Low emission zones reduce PM10 mass concentrations and diesel soot in German cities

In many European cities mass concentrations of PM₁₀ (particles less than 10 μm in size) are still exceeding air quality standards as set by the European Commission in 1999. As a consequence, many cities introduced low emission zones (LEZs) to improve air quality and to meet the limit values. In Germany currently 48 LEZs are in operation. By means of dispersion modeling, PM₁₀ concentrations were estimated to decrease up to 10%. Analysis of PM₁₀ levels conducted for Cologne, Berlin, and Munich some time after the LEZs were introduced showed reduction of PM₁₀ mass concentration in the estimated range. The PM₁₀ particle fraction is, however, composed of particles with varying toxicity, of which diesel soot is highly health relevant. An evaluation of air quality data conducted in Berlin showed that in 2010 traffic-related soot concentrations measured along major roads decreased by 52% compared to 2007. Diesel particle emissions in Berlin were reduced in 2012 by 63% compared to a business-as-usual scenario (reference year 2007). A strong reduction of the traffic-related particle fraction of PM_2.5 was also reported for Munich. Therefore, it is likely that the effects of LEZs are considerably more significant to human health than was anticipated when only considering the reduction of PM₁₀ mass concentrations.

Implications: The implementation of low emission zones in German cities might result in a reduction of PM₁₀ levels concentrations by up to 10%. However, it is difficult to show a reduction of PM₁₀ annual averages in this order of magnitude as meteorology has a large impact on the year-to-year variation of PM mass concentrations. Monitoring of other PM metrics such as black smoke (BS) or elemental carbon (EC) might be a better strategy for evaluating LEZs effects. The benefit of low emission zones on human health is far greater than is presently visible from routine measurements of PM₁₀.     

Evaluation of the vulnerability to contamination of drinking water systems for rural regions in Québec,Canada

The aim of this paper is to describe a method for evaluating the vulnerability of drinking water systems to contamination, in particular in rural regions used intensively for agriculture. To do so, various indicators were developed to represent the source to tap multi-barrier approach for drinking water safety. These indicators correspond to four barriers: source susceptibility to contamination; water treatment efficiency; distribution system management; and, overall management of water quality. The indicators were classified, regrouped and weighted within a model based on a multi-criteria analysis. The method was developed and applied to 39 municipal water systems of rural Quebec, Canada. The model obtained can be used for planning purposes to prioritise water systems requiring improvements.     

The pH-dependent adsorption of tributyltin to charcoals and soot

Widespread use of tributyltin (TBT) poses a serious environmental problem. Adsorption by black carbon (BC) may strongly affect its behavior. The adsorption of TBT to well characterized soot and two charcoals with specific surface area in the range of 62-111 m² g⁻¹ have been investigated with main focus on pH effects. The charcoals but not soot possess acidic functional groups. TBT adsorption reaches maximum at pH 6-7 for charcoals, and at pH > 6 for soot. Soot has between 1.5 and 15 times higher adsorption density (0.09-1.77 μmol m⁻²) than charcoals, but charcoals show up to 17 times higher sorption affinities than soot. TBT adsorption is successfully described by a new pH-dependent dual Langmuir model considering electrostatic and hydrophobic adsorption, and pH effects on TBT speciation and BC surface charge. It is inferred that strong sorption of the TBTOH species to BC may affect TBT toxicity.     

2,6-Dichlorobenzamide (BAM) herbicide mineralisation by Aminobacter sp. MSH1 during starvation depends on a subpopulation of intact cells maintaining vital membrane functions

Mineralisation capability was studied in the 2,6-dichlorobenzamide (BAM)-degrading Aminobacter sp. MSH1 under growth-arrested conditions. Cells were starved in mineral salts (MS) solution or groundwater before ¹⁴C-labelled BAM (0.1 mM) was added. Cell physiology was monitored with a panel of vitality stains combined with flow cytometry to differentiate intact, depolarised and dead cells. Cells starved for up to 3 weeks in MS solution showed immediate growth-linked mineralisation after BAM amendment while a lag-phase was seen after 8 weeks of starvation. In contrast, cells amended with BAM in natural groundwater showed BAM mineralisation but no growth. The cell-specific mineralisation rate was always comparable (10⁻¹⁶ mol C intact cell⁻¹ day⁻¹) independent of media, growth, or starvation period after BAM amendment; lower rates were only observed as BAM concentration decreased. MSH1 seems useful for bioremediation and should be optimised to maintain an intact cell subpopulation as this seems to be the key parameter for successful mineralisation.     

Studies of corrosion tendency of drinking water in the distribution system at the University of Benin

Ensemble of corrosion indices was combined to study the corrosion tendency of the drinking water supply at the University of Benin, Nigeria. The experimental results were analysed in terms of three corrosion indices-Langelier Index, Ryznar Index and Larson–Skold Index. According to the evaluation, the Langelier Index ranged from −5.569 to −3.684, Ryznar Index was between 13.340 and 16.418 while the Larson–Skold Index was between 1.191 and 31.750. Results indicated that the water may be corrosive. A regression of these indices on iron concentration (ppm) showed that Langelier Index, Ryznar Index and Larson–Skold Index have R ² of 0.5868, 0.6577 and 0.7063, respectively. The positive correlation between iron levels and the corrosion indices suggested that iron levels were directly related to increase in corrosion tendency.     

Hyperaccumulation of Pb, Zn and Cd in herbaceous grown on lead-zinc mining area in Yunnan, China

A field survey of herbaceous growing on lead-zinc mining area in Yunnan, China were conducted to identify species accumulating exceptionally large concentrations of Pb, Zn and Cd in shoots. In total, 220 plant samples of 129 species of 50 families and 220 soil samples in which the plants were growing were collected. According to accumulation concentration in plant shoots and the concentration time levels compared to plants from non-polluted environments, 21 plant samples of 16 species were chosen as best-performing specimens, 11 plant samples of 10 species for Pb, 5 plant samples of 4 species for Zn and 5 plant samples of 5 species for Cd. Sonchus asper (L.) Hill in Qilinkeng had hyperaccumulation capacity to Pb and Zn. Corydalis pterygopetala Franch in Paomaping had hyperaccumulation capacity to Zn and Cd. All 5 Cd hyperaccumulators came from Lanping lead-zinc mining area. Out of 11 Pb hyperaccumulators, 7 came from Minbingying of Huice lead-zinc mining area. The average of the concentration time levels compared to plants from non-polluted environments were higher than 10 times in all plant samples, the concentration time levels changed from 203 times to 620 times for Pb, from 50 times to 70 times for Zn and from 145 times to 330 times for Cd. Out of 21 plant samples, translocation factor changed from 0.35 to 1.90, only translocation factor of 7 plant samples were higher than 1. Enrichment coefficients of all samples were lower than 1. These plant species were primarily heavy metal hyperaccumulator, and will be used in phytoremediation of the metallic pollutants in soils after further research in accumulation mechanism.     

Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments--a review

The spread of contaminants in soil can be hindered by the soil stabilization technique. Contaminant immobilizing amendments decrease trace element leaching and their bioavailability by inducing various sorption processes: adsorption to mineral surfaces, formation of stable complexes with organic ligands, surface precipitation and ion exchange. Precipitation as salts and co-precipitation can also contribute to reducing contaminant mobility. The technique can be used in in situ and ex situ applications to reclaim and re-vegetate industrially devastated areas and mine-spoils, improve soil quality and reduce contaminant mobility by stabilizing agents and a beneficial use of industrial by-products. This study is an overview of data published during the last five years on the immobilization of one metalloid, As, and four heavy metals, Cr, Cu, Pb and Zn, in soils. The most extensively studied amendments for As immobilization are Fe containing materials. The immobilization of As occurs through adsorption on Fe oxides by replacing the surface hydroxyl groups with the As ions, as well as by the formation of amorphous Fe(III) arsenates and/or insoluble secondary oxidation minerals. Cr stabilization mainly deals with Cr reduction from its toxic and mobile hexavalent form Cr(VI) to stable in natural environments Cr(III). The reduction is accelerated in soil by the presence of organic matter and divalent iron. Clays, carbonates, phosphates and Fe oxides were the common amendments tested for Cu immobilization. The suggested mechanisms of Cu retention were precipitation of Cu carbonates and oxy-hydroxides, ion exchange and formation of ternary cation-anion complexes on the surface of Fe and Al oxy-hydroxides. Most of the studies on Pb stabilization were performed using various phosphorus-containing amendments, which reduce the Pb mobility by ionic exchange and precipitation of pyromorphite-type minerals. Zn can be successfully immobilized in soil by phosphorus amendments and clays.     

A synthesis of progress and uncertainties in attributing the sources of mercury in deposition

A panel of international experts was convened in Madison, Wisconsin, in 2005, as part of the 8th International Conference on Mercury as a Global Pollutant. Our charge was to address the state of science pertinent to source attribution, specifically our key question was: "For a given location, can we ascertain with confidence the relative contributions of local, regional, and global sources, and of natural versus anthropogenic emissions to mercury deposition?" The panel synthesized new research pertinent to this question published over the past decade, with emphasis on four major research topics: long-term anthropogenic change, current emission and deposition trends, chemical transformations and cycling, and modeling and uncertainty. Within each topic, the panel drew a series of conclusions, which are presented in this paper. These conclusions led us to concur that the answer to our question is a "qualified yes," with the qualification being dependent upon the level of uncertainty one is willing to accept. We agreed that the uncertainty is strongly dependent upon scale and that our question as stated is answerable with greater confidence both very near and very far from major point sources, assuming that the "global pool" is a recognizable "source." Many regions of interest from an ecosystem-exposure standpoint lie in between, where source attribution carries the greatest degree of uncertainty.     

Preliminary screening of perfluorooctane sulfonate (PFOS) and other fluorochemicals in fish, birds and marine mammals from Greenland and the Faroe Islands

Extensive screening analyses of perfluorooctane sulfonate (PFOS) and related perfluorinated compounds in biota samples from all over the world have identified PFOS as a global pollutant and have shown its bioaccumulation into higher trophic levels in the food chain. Perfluorinated compounds have been found in remote areas as the Arctic. In this study a preliminary screening of PFOS and related compounds has been performed in liver samples of fish, birds and marine mammals from Greenland and the Faroe Islands. PFOS was the predominant fluorochemical in the biota analyzed, followed by perfluorooctane sulfonamide (PFOSA). PFOS was found at concentrations above LOQ (10 ng/g wet weight) in 13 out of 16 samples from Greenland and in all samples from the Faroe Islands. The results from Greenland showed a biomagnification of PFOS along the marine food chain (shorthorn sculpin < ringed seal < polar bear). The greatest concentration of PFOS was found in liver of polar bear from east Greenland (mean: 1285 ng/g wet weight, n = 2). The geographical distribution of perfluorinated compounds in Greenland was similar to that of persistent organohalogenated compounds (OHCs), with the highest concentrations in east Greenland, indicating a similar geographical distribution to that of OHCs, with higher concentrations in east Greenland than in west Greenland.