Impact of biogenic emission uncertainties on the simulated response of ozone and fine particulate matter to anthropogenic emission reductions

The role of emissions of volatile organic compounds and nitric oxide from biogenic sources is becoming increasingly important in regulatory air quality modeling as levels of anthropogenic emissions continue to decrease and stricter health-based air quality standards are being adopted. However, considerable uncertainties still exist in the current estimation methodologies for biogenic emissions. The impact of these uncertainties on ozone and fine particulate matter (PM2.5) levels for the eastern United States was studied, focusing on biogenic emissions estimates from two commonly used biogenic emission models, the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and the Biogenic Emissions Inventory System (BEIS). Photochemical grid modeling simulations were performed for two scenarios: one reflecting present day conditions and the other reflecting a hypothetical future year with reductions in emissions of anthropogenic oxides of nitrogen (NOx). For ozone, the use of MEGAN emissions resulted in a higher ozone response to hypothetical anthropogenic NOx emission reductions compared with BEIS. Applying the current U.S. Environmental Protection Agency guidance on regulatory air quality modeling in conjunction with typical maximum ozone concentrations, the differences in estimated future year ozone design values (DVF) stemming from differences in biogenic emissions estimates were on the order of 4 parts per billion (ppb), corresponding to approximately 5% of the daily maximum 8-hr ozone National Ambient Air Quality Standard (NAAQS) of 75 ppb. For PM2.5, the differences were 0.1-0.25 microg/m3 in the summer total organic mass component of DVFs, corresponding to approximately 1-2% of the value of the annual PM2.5 NAAQS of 15 microg/m3. Spatial variations in the ozone and PM2.5 differences also reveal that the impacts of different biogenic emission estimates on ozone and PM2.5 levels are dependent on ambient levels of anthropogenic emissions.     

Effects assessment: boron compounds in the aquatic environment

In previous studies, boron compounds were considered to be of comparatively low toxicity in the aquatic environment, with predicted no effect concentration (PNEC) values ranging around 1 mg B/L (expressed as boron equivalent). In the present study, we describe an evaluation of toxicity data for boron available for the aquatic environment by different methods.For substances with rich datasets, it is often possible to perform a species sensitivity distribution (SSD). The typical outcome of an SSD is the Hazardous Concentration 5% (HC₅), the concentration at which 95% of all species are protected with a probability of 95%. The data set currently available on the toxic effects of boron compounds to aquatic organisms is comprehensive, but a careful evaluation of these data revealed that chronic data for aquatic insects and plants are missing. In the present study both the standard assessment factor approach as well as the SSD approach were applied. The standard approach led to a PNEC of 0.18 mg B/L (equivalent to 1.03 mg boric acid/L), while the SSD approach resulted in a PNEC of 0.34 mg B/L (equivalent to 1.94 mg boric acid/L). These evaluations indicate that boron compounds could be hazardous to aquatic organisms at concentrations close to the natural environmental background in some European regions. This suggests a possible high sensitivity of some ecosystems for anthropogenic input of boron compounds. Another concern is that the anthropogenic input of boron could lead to toxic effects in organisms adapted to low boron concentration.     

Flame retardants and legacy contaminants in polar bears from Alaska, Canada, East Greenland and Svalbard, 2005-2008

Flame retardants and legacy contaminants were analyzed in adipose tissue from 11 circumpolar polar bear (Ursus maritimus) subpopulations in 2005-2008 spanning Alaska east to Svalbard. Although 37 polybrominated diphenyl ethers (PBDEs), total-(α)-hexabromocyclododecane (HBCD), 2 polybrominated biphenyls (PBBs), pentabromotoluene, pentabromoethylbenzene, hexabromobenzene, 1,2-bis(2,4,6-tribromophenoxy(ethane) and decabromodiphenyl ethane were screened, only 4 PBDEs, total-(α-)HBCD and BB153 were consistently found. Geometric mean ΣPBDE (4.6-78.4 ng/g lipid weight (lw)) and BB153 (2.5-81.1 ng/g lw) levels were highest in East Greenland (43.2 and 39.2 ng/g lipid weight (lw), respectively), Svalbard (44.4 and 20.9 ng/g lw) and western (38.6 and 30.1 ng/g lw) and southern Hudson Bay (78.4 and 81.1 ng/g lw). Total-(α)-HBCD levels (<0.3-41.1 ng/g lw) were lower than ΣPBDE levels in all subpopulations except in Svalbard, consistent with greater European HBCD use versus North American pentaBDE product use. ΣPCB levels were high relative to flame retardants as well as other legacy contaminants and increased from west to east (1797-10,537 ng/g lw). ΣCHL levels were highest among legacy organochlorine pesticides and relatively spatially uniform (765-3477 ng/g lw). ΣDDT levels were relatively low and spatially variable (31.5-206 ng/g lw). However, elevated proportions of p,p'-DDT to ΣDDT in Alaska and Beaufort Sea relative to other subpopulations suggested fresh inputs from vector control use in Asia and/or Africa. Comparing earlier circumpolar polar bear studies, ΣPBDE, total-(α)-HBCD, p,p'-DDE and ΣCHL levels consistently declined, whereas levels of other legacy contaminants did not. International regulations have clearly been effective in reducing levels of several legacy contaminants in polar bears relative to historical levels. However, slow or stalling declines of certain historic pollutants like PCBs and a complex mixture of "new" chemicals continue to be of concern to polar bear health and that of their arctic marine ecosystems.     

Energy efficiency of substance and energy recovery of selected waste fractions

In order to reduce the ecological impact of resource exploitation, the EU calls for sustainable options to increase the efficiency and productivity of the utilization of natural resources. This target can only be achieved by considering resource recovery from waste comprehensively. However, waste management measures have to be investigated critically and all aspects of substance-related recycling and energy recovery have to be carefully balanced. This article compares recovery methods for selected waste fractions with regard to their energy efficiency.Whether material recycling or energy recovery is the most energy efficient solution, is a question of particular relevance with regard to the following waste fractions: paper and cardboard, plastics and biowaste and also indirectly metals. For the described material categories material recycling has advantages compared to energy recovery. In accordance with the improved energy efficiency of substance opposed to energy recovery, substance-related recycling causes lower emissions of green house gases.For the fractions paper and cardboard, plastics, biowaste and metals it becomes apparent, that intensification of the separate collection systems in combination with a more intensive use of sorting technologies can increase the extent of material recycling. Collection and sorting systems must be coordinated. The objective of the overall system must be to achieve an optimum of the highest possible recovery rates in combination with a high quality of recyclables.The energy efficiency of substance related recycling of biowaste can be increased by intensifying the use of anaerobic technologies. In order to increase the energy efficiency of the overall system, the energy efficiencies of energy recovery plants must be increased so that the waste unsuitable for substance recycling is recycled or treated with the highest possible energy yield.     

International comparative study of 3R and waste management policy developments

Reduce, reuse, and recycle (3R) policies form the basis of waste management and global warming countermeasures globally, so we conducted a comparative study of 3R and waste management policies in the European Union (EU), USA, Korea, Japan, China, and Vietnam. An international workshop for 3R and waste management policymakers was held in Kyoto, Japan, and a bibliographic survey was also conducted to collect data. 3R policies are clearly given priority in the hierarchy of waste management in every country studied. Thermal recovery, which includes power generation from waste heat and methane gas collected from organic waste, is also a priority; this is consistent with the increased use of countermeasures to reduce greenhouse gas (GHG) emissions. In the EU, waste management is characterized by practical and effective 3R policies through the development of realistic regulations and by the policymakers??desire to simplify management systems. The policy ideal in China, however, is the development of a circular economy that targets reductions in the amount and hazardousness of waste. Limits on the number of final disposal sites, strategies for procuring resources, and GHG emission countermeasures are closely linked with 3R policies, and further development of 3R policies in parallel with such issues is expected.     

Fluorescence Verses Radioactivity Labeling for Lab-Scale Investigation of the Fate of Water-Soluble Polymers in Wastewater Treatment Plants

Water-soluble synthetic polymers are extensively used in cosmetics, detergents and paints. Many end up in wastewater and, later on, in wastewater-treatment plants. In order to gain an insight into their fate in such plants, fluorescence and radioactivity labelings were compared using a lab-scale reactor designed to mimic industrial conditions. Two fermentation media were considered, namely a mixture of E402 and E204 micro-organisms and an activated sludge collected from a water-treatment plant located in the south of France. A sample of low molar mass commercial poly(acrylic acid) (PAA) was labeled by radioactivity with tritium and by coupling the 6-aminofluorescein fluorescent dye. Labeled PAA-containing sludges were allowed to ferment. To monitor the fate of the polymers, aliquots of the fermented mixtures were withdrawn at selected times and centrifuged. Liquid and solid phases were analyzed by scintigraphy or UV spectrometry, depending of the labeling techniques. Both techniques led to similar distributions, c.a. 75% in the supernatant and 25% in the solid phase. Distributions remained constant during the biological tests. There was no degradation of the commercial PAA after aqueous size exclusion chromatography (SEC), in agreement with literature. These features showed that fluorescence-labeling can be used instead of the complex and expensive radiolabeling. The validated fluorescence-based method was then applied to a linear poly(acrylic acid) synthesized by ATRP and labeled with 6-aminofluorescein. There was no significant difference between the commercial and the linear poly(acrylic acid)s. In contrast, a linear PAA with 5% of tert-butyl ester repeating units was predominantly found in the solid phase although adsorption or absorption by micro-organisms could not be demonstrated. The method based on fluorescence labeling should be applicable to other water soluble polymers provided that the dye remains attached to the polymer as it was the case for the studied poly(acrylic acid)s.     

Multi-decadal changes in tundra environments and ecosystems: synthesis of the International Polar Year-Back to the Future project (IPY-BTF)

Understanding the responses of tundra systems to global change has global implications. Most tundra regions lack sustained environmental monitoring and one of the only ways to document multi-decadal change is to resample historic research sites. The International Polar Year (IPY) provided a unique opportunity for such research through the Back to the Future (BTF) project (IPY project #512). This article synthesizes the results from 13 papers within this Ambio Special Issue. Abiotic changes include glacial recession in the Altai Mountains, Russia; increased snow depth and hardness, permafrost warming, and increased growing season length in sub-arctic Sweden; drying of ponds in Greenland; increased nutrient availability in Alaskan tundra ponds, and warming at most locations studied. Biotic changes ranged from relatively minor plant community change at two sites in Greenland to moderate change in the Yukon, and to dramatic increases in shrub and tree density on Herschel Island, and in subarctic Sweden. The population of geese tripled at one site in northeast Greenland where biomass in non-grazed plots doubled. A model parameterized using results from a BTF study forecasts substantial declines in all snowbeds and increases in shrub tundra on Niwot Ridge, Colorado over the next century. In general, results support and provide improved capacities for validating experimental manipulation, remote sensing, and modeling studies.     

Physico-chemical characteristics of well waters in four urban centers in Southern Nigeria

An ensemble of thirty physico-chemical characteristics was used to assess the quality of well waters in four urban centers in southern Nigeria: Lagos, Benin City, Warri, and Ekpoma. The characteristics investigated include pH; color; turbidity; salinity; electrical conductivity, EC; total dissolved solids, TDS; total suspended solids, TSS; dissolved oxygen, DO; total hydrocarbon, THC; biochemical oxygen demand, BOD; chemical oxygen demand, COD; and nitrate, nitrite, ammonia, sulfate, and phosphate concentrations. Also monitored were the concentrations of sodium, calcium, potassium, magnesium, chloride, bicarbonate, iron, lead, copper, manganese, zinc, chromium, nickel, and cadmium. The results obtained were compared with World Health Organization, WHO, and Nigerian Federal Ministry of Environment, FME, drinking water standards. The results show that with the well water obtained from Lagos, turbidity, 11.80 NTU; pH, 5.68; EC, 1065.55 μS/cm; TDS, 539.00 mg/L; concentrations of iron, 1.83 mg/L; manganese, 0.14 mg/L; and lead, 1.35 mg/L did not meet the WHO standards. In Warri, pH, 5.19; concentrations of lead, 1.35 mg/L; and chromium, 0.10 mg/L in the well water were above the WHO desirable limits. The results also indicated that the well water from Benin City contained concentrations of chromium, 0.18 mg/L; and lead, 0.20 mg/L that exceeded the recommended WHO limits. In Ekpoma, the pH, 6.00; concentrations of chromium, 0.15 mg/L; and lead, 0.44 mg/L were higher than the desirable limits of WHO. Generally, the assessments revealed that the waters were good and fit for drinking and other domestic application without serious threat to public health.     

Degrader density determines spatial variability of 2,6-dichlorobenzamide mineralisation in soil

The metabolite 2,6-dichlorobenzamide (BAM) is a frequent groundwater pollutant produced during degradation of the herbicide 2,6-dichlorobenzonitrile (dichlobenile). Spatial variability of BAM mineralisation is uncharacterized in surface soil, however, and factors controlling the heterogeneity remain unknown. We addressed these issues by sample-to-sample comparisons of BAM mineralisation rates and a range of soil characteristics at spatial scales ranging from meters to centimetres. For mineralisation assays nano-molar concentrations of labelled BAM were added to determine mineralisation rates under realistic conditions. We found a significant variability of BAM mineralisation which increased with decreasing spatial scale. BAM mineralisation rates were correlated to the density of BAM-degrading bacteria but not to water content, TOC, NH₄⁺, NO₃⁻, or pH. The genus Aminobacter, which contains the only BAM degraders known, was detected in MPN samples of BAM degraders by a specific PCR assay targeting the 16S rRNA gene, confirming a role of Aminobacter in BAM mineralisation.     

Pb isotopes as tracers of mining-related Pb in lichens, seaweed and mussels near a former Pb-Zn mine in West Greenland

Identification of mining-related contaminants is important in order to assess the spreading of contaminants from mining as well as for site remediation purposes. This study focuses on lead (Pb) contamination in biota near the abandoned ‘Black Angel Mine’ in West Greenland in the period 1988-2008. Stable Pb isotope ratios and total Pb concentrations were determined in lichens, seaweed and mussels as well as in marine sediments. The results show that natural background Pb (²⁰⁷Pb/²⁰⁶Pb: 0.704-0.767) and Pb originating from the mine ore (²⁰⁷Pb/²⁰⁶Pb: 0.955) have distinct isotopic fingerprints. Total Pb in lichens, seaweed, and mussels was measured at values up to 633, 19 and 1536 mg kg⁻¹ dry weight, respectively, and is shown to be a mixture of natural Pb and ore-Pb. This enables quantification of mining-related Pb and shows that application of Pb isotope data is a valuable tool for monitoring mining pollution.