Sorption of heavy metals in strongly weathered soils: an overview

Current knowledge of sorption processes in tropical soils is reviewed. Landscapes throughout the tropics are dominated by oxisols which occupy extensive areas of potentially highly productive soils. These soils are dominated by low-activity sesquioxide minerals and clays that have variable charge surfaces. The limited information on tropical soils available suggests that the composition of the ambient soil solution can influence sorption through changes in particle surface-charge density. Thus the observed decrease in sorption in the presence of divalent index cations may be related to the effect of ionic charge on the double-layer thickness which is manifested through a change in surface-charge characteristics. However, much work needs to be done to differentiate the effect of cation charge on surface-charge density from the competitive effect between the index cation and heavy-metal ions for the sorption sites. The effects of inorganic and organic ligands on adsorption of Cd by variable charge surfaces are also reviewed.     

Assessment of acute toxicity of ��-cyhalothrin to a freshwater catfish, Clarias batrachus

Acute static bioassays were conducted for 96 h period with λ-cyhalothrin to determine its acute toxicity to a freshwater catfish, Clarias batrachus. The 96 h LC₅₀ value was estimated to be 5.00 μg l⁻¹ (95% confidence limit: 4.114–5.712). The alterations in behavioral pattern, such as change in the color of skin, hyperactivity, loss of balance, rapid swimming, increased surfacing activity, enhanced rate of opercular activity, as well as prominent rates of convulsions in treated fish were observed with the increasing concentrations of insecticide as compared to the control fish. The results indicate that λ-cyhalothrin is highly effective even at very low concentrations.     

Groundwater arsenic contamination in Brahmaputra river basin: a water quality assessment in Golaghat (Assam), India

Distribution of arsenic (As) and its compound and related toxicology are serious concerns nowadays. Millions of individuals worldwide are suffering from arsenic toxic effect due to drinking of As-contaminated groundwater. The Bengal delta plain, which is formed by the Ganga?CPadma?CMeghna?CBrahmaputra river basin, covering several districts of West Bengal, India, and Bangladesh is considered as the worst As-affected alluvial basin. The present study was carried out to examine As contamination in the state of Assam, an adjoining region of the West Bengal and Bangladesh borders. Two hundred twenty-two groundwater samples were collected from shallow and deep tubewells of six blocks of Golaghat district (Assam). Along with total As, examination of concentration levels of other key parameters, viz., Fe, Mn, Ca, Na, K, and Mg with pH, total hardness, and SO $_{4}^{2-}$ , was also carried out. In respect to the permissible limit formulated by the World Health Organization (WHO; As 0.01 ppm, Fe 1.0 ppm, and Mn 0.3 ppm for potable water), the present study showed that out of the 222 groundwater samples, 67%, 76.4%, and 28.5% were found contaminated with higher metal contents (for total As, Fe, and Mn, respectively). The most badly affected area was the Gamariguri block, where 100% of the samples had As and Fe concentrations above the WHO drinking water guideline values. In this block, the highest As and Fe concentrations were recorded 0.128 and 5.9 ppm, respectively. Tubewell water of depth 180 ± 10 ft found to be more contaminated by As and Fe with 78% and 83% of the samples were tainted with higher concentration of such toxic metals, respectively. A strong significant correlation was observed between As and Fe (0.697 at p < 0.01), suggesting a possible reductive dissolution of As?CFe-bearing minerals for the mobilization of As in the groundwater of the region.     

Effect of start of main injection timing on performance,emission, and combustion characteristics of a VGT CI engine fueled with neem biodiesel

The performance of engine parameters is more influenced with fuel injection strategies namely start of main injection timing (SoMI). An experimental analysis was performed to find the optimum SoMI timing based on performance, emission, and combustion characteristics. Base fuel of diesel and neem biodiesel was used as test fuels. The neem biodiesel was prepared by esterification and transesterification process. It is found from literature that neem biodiesel blend NB20 with diesel gives optimum performance and emission characteristics; therefore, NB20 blend was used for experiments. A variable geometry turbocharger (VGT) compression ignition (CI) engine was used to conduct the experiments. Engine performance parameters were estimated and compared with a base fuel of diesel and with NB20 blends. In this experimentation, fuel injection pressure (FIP) of 800 bar and engine speed of 1700 rpm were considered. SoMI timing was varied from 2° to 10° bTDC with an increment of 2° bTDC timing. Cylinder pressure (CP) and heat release rate (HRR) were estimated and found that are higher for diesel fuel compared to NB20 blend at different SoMI timings. The addition of neem biodiesel NB20 blend to diesel fuel decreases the exhaust emissions except NOx emissions. The BSFC was considerably reduced and BTE was improved almost equivalent to the diesel fuel for NB20. From the results, it is concluded that 10° bTDC SoMI timing provides 13% improvement in BTE, 21% decrement in BSFC, and 7.5% reduction in CO₂ emissions.

     

PFAS Experts Symposium: Statements on regulatory policy,chemistry and analytics,toxicology, transport/fate,and remediation for per‐ and polyfluoroalkyl substances (PFAS) contamination issues

Sixty leading members of the scientific, engineering, regulatory, and legal communities assembled for the PFAS Experts Symposium in Arlington, Virginia on May 20 and 21, 2019 to discuss issues related to per‐ and polyfluoroalkyl substances (PFAS) based on the quickly evolving developments of PFAS regulations, chemistry and analytics, transport and fate concepts, toxicology, and remediation technologies.  The Symposium created a venue for experts with various specialized skills to provide opinions and trade perspectives on existing and new approaches to PFAS assessment and remediation in light of lessons learned managing other contaminants encountered over the past four decades. The following summarizes several consensus points developed as an outcome of the Symposium:

• Regulatory and policy issues: The response by many states and the US Environmental Protection Agency (USEPA) to media exposure and public pressure related to PFAS contamination is to relatively quickly initiate programs to regulate PFAS sites. This includes the USEPA establishing relatively low lifetime health advisory levels for PFAS in drinking water and even more stringent guidance and standards in several states. In addition, if PFAS are designated as hazardous substances at the federal level, as proposed by several Congressional bills, there could be wide‐reaching effects including listing of new Superfund sites solely for PFAS, application of stringent state standards, additional characterization and remediation at existing sites, reopening of closed sites, and cost renegotiation among PRPs.
• Chemistry and analytics: PFAS analysis is confounded by the lack of regulatory‐approved methods for most PFAS in water and all PFAS in solid media and air, interference with current water‐based analytical methods if samples contain high levels of suspended solids, and sample collection and analytical interference due to the presence of PFAS in common consumer products, sampling equipment, and laboratory materials.
• Toxicology and risk: Uncertainties remain related to human health and ecological effects for most PFAS; however, regulatory standards and guidance are being established incorporating safety factors that result in part per trillion (ppt) cleanup objectives. Given the thousands of PFAS that may be present in the environment, a more appropriate paradigm may be to develop toxicity criteria for groups of PFAS rather than individual PFAS.
• Transport and fate: The recalcitrance of many perfluoroalkyl compounds and the capability of some fluorotelomers to transform into perfluoroalkyl compounds complicate conceptual site models at many PFAS sites, particularly those involving complex mixtures, such as firefighting foams. Research is warranted to better understand the physicochemical properties and corresponding transport and fate of most PFAS, of branched and linear isomers of the same compounds, and of the interactions of PFAS with other co‐contaminants such as nonaqueous phase liquids. Many PFAS exhibit complex transport mechanisms, particularly at the air/water interface, and it is uncertain whether traditional transport principles apply to the ppt levels important to PFAS projects. Existing analytical methods are sufficient when combined with the many advances in site characterization techniques to move rapidly forward at selected sites to develop and test process‐based conceptual site models.
• Existing remediation technologies and research: Current technologies largely focus on separation (sorption, ion exchange, or sequestration). Due to diversity in PFAS properties, effective treatment will likely require treatment trains. Monitored natural attenuation will not likely involve destructive reactions, but be driven by processes such as matrix diffusion, sorption, dispersion, and dilution.

The consensus message from the Symposium participants is that PFAS present far more complex challenges to the environmental community than prior contaminants. This is because, in contrast to chlorinated solvents, PFAS are severely complicated by their mobility, persistence, toxicological uncertainties, and technical obstacles to remediation—all under the backdrop of stringent regulatory and policy developments that vary by state and will be further driven by USEPA. Concern was expressed about the time, expense, and complexity required to remediate PFAS sites and whether the challenges of PFAS warrant alternative approaches to site cleanups, including the notion that adaptive management and technical impracticability waivers may be warranted at sites with expansive PFAS plumes. A paradigm shift towards receptor protection rather than broad scale groundwater/aquifer remediation may be appropriate.     

Evaluating multi-stakeholder perceptions of project impacts: a participatory value-based multi-criteria approach

This paper describes a participatory multi-stakeholder impact assessment approach based on the concept of a value tree (VT), generated using the value focused thinking method (VFT) developed by Keeney (1992 Keeney, R. 1992. Value-focused thinking, Cambridge, MA: Harvard University Press.  [Google Scholar]). This approach allows stakeholders to specify impact parameters to be evaluated, which in the context of the VT, are organized as goals, objectives and alternatives. The approach is implemented in two phases: Phase I is designed to formulate stakeholders' collective VT following VFT concepts and the cognitive mapping method, and Phase II is a participatory valuation approach based on the VT formed in Phase I. The VT and the VFT concepts are adopted as tools to capture different stakeholders' values, goals and perceptions. The resulting VT is structured as a hierarchy between goals and objectives, and a network consisting of relationships, linkages and cross-impacts of the different alternatives and objectives. The hierarchy and network structure enables stakeholders to decompose complex assessment problem into ‘smaller’ units, which makes for easier and clearer assessment context, without ignoring linkages of the units or assessment elements. The second phase allows stakeholders to express their preferences with respect to each assessment element, through a voting system that ultimately leads to measures of importance or relative weights associated with each element. A modified Analytic Hierarchy Process (called Analytic Network Process) was used to distill relative weights from the voting results. Results obtained from a case study in a Zimbabwean community forest show that the proposed approach is easy to implement and can address questions about whether a project can lead to a positive change in attitudes, and whether the changes actually lead to a propensity to adopt alternatives that the project supports (e.g. conservation-oriented alternatives).     

Investigation on physical properties of nanobubbled water using gas water circulation method: Environmental perspective

The objective of this present study is to examine the effect of nanobubbles on the physical properties improvement in the chosen water sample. So far, the research outcomes stated that the physical properties could be enhanced by addition of nanoparticles, but very few studies were performed with nanobubbles. The unique properties of nanobubbles (70–120 nanometers) explain their use in a wide range of engineering fields. Simple method for producing nanobubbles in a variety of aqueous solutions along with examples of their use is outlined in this work. Global environmental issues, including the deterioration and depletion of water supply are driving today's need for water treatment technology. As a solution, the use of micro- and nano-bubble (MNB) technologies in wastewater treatment has evolved. This page discuss the fundamentals of water treatment research, including their stability of bubbles, manufacturing processes, and chemical and physical features.     

Case study of testing heavy‐particle concentrator‐aided remediation of lead‐contaminated rifle shooting range soil

Trials were conducted to optimize the parameters of a heavy‐particle concentrator (HPC) for the remediation of soil stockpiles contaminated by metallic lead at the Mount Stuart training area in Townsville, Queensland, Australia. A range of treatment methods, including orbital screen, HPC, and a combination of orbital screen and HPC were evaluated. The treatment efficiency, as well as reductions in Pb and Australian Standard Teaching Procedure values, was ranked: Orbital screen + HPC < HPC < 2nd run through HPC. The combination of orbital screening, HPC, and phosphate‐aided immobilization completely remediated the stockpiled material by reducing total lead to below the Australian National Environmental Protection Measure Health Investigation Level for Soil Contaminant (Recreational; < 600 milligrams lead per kilogram). The optimized parameters of HPC at 4 tonnes per hour of the < 40 millimeter (mm) orbital screen feed fraction were: inclination angle 4°, trommel speed 1,860 revolutions per minute (rpm), HPC belt speed 3.5 rpm, material distribution chute extension 100 mm and water flow 480 liters per minute.     

Synergetic integration of laccase and versatile peroxidase with magnetic silica microspheres towards remediation of biorefinery wastewater

In this study, a tailor-made biocatalyst consisting of a co-immobilized lignolytic enzyme cascade on multi-functionalized magnetic silica microspheres (MSMS) was developed. Physical adsorption was the most promising strategy for the synthesis of individual immobilized laccase (IL), immobilized versatile peroxidase (IP), as well as co-immobilized laccase (Lac) and versatile peroxidase (VP) with an enzyme activity recovery of about 79, 93, 27, and 27.5%, respectively. Similarly, the biocatalytic load of 116, 183, 23.6, and 31 U/g was obtained for IL, IP, and co-immobilized Lac and VP, respectively. The co-immobilized enzyme system exhibited better pH stability than the free and individual immobilized system by retaining more than 100% residual activity at pH 7.0 after a 150-h incubation; whereas, the thermal stability and kinetics of the co-immobilized biocatalyst were not much improved. IL and IP could be recycled for 10 cycles after which they retained 31 and 44% of their initial activities. Co-immobilized Lac and VP were reused for ten consecutive cycles at the end of which Lac activity was depleted, and 37% of VP activity was left. Free enzymes, IL, IP, co-immobilized Lac, and VP were applied to biorefinery wastewater (BRW) in a batch study to investigate the transformation of phenolic contaminants over a period of 5 days. The major classes of phenolic constituents in terms of their order of removal in a Lac-VP system was phenol >2-chlorophenol > trichlorophenol > dichlorophenol > cresols > dimethylphenol >2 methyl- 4, 6-dinitrophenol > 4-nitrophenol > tetrachlorophenols > pentachlorophenol. The free enzymes and individually immobilized enzymes resulted in 80% dephenolization in 5 days. By contrast, the co-immobilized biocatalyst provided rapid dephenolization yielding the same 80% removal within 24 h and 96% removal of phenols in 60 h after which the system stabilized, which is the major advantage of the co-immobilized biocatalyst.

Open image in new window

? Graphical abstract

     

Study of atmospheric stagnation, recirculation and ventilation potential at Narora Atomic Power Station NPP site

The atmosphere is an important pathway to be considered in assessment of the environmental impact of radioactivity releases from nuclear facilities. The estimation of concentration of released effluents in air and possible ground contamination needs an understanding of relevant atmospheric dispersion. This paper describes the meteorological characteristics of Narora Atomic Power Station (NAPS) Nuclear Power Project site by using the integral parameters developed by Allwine and Whiteman (Atmospheric Environment 28(4):713–721, 1994). Meteorological data measured during the period 2006–2010 were analysed. The integral quantities related to the occurrence of stagnation, recirculation and ventilation characteristics were studied for the NAPS site to assess the dilution potential of the atmosphere. Wind run and recirculation factors were calculated for a 24-h transport time using 5 years of hourly surface measurements of wind speed and direction. The occurrence of stagnation, recirculation and ventilation characteristics during 2006–2010 at the NAPS site is observed to be 33.8, 19.5 and 34.7 % of the time, respectively. The presence of strong winds with predominant wind direction NW and WNW during winter and summer seasons leads to higher ventilation (48.1 and 44.3 %) and recirculation (32.6 % of the summer season). The presence of more dispersed light winds during pre-winter season with predominant wind directions W and WNW results in more stagnation (59.7 % of the pre-winter season). Thus, this study will serve as an essential meteorological tool to understand the transport mechanism of atmospheric radioactive effluent release from any nuclear industry during the pre-operational as well as operational phase.