0, 893.3 mg l(-1) for An. stephensi, Ae. aegypti and Cx. quinquefasciatus respectively showing that methanol extracts were more effective against anophelines as compared to culicines when whole fruits were taken. The 24 hr LC50 values as observed for seeds in acetone, methanol and petroleum ether were 188.1, 777.5, 822.5; 245.5, 769.0, 1169.0; 140.3, 822.9, 778.4 and for fruit without seeds were 80.2, 97.6, 146.6; 88.4, 404.4, 1030.0; 30.0, 44.5, 54.2 mg l(-1) for the above mosquito species respectively showing that extract of fruit without seeds were most effective in petroleum ether followed by acetone and methanol extracts. However, experiments conducted with methanol extracts of leaves and roots of this plant species did not show any appreciable larvicidal activity and a 20-40% mortality was observed up to 500 mg l(-1) of the extracts. Overall larvae of anophelines were found more susceptible as compared to culicines to all the extracts tested. Petroleum ether extract of fruit without seeds was found most effective against all the mosquito species showing that active ingredient might be present in this part of the plant species. The study would be of great importance while planning vector control strategy based on alternative plant derived insecticides.     

Role of bioinoculants and organic fertilizers in fodder production and quality of leguminous tree species

The comparative effect of dual inoculation of native N fixer (Rhizobium) and AM fungi consortia with different organic fertilizers (vermicompost and farm yard manure) on fodder production and quality of two leguminous tree species (Leucaena leucocephala (Lam) de. Wit. and Sesbania sesban (L.) Merr.) in silvopastoral system and their impact on the fodder production of un-inoculated Panicum maximum Jacq. under cut and carry system. After three years of plantation maximum tree survival was in L. leucocephala in all the treatments in comparison to S. sesban while fodder production was more in S. sesban for initial two years and in third year it accelerated in L. leucocephala. Dual inoculation with vermicompost significantly improved fodder production, fodder quality and rhizosphere microflora in L. leucocephala but in S. sesban dual inoculation was at par with single inoculation of N fixer, AM fungi and control (without inoculation). The grass production was higher with L. leucocephala for two years while in third year it was more with S. sesban. The association of Rhizobium with AM fungi in L. leucocephala was better than in S. sesban.     

Photodegradation of the organophosphorus herbicide “anilophos”

Photodecomposition of the organophosphorus herbicide anilophos [S‐(N‐(4‐chlorophenyl) N‐isopropyl carbaniloyl methyl] 0,0‐dimethyl phosphorodithioate has been studied in methanol. It underwent oxidation, hydrolysis and dimerisation on irradiation with U.V. light and produced a number of photoproducts which were characterised by ¹H‐NMR and Mass spectroscopy.     

Two-layer channel flow involving a fluid with time-dependent viscosity

Environmental Fluid Mechanics - A pressure-driven two-layer channel flow of a Newtonian fluid with constant viscosity (top layer) and a fluid with a time-dependent viscosity (bottom layer) is...     

Biochemical responses in tree foliage exposed to coal-fired power plant emission in seasonally dry tropical environment

A biomonitoring study was conducted to investigate the responses of plants exposed to power plant emission in a dry tropical environment. For this purpose, five sampling sites were selected in the prevailing wind direction (NE) at different distance to thermal power plant (TPP) within 8.0 km range and a reference site was selected in eastern direction at a distance of 22.0 km. The two most common tree species, Ficus benghalensis L. (Evergreen tree) and Dalbergia sisso Roxb. (deciduous tree) were selected as test plants. Ambient sulphur dioxide (SO(2)), nitrogen dioxide (NO(2)), suspended particulate matter (SPM), respirable suspended particulate matter (RSPM), dust-fall rate (DFR) and plant responses such as leaf pigments (chlorophyll a, chlorophyll b and carotenoids), ascorbic acid, sugar and sulphate-sulphur (SO4(2-)-S) contents were measured. Ambient SO(2), NO(2), SPM, RSPM and DFR showed significant spatial and temporal variation at different sites. Considerable reduction in pigment (chlorophyll a, chlorophyll b and carotenoids) and sugar contents were observed at sites receiving higher pollution load. Ascorbic acid exhibited significant positive correlation with pollution load. Accumulation of SO4(2-)-S in leaf tissue showed significant positive correlation with ambient SO(2) concentration at all the sites. At the same time, SO4(2-)-S showed significant negative correlation with pigment and sugar content. D. sisso Roxb. tree was found to be more sensitive as compared to F. benghalensis L. tree.     

Reduction of pollutants in pulp paper mill effluent treated by PCP-degrading bacterial strains

Two PCP-degrading bacterial strains, Bacillus cereus (ITRC-S6) and Serratia marcescens (ITRC-S7) were used for the treatment of pulp and paper mill effluent at conditions; 1.0% glucose and 0.5% peptone at 30 +/- 1 degrees C at 120 rpm for 168 h of incubation. These two bacterial strains effectively reduced colour (45-52%), lignin (30-42%), BOD (40-70%), COD (50-60%), total phenol (32-40%) and PCP (85-90%) within 168 h of incubation. However, the highest reduction in colour (62%), lignin (54%), BOD (70%), COD (90%), total phenol (90%) and PCP (100%) was recorded by mixed culture treatment. The bacterial mechanism for the degradation of pulp and paper mill effluent may be explained by an increase in the cells biomass using added co-substrates resulting liberation of significant amount of chloride due to bacterial dechlorination of chlorolignins and chlorophenols this showed reduction in colour, lignin and toxicity in the effluent. Further, GC-MS analysis of ethyl acetate-extractable compounds from treated pulp paper mill effluent reinforces the bacterium capability for the degradation of lignin and pentachlorophenol, as many aromatic compounds such as 2-chlorophenol, 2, 4, 6-trichlorophenol and tetrachlorohydroquinone, 6-chlorohydroxyquinol and tetrachlorohydroquinone detected which were not present in the untreated effluent.     

Magnetic mapping of fly-ash pollution and heavy metals from soil samples around a point source in a dry tropical environment

The Singrauli region in the southeastern part of Uttar Pradesh, India is one of the most polluted industrial sites of Asia. It encompasses 11 open cast coalmines and six thermal power stations that generate about 7,500 MW (about 10% of India’s installed generation capacity) electricity. Thermal power plants represent the main source of pollution in this region, emitting six million tonnes of fly-ash per annum. Fly-ash is deposited on soils over a large area surrounding thermal power plants. Fly-ashes have high surface concentrations of several toxic elements (heavy metals) and high atmospheric mobility. Fly ash is produced through high-temperature combustion of fossil fuel rich in ferromagnetic minerals. These contaminants can be identified using rock-magnetic methods. Magnetic susceptibility is directly linked to the concentration of ferromagnetic minerals, primarily high values of magnetite. In this study, magnetic susceptibility of top soil samples collected from surrounding areas of a bituminous-coal-fired power plant were measured to identify areas of high emission levels and to chart the spatial distribution of airborne solid particles. Sites close to the power plant have shown higher values of susceptibility that decreases with increasing distance from the source. A significant correlation between magnetic susceptibility and heavy metal content in soils is found. A comparison of the spatial distribution of magnetic susceptibility with heavy-metal concentrations in soil samples suggests that magnetic measurements can be used as a rapid and inexpensive method for proxy mapping of air borne pollution due to industrial activity.     

Atmospheric deposition of heavy metals (Cu, Zn, Cd and Pb) in Varanasi City, India

Rapid growth in urbanization and industrialization in developing countries may significantly contribute in heavy metal contamination of vegetables through atmospheric depositions. In the present study, an assessment was made to investigate the spatial and seasonal variations in deposition rates of heavy metals and its contribution to contamination of palak (Beta vulgaris). Samples of bulk atmospheric deposits and Beta vulgaris for analysis of Cu, Zn, Cd and Pb were collected from different sampling locations differing in traffic density and land use patterns. The results showed that the sampling locations situated in industrial or commercial areas with heavy traffic load showed significantly elevated levels of Cu, Zn and Cd deposition rate as compared to those situated in residential areas with low traffic load. The deposition rates of Cu, Zn and Cd were significantly higher in summer and winter as compared to rainy season, however, Pb deposition rate was significantly higher in rainy and summer seasons as compared to winter season. Atmospheric depositions have significantly elevated the levels of heavy metals in B. vulgaris collected during evening as compared to those collected in morning hours. The study further showed that local population has maximum exposure to Cd contamination through consumption of B. vulgaris. The present study clearly points out the urban and industrial activities of a city have potential to elevate the levels of heavy metals in the atmospheric deposits, which may consequently contaminate the food chain and thus posing health risk to the local population.