Quantification of PAHs and chlorinated compounds by novel solid-phase microextraction based on the arrays of tin oxide nanorods

The results of an innovative study on a new and highly efficient stationary phase based on the SnO₂ nanorods coating on fused silica have been reported in this paper. SnO₂ nanorods have been grown on fused silica fibers using a hydrothermal process. The extraction properties of the fiber were investigated using headspace solid-phase microextraction (HS-SPME) mode coupled with gas chromatography–mass spectrometry detection for 1,4-dichloro-2-nitrobenzene, biphenyl, and acenaphthene. The effect of different variables on extraction efficiency was studied simultaneously using Box–Behnken method as experimental design. The variables of interest in the HS-SPME were salt effect, adsorption temperature, extraction, and desorption time. Under optimal conditions, the calibration curves were linear up to 10²–10⁵ ng?L^?1 (R ²?>?0.998) with detection limits of 10^?3, 10^?1, and 10 ng?L^?1 for acenaphthene, biphenyl, and 1,4-dichloro-2-nitrobenzene, respectively. The relative standard deviations for single fiber and fiber to fiber were less than 9.8 and 12.5 %, respectively. The high stability of the SnO₂ nanostructure coating is proved at relatively high temperatures (up to 300 °C) with a high extraction capacity and long lifespan (more than 100 times). By applying the proposed technique, promising recoveries (93–98 %) were obtained in the analysis of environmental water samples.     

A new catalytic oxidation method for sensitive quantification of bromate in flours and bottled water using AgNPs

In this paper, a simple and sensitive spectrophotometric method for the determination of nanomolar level of bromate, based on the catalytic effect of silver nanoparticles on the oxidation of acid red 14 by potassium bromate, is described. The reaction rate was monitored spectrophotometrically by measuring the decrease in absorbance of acid red 14 at 516 nm. The detection limit of the method was 8 ng/mL, and the linear range was between 15 and 130 ng/mL. The effects of acidity, concentration of reactants and reaction time, and external ions were also discussed. The optimum reaction conditions were fixed, and some kinetic parameters determined. The relative standard deviation for the determination of bromate at the concentration of 50 ng/mL was calculated to be 0.996 % (n?=?10). The method has been successfully applied to the determination of bromate in flours and bottled waters.     

Limitations of habitats as biodiversity surrogates for conservation planning in estuaries

Increasing pressures on global biodiversity and lack of data on the number and abundance of species have motivated conservation planners and researchers to use more readily available information as proxies or surrogates for biodiversity. “Habitat” is one of the most frequently used surrogates but its assumed value in marine conservation planning is not often tested. The present study developed and tested three alternative habitat classification schemes of increasing complexity for a large estuary in south-east Australia and tested their effectiveness in predicting spatial variation in macroinvertebrate biodiversity and selecting estuarine protected areas to represent species. The three habitat classification schemes were: (1) broad-scale habitats (e.g., mangroves and seagrass), (2) subdivision of each broad-scale habitat by a suite of environmental variables that varied significantly throughout the estuary, and (3) subdivision of each broad-scale habitat by the subset of environmental variables that best explained spatial variation in macroinvertebrate biodiversity. Macroinvertebrate assemblages differed significantly among the habitats in each classification scheme. For each classification scheme, habitat richness was significantly correlated with species richness, total density of macroinvertebrates, assemblage dissimilarity, and summed irreplaceability. However, in a reserve selection process designed to represent examples of each habitat, no habitat classification scheme represented species significantly better than a random selection of sites. Habitat classification schemes may represent variation in estuarine biodiversity; however, the results of this study suggest they are inefficient in designing representative networks of estuarine protected areas.     

Optimal water and waste-load allocations in rivers using a fuzzy transformation technique: a case study

In this paper, a new methodology is developed for integrated allocation of water and waste-loads in river basins utilizing a fuzzy transformation method (FTM). The fuzzy transformation method is used to incorporate the existing uncertainties in model inputs. In the proposed methodology, the FTM, as a simulation model, is utilized in an optimization framework for constructing a fuzzy water and waste-loads allocation model. In addition, economic as well as environmental impacts of water allocation to different water users are considered. For equitable water and waste load allocation, all possible coalition of water users are considered and total benefit of each coalition, which is a fuzzy number, is reallocated to water users who are participating in the coalition. The fuzzy cost savings are reallocated using a fuzzy nucleolus cooperative game and the FTM. As a case study, the Dez River system in south-west of Iran is modeled and analyzed using the methodology developed here. The results show the effectiveness of the methodology in optimal water and waste-loads allocations under uncertainty.     

Experimental and Numerical Analysis of CO Concentration Dispersion of Vehicular Exhaust Emissions in Isolated Environment

Numerical and experimental analyses were applied to carbon monoxide (CO) concentration dispersion to monitor air quality in an enclosed residential complex parking area in Tehran. Firstly, the parking area was preliminary assessed through verifying the characteristics of the problem including the geometry and boundary conditions. Then, proportion of vehicular exhaust emissions was estimated and eventually experimental and numerical analyses were performed. In order to perform numerical calculation, a three-dimensional model was created to numerically simulate the enclosed residential complex parking area by FLUENT software that solves flow governing equations with finite volume method. In FLUENT, species model was selected to assess the dispersion of CO in flow domain. In experimental analysis, CO concentration was measured using sampling bags with a volume of 10 l in 4 min at 6 different points. The sample air was drawn into sampling bags by electric pumps. The findings show that the maximum amount of CO concentration is above the permissible standard recommended by the World Health Organization. Pollutant accumulation was significant in confined areas. In the place where openings exist, the level of accumulation was lower than other areas. The findings obtained from numerical simulation are in complete accord with experimental results.     

Comparison of different static methods for assessment of AMD generation potential in mining waste dumps in the Muteh Gold Mines,Iran

Acid mine drainage (AMD) gives rise to several problems in sulfide-bearing mineral deposits whether in an ore body or in the mining wastes and tailings. Hence, several methods and parameters have been proposed to evaluate the acid-producing and acid-neutralizing potential of a material. This research compares common static methods for evaluation of acid-production potential of mining wastes in the Muteh gold mines by using 62 samples taken from six waste dumps around Senjedeh and Chah-Khatoun mines. According to a detailed mineralogical study, the waste materials are composed of mica-schist and quartz veins with a high amount of pyrite and are supposed to be susceptible to acid production, and upon a rainfall, they release acid drainage. All parameters introduced in different methods were calculated and compared in this research in order to predict the acid-generating and neutralization potential, including APP, NNP, MPA, NPR, and NAGpH. Based on the analytical results and calculation of different parameters, all methods are in a general consensus that DWS-02 and DWS-03 waste dumps are acid-forming which is clearly attributed to high content of pyrite in samples. DWS-04 is considered as non-acid forming in all methods except method 8 which is uncertain about its acid-forming potential and method 7 which considers a low potential for it. DWC-01 is acid-forming based on all methods except 8, 9, 10, and 11 which are also uncertain about its potential. The methods used are not reached to a compromise on DWS-01 and DWC-02 waste dumps. It is supposed that method 7 gives the conservationist results in all cases. Method 8 is unable to decide on some cases. It is recommended to use and rely on results provided by methods 1, 2, 3, and 12 for taking decisions for further studies. Therefore, according to the static tests used, the aforementioned criteria in selected methods can be used with much confidence as a rule of thumb estimation.     

Phytoextraction of heavy metals from contaminated soil,water and atmosphere using ornamental plants: mechanisms and efficiency improvement strategies

Environmental Science and Pollution Research - Accumulation of heavy metals (HMs) in soil, water and air is one of the major environmental concerns worldwide, which mainly occurs due to...     

Improving Water Resistance of Soy-Based Adhesive by Vegetable Tannin

In this research tannic acid was used to prepare soy-based adhesives for making plywood and fiber board. The different resin formulations were analyzed by Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and its derivative as a function of temperature (DTG) and Fourier Transform Infra-red (FTIR) spectroscopy. The results showed that the addition of tannic acid to soy-based adhesive decreased soy-based adhesive viscosity and its pH. The DSC analysis showed that the denaturation temperature of soy-based adhesives decrease by adding tannic acid. The TGA and DTG curves showed that the thermal degradation of soy flour starts above 146 °C. The FTIR spectroscopy results also showed that the soy flour amino acids appeared to react well with tannic acid. Furthermore, delamination and shear strength test results showed the good water resistance of plywood bonded with soy-based tannic acid-modified adhesive. The mechanical and physical properties such as MOR, MOE, IB, and water resistance of fiberboard were improved, by adding tannic acid to the soy-based adhesive.     

Composting plant leachate treatment by a pilot-scale,three-stage,horizontal flow constructed wetland in central Iran

Environmental Science and Pollution Research - Handling and treatment of composting leachate is difficult and poses major burdens on composting facilities. The main goal of this study was to...