The effects of daily cover soils on shear strength of municipal solid waste in bioreactor landfills

Bioreactor landfills are operated to enhance refuse decomposition, gas production, and waste stabilization. The major aspect of bioreactor landfill operation is the recirculation of collected leachate back through the refuse mass. Due to the accelerated decomposition and settlement of solid waste, bioreactor landfills are gaining popularity as an alternative to the conventional landfill. The addition or recirculation of leachate to accelerate the waste decomposition changes the geotechnical characteristics of waste mass. The daily cover soils, usually up to 20–30% of total MSW volumes in the landfill, may also influence the decomposition and shear strength behavior of MSW. The objective of this paper is to study the effects of daily covers soils on the shear strength properties of municipal solid waste (MSW) in bioreactor landfills with time and decomposition. Two sets of laboratory-scale bioreactor landfills were simulated in a laboratory, and samples were prepared to represent different phases of decomposition. The state of decomposition was quantified by methane yield, pH, and volatile organic content (VOC). Due to decomposition, the matrix structure of the degradable solid waste component was broken down and contributed to a significant decrease in the reinforcing effect of MSW. However, the daily cover soil, a non-degradable constituent of MSW, remains constant. Therefore, the interaction between daily cover soil particles and MSW particles will affect shear strength behavior. A number of triaxial tests were performed to evaluate the shear strength of MSW. The test results indicated that the shear strength of MSW was affected by the presence of cover soils. The friction angle of MSW with the presence of cover soil is higher than the friction angle of MSW without any cover soils. The friction angle of MSW increased from 27° to 30° due to the presence of cover soils for Phase 1 samples. The increased strength was attributed to the friction nature of sandy soil that was used as daily covers soils. Therefore, the effects of cover soils on the shear strength properties of MSW should be evaluated and taken into consideration during stability analyses and design.     

Scenario of solid waste reuse in Khulna city of Bangladesh

The reuse and recycling of waste materials are now sincerely considered to be an integral part of solid waste management in many parts of the world. In this context, a vast number of options ranging from small scale decentralized to larger scale centralized plants have been adopted. This study aimed at investigating the waste reuse schemes in Khulna city located in the southern part of Bangladesh and ranked third largest city in the country. The shops for reusable material (SRM) were mostly situated around railway, waterway, and truck station markets which provided easy transportation to further locations. For the reuses of waste materials and products, a chain system was found to collect reusable wastes under a total number of 310 identified SRM with 859 persons directly or indirectly involved in the scheme. This was a decentralized waste management system with self sufficient (autonomous) management. According to mass balance, about 38.52 tons d^?1 solid wastes were reused in Khulna city area, accounting for 7.65% of the total generated wastes. This study revealed that apparently a silent, systematic, smooth, and clean reuse chain has been established in Khulna city area under private initiatives, whose sustainability was confirmed over the years in the country without any official or formal funds. However, proper adjustment between the higher and lower chain in the materials flow path, as well as personal hygiene training for the workers, would further improve the achievements of the established reuse scheme.     

An AHP-ELECTRE framework to evaluate barriers to green supply chain management in the leather industry

ABSTRACT

The leather-processing industry (LPI) is constantly polluting the environment in Bangladesh. As a result, stakeholders are continuously pressurizing managers working in LPI to embrace green leather-processing activities. Thus, the green concept is attracting significant attention from managers in the Bangladeshi LPI. However, the industry is struggling with many barriers to implementing green supply chain management (GSCM). There are many studies regarding barriers to GSCM. However, those studies failed to show the possible pathways to implement GSCM. This study addresses the gap by evaluating barriers to GSCM considering effective pathways to GSCM. In this study, the Analytical Hierarchy Process (AHP) is integrated with Elimination Et Choix Traduisant La Realite (ELECTRE-I) method to identify and prioritize the barriers and to rank the possible pathways to implementing GSCM in the leather industry. To accredit the proposed framework, it is implemented on a leather-processing factory in Bangladesh. A sensitivity analysis is performed to inspect the strength of the outcome of this method. The outcome of this study indicates that the high cost of advanced technology is the most important barrier to implement GSCM while green technology and techniques are the most effective pathways to GSCM. The findings of this research will support researchers and practitioners by giving insights on barriers and possible pathways to implementing GSCM.     

What are the implications of sea-level rise for a 1.5, 2 and 3 °C rise in global mean temperatures in the Ganges-Brahmaputra-Meghna and other vulnerable deltas?

Even if climate change mitigation is successful, sea levels will keep rising. With subsidence, relative sea-level rise represents a long-term threat to low-lying deltas. A large part of coastal Bangladesh was analysed using the Delta Dynamic Integrated Emulator Model to determine changes in flood depth, area and population affected given sea-level rise equivalent to global mean temperature rises of 1.5, 2.0 and 3.0 °C with respect to pre-industrial for three ensemble members of a modified A1B scenario. Annual climate variability today (with approximately 1.0 °C of warming) is potentially more important, in terms of coastal impacts, than an additional 0.5 °C warming. In coastal Bangladesh, the average depth of flooding in protected areas is projected to double to between 0.07 and 0.09 m when temperatures are projected at 3.0 °C compared with 1.5 °C. In unprotected areas, the depth of flooding is projected to increase by approximately 50% to 0.21–0.27 m, whilst the average area inundated increases 2.5 times (from 5 to 13% of the region) in the same temperature frame. The greatest area of land flooded is projected in the central and north-east regions. In contrast, lower flood depths, less land area flooded and fewer people are projected in the poldered west of the region. Over multi-centennial timescales, climate change mitigation and controlled sedimentation to maintain relative delta height are key to a delta’s survival. With slow rates of sea-level rise, adaptation remains possible, but further support is required. Monitoring of sea-level rise and subsidence in deltas is recommended, together with improved datasets of elevation.

     

Ecochemical assessment of environmental chemicals: Draft guideline of the test procedure to evaluate metabolism and degradationof chemicals by plant cell cultures

A guideline is drafted describing the screening procedure in detail. The aim for this is to facilitate an adoption of this test by bodies supervising environmental chemicals. Successful introduction of this method into the respective laboratories will cause no problems, as the procedure has been collaboratively established and improved.     

Potential health hazard of drinking water in restaurants and tea stalls

Potable and equitable drinking water (DW) is a fundamental human right and essential for human health. This study is conducted to assess the groundwater and jar water quality of the roadside restaurants and tea stalls used for drinking by the local people around the Gazipur City area in Bangladesh. Water samples from 173 restaurants and tea stalls are collected. The physico-chemical and biological parameters are analyzed according to the guidelines and standards. The results illustrate that the color, EC, and Mn of 41%, 80%, and 62% of the samples, respectively, exceed the WHO and Environmental Conservation Rules (ECR) standards. In addition, E. coli and total coliform exceeding the threshold standards are found in 47% and 64% of the water samples, respectively. The contamination of DW by fecal coliforms is confirmed and supported by prior studies, which indicates that the DW supplied in restaurants and tea stalls are unsafe because of the possible presence of pathogens. These may cause potential health hazards to consumers from various water-borne diseases. Poor sanitation, unhygienic practices, and improper disposal of wastewater are responsible for the microbial contamination of DW. So, the authorities in charge of these places should take the right regulatory steps, such as regular sanitation inspections, DW quality monitoring, hand-washing practices, and better sanitation in these places.     

Arsenic uptake and phytotoxicity of T-aman rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) grown in the As-amended soil of Bangladesh

A pot-culture experiment was conducted in open-field conditions with highly cultivated locally transplanted (T) aman rice (Oryza sativa L.) named BR-22 in arsenic (As)-amended soil (0, 1.0, 5.0, 10.0, 20.0, 30.0, 40.0 and 50.0 mg kg⁻¹ As) of Bangladesh to see the effect of As on the growth, yield and metal uptake of rice. Arsenic was applied to soil in the form of sodium arsenate (Na₂HAsO₄). Arsenic affected the plant height, tiller and panicle numbers, grain and straw yield of T-aman rice significantly (P ≤ 0.05). The grain As uptake of T-aman rice was found to increase with increase of As in soil and a high grain As uptake was observed in the treatments of 30–50 mg kg⁻¹ As-containing soil. These levels exceed the food hygiene concentration limit of 1.0 mg kg⁻¹ As. However, the straw As uptake varied significantly (P ≤ 0.05) from a low concentration of As in soil (5 mg kg⁻¹) and the highest uptake was noticed in 20 mg kg⁻¹ As treatment.     

Solid waste recycling in Rajshahi city of Bangladesh

Efficient recycling of solid wastes is now a global concern for a sustainable and environmentally sound management. In this study, traditional recycling pattern of solid waste was investigated in Rajshahi municipality which is the fourth largest city of Bangladesh. A questionnaire survey had been carried out in various recycle shops during April 2010 to January 2011. There were 140 recycle shops and most of them were located in the vicinity of Stadium market in Rajshahi. About 1906 people were found to be involved in recycling activities of the city. The major fraction of recycled wastes were sent to capital city Dhaka for further manufacture of different new products. Only a small amount of wastes, specially plastics, were processed in local recycle factories to produce small washing pots and bottle caps. Everyday, an estimated 28.13 tons of recycled solid wastes were handled in Rajshahi city area. This recycled portion accounted for 8.25% of the daily total generated wastes (341 ton d^?1), 54.6% of total recyclable wastes (51.49 ton d^?1) and 68.29% of readily recyclable wastes (41.19 ton d^?1). Major recycled materials were found to be iron, glass, plastic, and papers. Only five factories were involved in preliminary processing of recyclable wastes. Collecting and processing secondary materials, manufacturing recycled-content products, and then buying recycled products created a circle or loop that ensured the overall success of recycling and generated a host of financial, environmental, and social returns.     

Simulation of boundary layer trajectory dispersion sensitivity to soil moisture conditions: MM5 and Noah-based investigation

In this study, the sensitivity of trajectory paths to anomalous soil moisture was analyzed during three different synoptic episodes in June 2006. The MM5 and Noah land surface models were used to simulate the response of the planetary boundary layer. The HYSPLIT model was used for trajectory analysis. It was found that the response in horizontal lower-level wind field was larger at regions where vertical wind velocity changes were also large. In addition, the sensitivity to soil moisture changes was significant and localized where convective activity was well developed and synoptic effects did not dominate. A non-local effect was felt over the rest of the domain where convection was not present since the model atmosphere reacted as a whole to compensate for induced changes in vertical velocity. This finding was supported by the fact that domain averaged vertical velocities changes were of the order of 0.2 cm s^?1 or less at about 650 hPa and about 200 times smaller than modeled local vertical velocity changes. The largest change in horizontal wind field near the surface was found for weak synoptic events on June 11–12 and June 22–23 while the stronger synoptic event of June 17–18 showed smaller differences. These changes in wind field conditions impacted the transport and dispersion of pollutants. To quantify the sensitivity of air quality estimates to soil moisture uncertainty, we have used three well known measures of trajectory differences: the absolute horizontal transport deviation (AHTD), the relative horizontal transport deviation (RHTD) and the absolute vertical transport deviation (AVTD) for an ensemble of 98 trajectories departing from a region well within the computational domain. For the June 11–12 event it was found that for wet and dry soil moisture experiments, AHTD, RHTD, and AVGTD can reach values in the range 60–100 km, 10–20% and 500–900 m at 24 h run time, respectively. For the June 17–18 and June 22–23 events these values of trajectory differences were reduced more than half. These differences in behavior between time periods are largely attributed to the combined effects of synoptic forcing and the sensitivity of planetary boundary layer to soil moisture changes during well developed convection. The implication for air quality studies is that the soil moisture anomaly and related uncertainty in planetary boundary layer response needs to be incorporated in order to construct an ensemble of the most probable scenarios in which pollutants are released and transported throughout a given target region.