Optimization of metal bio-acid leaching from mobile phone printed circuit boards using natural organic acids and H2O2

Journal of Material Cycles and Waste Management - With increased popularity and technological innovation, more and more electric and electronic equipment wastes (e-wastes) are being generated....     

The implementation of data reconciliation for evaluating a full-scale petrochemical wastewater treatment plant

Data reconciliation and mass balance analysis were conducted for the first time to improve the data obtained from a petrochemical wastewater treatment plant (WWTP), and the results were applied to evaluate the performance of the plant. Daily average values for 209 days from the inlet and outlet of the plant obtained from WWTP documentation center along with the results of four sampling runs in this work were used for data reconciliation and performance evaluation of the plant. Results showed that standard deviation and relative errors in the balanced data of each measurement decreased, especially for the process wastewater from 24.5 to 8.6 % for flow and 24.5 to 1.5 % for chemical oxygen demand (COD). The errors of measured data were −137 m³/day (−4.41 %) and 281 kg/day (7.92 %) for flow and COD, respectively. According to the balanced data, the removal rates of COD and 5-day biological oxygen demand (BOD₅) through the aeration unit were equal to 37 and 46 %, respectively. In addition, the COD and BOD₅ concentrations were reduced by about 61.9 % (2137 kg/day) and 78.1 % (1976 kg/day), respectively, prior to the biological process. At the same time, the removal rates of benzene, toluene, and styrene were 56, 38, and 69 %, respectively. The results revealed that about 40 % of influent benzene (75.5 kg/day) is emitted to the ambient air at the overhead of the equalization basin. It can be concluded that the volatilization of organic compounds is the basic mechanism for the removal of volatile organic compounds (VOCs) and it corresponds to the main part of total COD removal from the WWTP.

     

Multivariate statistics and entropy theory for irrigation water quality and entropy-weighted index development in a subtropical urban river,Bangladesh

Environmental Science and Pollution Research - Currently, a well-developed combination of irrigation water quality index (IWQIs) and entropy water quality index (EWQIs) for surface water appraisal...     

Rapid photodegradation and detection of zolpidem over β-SnWO4 and α-SnWO4 nanoparticles: optimization and mechanism

Environmental Science and Pollution Research - We reported the tin (II) tungstate nanoparticles as the photocatalyst and sensor modifier that were synthesized via chemical precipitation reaction...     

Sustainable EOQ and EPQ models for a two-echelon multi-product supply chain with return policy

Environment, Development and Sustainability - In this work, a new model is developed to determine optimum sustainable economic order quantity (EOQ) and economic production quantity (EPQ) values for...     

A prototype printer for laser driven micro-transfer printing

This paper demonstrates a new mode of automated micro transfer printing called laser micro transfer printing (LμTP). As a process, micro-transfer printing provides a unique and critical manufacturing route to extracting active microstructures from growth substrates and deterministically assembling them into a variety of functional substrates ranging from polymers to glasses and ceramics and to metallic foils to support applications such as flexible, large-area electronics, concentrating photovoltaics and displays. Laser transfer printing extends micro-transfer printing technology by providing a non-contact approach that is insensitive to the preparation and properties of the receiving substrate. It does so by exploiting the difference in the thermo-mechanical responses of the microstructure and transfer printing stamp materials to drive the release of the microstructure or ‘ink’ from the stamp and its transfer to substrate. This paper describes the process and the physical phenomena that drive it. It focuses on the use of this knowledge to design and test a print head for the process. The print head is used to demonstrate the new printing capabilities that LμTP enables.     

PREDICTING EROSION AND DEPOSITION ON A STRIPMINED AND RECLAIMED AREA1

ABSTRACT A rill-interrill erosion model was applied to a mined and reclaimed area. Soil loss from the interrill areas was estimated by the Universal Soil Loss Equation (USLE). The model considers the fate and ultimate disposition of the sediment from interrill areas along with the fate and destination of soil materials detached by the rill flow. The net sediment loss was predicted by comparing, for a given flow, the amounts of eroded soil to rill transport capacity. When applied to a selected stripmined and reclaimed site the model displayed the location of contributing areas and the amount of erosion and deposition. The predicted areal distribution of erosion and deposition was compared to measured data. Agreement between the predicted and measured values was within 25 percent.     

Laboratory waste minimization by recovery of silver as nano-silver colloidal dispersion from waste silver chloride

The use of cyclic experiments, where the product of one reaction becomes the starting material for the next experiment, was proposed as an effective protocol for waste minimization in an educational lab. A simple, cheap and pollution-free method was developed for recovering silver as nano-silver colloidal dispersion from waste silver chloride in the laboratories of the Faculty of Health, Safety and Environment. Silver nanoparticles of the size 5–18 nm were recovered in the presence of sodium borohydride as a reducing agent and polyvinylpyrrolidone as a stabilizer agent. The nano-silver particles were studied for their formation, structure, stability and size using UV–Vis spectroscopy, transmission electron microscopy and dynamic light scattering techniques. The antibacterial assays of nanoparticles showed satisfactory results for Escherichia coli ATCC25922, Staphylococcus aureus ATCC 29213, and Acinetobacter baumanii (Clinical isolate). A laboratory experiment was designed in which students synthesize yellow colloidal silver solution from chemical waste silver chloride and estimate particle size using visible spectroscopy.     

Rapid spectrophotometric determination of trace amounts of palladium in water samples after dispersive liquid–liquid microextraction

A simple, rapid, and efficient dispersive liquid–liquid microextraction method, followed by UV–Vis spectrophotometry was developed for the preconcentration and determination of Pd ions in water samples. Pd ions react with α-furildioxime (chelating agent) to form a hydrophobic complex. Various parameters were altered to study and optimize their effects on the extraction efficiency, such as pH, ligand concentration, the type and volume of extraction and dispersive solvents, extraction time, and salt concentration. Under optimized conditions, the method exhibited an enrichment factor (C _org/C _aq) of 25 and recovery more than 98 % within a very short extraction time. The linearity of the method ranged from 10 to 200 μg?L^?1. The limit of detection was 1.1 μg?L^?1. The relative standard deviation for the concentration of 100 μg?L^?1 of Pd was 2.3 % (n?=?10). Finally, the developed method was successfully applied to the extraction and determination of Pd in tap, river, mineral, and sea water samples.     

Changes in urinary catecholamines in response to noise exposure in workers at Sarcheshmeh Copper Complex, Kerman, Iran

Noise is one of the most harmful agents in the workplace. In addition to the adverse effects of noise on the auditory system, as a stressor it may cause increased blood pressure, cardiovascular disease, anxiety, and impaired secretion of hormones. The purpose of this study was to evaluate changes in urinary catecholamines in workers exposed to industrial noise. This is an experimental study of the workers at the smelter section of Sarcheshmeh Copper Industries done on two separate days. During the first day, urine samples from 20 workers who did not use any hearing protection device, were collected during an 8-h work shift and on the second day the same was done but they were asked to use earplugs. Also 20 people were selected as a control group from people who were not exposed to noise at work. Urinary catecholamine levels were measured with ELISA kits. The mean urinary epinephrine and norepinephrine levels in the workers (without earplugs) was respectively 8.69 and 35.56 μg/8h on the first day and on the second day (with earplugs) dropped to 6.45 and 30.95 μg/8h. Noise reduction by earplugs led to almost significant reductions in urinary epinephrine (p?=?0.05) and significant reductions in norepinephrine (p?=?0.02). The results showed that with noise reduction the urinary excretion of stress hormones, especially norepinephrine significantly decreases and workers are probably less prone to stress-related disorders.