Comparison among filter-based,impactor-based and continuous techniques for measuring atmospheric fine sulfate and nitrate

Filter-based methods for sampling aerosols are subject to great uncertainty if the gas–particle interactions on filter substrates are not properly handled. Sampling artifacts depend on both meteorological conditions and the chemical mix of the atmosphere. Despite numerous of studies on the subject, very few have evaluated filter-based methods in the Asian environments. This paper reports the results of a comparison of the performances of two filter-based samplers, including a Thermo Anderson Chemical Speciation Monitor (RAAS) and a honeycomb denuder filter-pack system, a Micro Orifice Uniform Deposit Impactor (MOUDI) and a real-time ambient ion monitor (AIM, URG9000B) in measuring atmospheric concentrations of PM_2.5 sulfate and nitrate. Field studies were conducted at an urban site in Jinan, Shandong province, during the winter of 2007 and at a rural site near Beijing in the summer of 2008. The AIM was first compared with the honeycomb denuder filter-pack system which was considered to have minimal sampling artifacts. After some modifications made to it, the AIM showed good performance for both sulfate and nitrate measurement at the two sites and was then used to evaluate other instruments. For the un-denuded RAAS, the extent of sampling artifacts for nitrate on quartz filters was negligible, while that on Teflon filters was also minimal at high nitrate concentrations (>10 μgm^?3); however, loss through evaporation was significant (～75%) at low nitrate concentrations under hot summer conditions. The MOUDI using aluminum substrates suffered a significant loss of nitrate (50–70%) under summer conditions due to evaporation. Considering that the aluminum substrates are still being widely used to obtain size-resolved aerosol compositions because of their low cost and accurate mass weighed, caution should be taken about the potential significant under determination of semi-volatile components such as ammonium nitrate.     

Behavior of Two Phenyl Urea Herbicides in Clayey Soils and Effect of Alternating Dry-Wet Conditions on their Availability

Adsorption and mobility of linuron (3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea) and diuron (3-(3,4-dichlorophenyl)-1, 1-dimethylurea) were studied in clayey soils from the Gharb area (Morocco). Soils A and B were planted with sun flower (Helianthus annuus) while soil C was planted with sugar cane (Saccharum offcinarum). Adsorption was studied for linuron in soils A and B, while mobility was studied only in soil B. Adsorption data were found to fit the Freundlich equation with correlation coefficients r² > 0.9. Freundlich coefficients (K_f, n_f) were in agreement with L and S isotherm types for soils A and B, respectively. Values of K_oc (195 and 102) indicate moderate adsorption. Desorption isotherms for linuron showed hysteresis for both soils. The pesticide would be more bound to soil A (H = 8.44) than to soil B (H = 4.01). The effect of alternating wet and dry conditions was tested for soils A and B. Results showed that retention would increase in soil subject to an additional wet and dry cycle. In the case of diuron isotherm was of type L in soil C. Desorption was noticeable at high concentrations and tended to decrease when concentrations diminished. Mobility of linuron was tested in polyvinyle chloride (PVC) columns, which received different treatments before their percolation. The pesticide was more mobile in a previously saturated column. In columns subject to a drying step after saturation with water, linuron mobility was greatly reduced.     

global warming — uncertainties,effects, and policy options

Environmental policy making is a challenging task. Often the scope of an issue is not fully comprehended, and its future impact is even less well understood. Global warming is one of these environmental issues. The issue is made more complex because, first, there is a question of whether it is a problem at all and, second, unilateral policy making by one nation may not be sufficient or even significant to tackle the problem globally. This article outlines the scientific factors that contribute to global warming and discusses the uncertainties involved. The authors then discuss the ramifications of taking action (policy making) and failing to act (doing nothing) against the background of global warming, greenhouse gases, and cost-benefit analysis. The article concludes by reporting the results of a multidisciplinary panel of experts composed of scientists, economists, and policy analysts who commented on various policy options.     

Impacts of prescribed fires and benefits from their reduction for air quality,health, and visibility in the Pacific Northwest of the United States

Using a WRF-SMOKE-CMAQ modeling framework, we investigate the impacts of smoke from prescribed fires on model performance, regional and loc al air quality, health impacts, and visibility in protected natural environments using three different prescribed fire emission scenarios: 100% fire, no fire, and 30% fire. The 30% fire case reflects a 70% reduction in fire activities due to harvesting of logging residues for use as a feedstock for a potential aviation biofuel supply chain. Overall model performance improves for several performance metrics when fire emissions are included, especially for organic carbon, irrespective of the model goals and criteria used. This effect on model performance is more pronounced for the rural and remote IMPROVE sites for organic carbon and total PM_2.5. A reduction in prescribed fire emissions (30% fire case) results in significant improvement in air quality in areas in western Oregon, northern Idaho, and western Montana, where most prescribed fires occur. Prescribed burning contributes to visibility impairment, and a relatively large portion of protected class I areas will benefit from a reduced emission scenario. For the haziest 20% days, prescribed burning is an important source of visibility impairment, and approximately 50% of IMPROVE sites in the model domain show a significant improvement in visibility for the reduced fire case. Using BenMAP, a health impact assessment tool, we show that several hundred additional deaths, several thousand upper and lower respiratory symptom cases, several hundred bronchitis cases, and more than 35,000 workday losses can be attributed to prescribed fires, and these health impacts decrease by 25–30% when a 30% fire emission scenario is considered.

Implications: This study assesses the potential regional and local air quality, public health, and visibility impacts from prescribed burning activities, as well as benefits that can be achieved by a potential reduction in emissions for a scenario where biomass is harvested for conversion to biofuel. As prescribed burning activities become more frequent, they can be more detrimental for air quality and health. Forest residue-based biofuel industry can be source of cleaner fuel with co-benefits of improved air quality, reduction in health impacts, and improved visibility.     

A review of electrokinetically enhanced bioremediation technologies for PHs

Since the early 1980’s there have been several different strategies designed and applied to the remediation of subsurface environment including physical, chemical and biological approaches. They have had varying degrees of success in remediating contaminants from subsurface soils and groundwater. The objective of this review is to examine the range of technologies for the remediation of contaminants, particularly petroleum hydrocarbons, in subsurfaces with a specific focus on bioremediation and electrokinetic remediation. Further, this review examines the efficiency of remediation carried out by combining bioremediation and electrokinetic remediation. Surfactants, which are slowly becoming the selected chemicals for mobilizing contaminants, are also considered in this review. The current knowledge gaps of these technologies and techniques identified which could lead to development of more efficient ways of utilizing these technologies or development of a completely new technology.     

Principles and application of an in vivo swine assay for the determination of arsenic bioavailability in contaminated matrices

The assessment of arsenic (As) bioavailability from contaminated matrices is a crucial parameter for reducing the uncertainty when estimating exposure for human health risk assessment. In vivo assessment of As utilising swine is considered an appropriate model for human health risk assessment applications as swine are remarkably similar to humans in terms of physiology and As metabolism. While limited in vivo As bioavailability data is available in the literature, few details have been provided regarding technical considerations for performing in vivo assays. This paper describes, with examples, surgical, experimental design and analytical issues associated with performing chronic and acute in vivo swine assays to determine As bioavailability in contaminated soil and food.     

California's Low‐Threat LUFT Site Closure Policy: Looking Forward

California's regulatory agencies have historically been at the forefront of national efforts to address environmental concerns. In 2012, California's agency for addressing leaking underground fuel tanks (LUFTs) adopted a policy that identifies low‐threat conditions warranting closure of an LUFT case. That development clearly fulfills the role of risk management in the risk assessment–risk management paradigm inherent in environmental remediation. It also encourages identification of additional categories of sites and other circumstances that are “low threat” to develop similar guidance on closure to apply to those sites. ©2015 Wiley Periodicals, Inc.