北江表层沉积物中铊污染的生态风险

为了解珠江水系北江流域表层沉积物中铊的含量,并在此基础上评价珠江流域北江铊污染现状及其生态风险,该研究于2006年采集了广东省北江韶关至清远段的沉积物样品,采用混酸消解后,使用ICP-MS测定了沉积物中铊的含量,应用潜在生态危害指数对北江的铊污染和生态危害进行评价.结果表明,珠江水系北江河段沉积物已达到了较高的铊污染水平,对周围环境存在着较高的铊生态风险.北江干流沉积物中的铊质量浓度范围为0.92 ~ 2.32 mg·kg-1,平均值为1.70 mg·kg-1;各支流沉积物中铊质量浓度范围为1.02 ~ 3.22 mg·kg-1.个别采样点,特别是接近韶关冶炼厂排放口附近沉积物中铊的含量达到7.78 mg·kg-1,具有极高的铊生态风险.对于北江各支流,铊的污染程度与潜在生态风险程度由高到低的排序为马坝河>武江>浈江>滨江>龙塘河,其中马坝河沉积物铊存在高度的生态风险.     

Resource limitation of bacterial production distorts the temperature dependence of oceanic carbon cycling

Our view of the effects of temperature on bacterial carbon fluxes in the ocean has been confounded by the interplay of resource availability. Using an extensive compilation of cell-specific bacterial respiration (BRi) and production (BPi), we show that both physiological rates respond to changing temperature in a similar manner and follow the predictions of the metabolic theory of ecology. Their apparently different temperature dependence under warm, oligotrophic conditions is due to strong resource limitation of BP, but not of BRi. Thus, and despite previous preconception, bacterial growth efficiency (BGE = BPi/[BPi + BRi]) is not directly regulated by temperature, but by the availability of substrates for growth. We develop simple equations that can be used for the estimation of bacterial community metabolism from temperature, chlorophyll concentration, and bacterial abundance. Since bacteria are the greatest living planktonic biomass, our results challenge current understanding of how warming and shifts in ecosystem trophic state will modify oceanic carbon cycle feedbacks to climate change.     

电气浮含油污水处理工艺工业性试验研究

电解气浮含油污水处理工艺是一种新型的污水处理技术。基于室内试验及现场小试的研究成果,对该技术进行了放大的工业性试验研究,设计了试验流程及装置,取得了阶段性的试验结果。研究结果表明,经电气浮处理后除油率最高可达89%,悬浮固体去除率最高为73%,最低为30%;杀菌率达到99.6%~100%,达到了电气浮除油的要求。电气浮含油污水处理工艺与其他含油污水处理工艺相比,药剂投加量为常规工艺的1/3,运行电耗为0.2 kW.h/m3,总的运行费用约为常规工艺的40%~60%。研究成果为电气浮工艺在石油化工废水处理中的广泛应用奠定了基础。     

模糊综合评价在天然水体水质评价中的应用研究

采用模糊数学方法,对河网地区面源污染影响较大的代表性河流的水质状况进行综合评价研究。根据监测断面水质污染特点,确定了8个指标作为评价因子,建立了评价因素矩阵,计算出影响因子的权重。在此基础上,提出了模糊综合评价的水质级别,证明该河网地区的污染物主要是氮、磷和有机物。     

光纤ZnO薄膜的制备及光催化性能研究

实验利用射频磁控溅射镀膜工艺,分别在光纤和石英玻璃上成功制备了ZnO薄膜。采用X射线衍射仪、原子力显微镜和荧光分光光度计对薄膜进行了测试分析,并对其光催化降解苯酚的性能进行了对比测试。结果表明,该薄膜具有良好的C轴取向性,光致发光峰分别位于362nm、421nm和486nm附近,且随着薄膜样品晶粒的减小而出现蓝移,光纤上ZnO薄膜的光催化能力是以石英玻璃为基底的ZnO薄膜的193倍,光催化效果显著。     

Denitrification and phosphorus uptake by DPAOs using nitrite as an electron acceptor by step-feed strategies

Denitrifying phosphorus accumulating organisms (DPAOs) using nitrite as an electron acceptor can reduce more energy. However, nitrite has been reported to have an inhibition on denitrifying phosphorus removal. In this study, the step-feed strategy was proposed to achieve low nitrite concentration, which can avoid or relieve nitrite inhibition. The results showed that denitrification rate, phosphorus uptake rate and the ratio of the phosphorus uptaken to nitrite denitrified (anoxic P/N ratio) increased when the nitrite concentration was 15 mg·L^-1 after step-feeding nitrite. The maximum denitrification rate and phosphorus uptake rate was 12.73 mg NO2-–N·g MLSS-1?h-1 and 18.75 mg PO43-–P·g MLSS-1?h-1, respectively. These rates were higher than that using nitrate (15 mg·L^-1) as an electron acceptor. The maximum anoxic P/N ratio was 1.55 mg PO43--P?mg NO2--N-1. When the nitrite concentration increased from 15 to 20 mg NO2--N?L-1 after addition of nitrite, the anoxic phosphorus uptake was inhibited by 64.85%, and the denitrification by DPAOs was inhibited by 61.25%. Denitrification rate by DPAOs decreased gradually when nitrite (about 20 mg·L^-1) was added in the step-feed SBR. These results indicated that the step-feed strategy can be used to achieve denitrifying phosphorus removal using nitrite as an electron acceptor, and nitrite concentration should be maintained at low level (<15 mg·L^-1 in this study).     

Construction demolition wastes, Waelz slag and MSWI bottom ash: a comparative technical analysis as material for road construction

The objective of the study is to analyze the technical suitability of using secondary materials from three waste flows (construction and demolition waste (CDW), Waelz slag and municipal solid waste incineration (MSWI) bottom ash), under the regulations and standards governing the use of materials for road construction. A detailed technical characterization of the materials was carried out according to Spanish General Technical Specifications for Road Construction (PG3). The results show that Waelz slag can be adequate for using in granular structural layers, while CDW fits better as granular material in roadbeds. Likewise, fresh MSWI bottom ash can be used as roadbed material as long as it does not contain a high concentration of soluble salts. This paper also discusses the adequacy of using certain traditional test methods for natural soils when characterizing secondary materials for use as aggregates in road construction.     

Seasonal evolution of beach waste and litter during the bathing season on the Catalan coast

Beach waste and litter composition and evolution on popular urban (located in the main nucleus of the municipality) and urbanized (located in residential areas outside the main nucleus) beaches of the Costa Brava (Catalan coast) were assessed during the bathing season. Waste and litter production (amount and composition) were affected by urbanization and varied during the summer. Urban beaches had higher densities of waste deposition and lower percentages of organic, domestic and other miscellaneous waste than urbanized beaches. Litter characteristics were also influenced by type of beach, and varied during the season as a consequence of beach use and cleaning practices, but not environmental factors. Urbanized beaches obtained higher scores for aesthetic quality of sand than urban beaches, and small-sized litter tended to accumulate during the season in the beach of Lloret Centre. The most important problems are management of recyclable materials, litter left by users on the sand, and separation of sand from litter. In addition, current efficiency of mechanical cleaning is low, especially in the withdrawal of cigarette butts. These analyses highlight problems that should be addressed in future management of area beaches.     

Extractability of elements in sugar maple xylem along a gradient of soil acidity

Dendrochemistry has been used for the historical dating of pollution. Its reliability is questionable due primarily to the radial mobility of elements in sapwood. In the present study, the extractability of seven elements was characterized to assess their suitability for the monitoring of environmental conditions. Nine mature sugar maple trees (Acer saccharum Marsh.), a wide-ranging species in eastern North America that has suffered decline in past decades, were sampled in three Quebec watersheds along a soil acidity gradient. Five-year groups of annual tree rings were treated by sequential chemical extractions using extractants of varying strength (deionized H2O, 0.05 M HCl, and concentrated HNO(3)) to selectively solubilize the elements into three fractions (water-soluble, acid-soluble, and residual). Monovalent K; divalent Ba, Ca, Cd, Mg, Mn; and trivalent Al cations were found mostly in the water-soluble, acid-soluble, and residual fractions, respectively. Forms more likely to be mobile within the tree (water-soluble and acid-soluble) do not seem to be suitable for temporal monitoring because of potential lateral redistribution in sapwood rings. However, certain elements (Cd, Mn) were responsive to current soil acidity and could be used in spatial variation monitoring. Extractability of Al varied according to soil acidity; at less acidic sites, up to 90% of Al was contained in the residual form, whereas on very acidic soils, as much as 45% was found in the water-soluble and acid-soluble fractions. Sequential extractions can be useful for determining specific forms of metals as key indicators of soil acidification.