Design and Characterization of PVA–Methacrylic Acid Based Smart Polymeric System for Controlled Release of Metoprolol

In the present work covalently crosslinked smart polymeric system of hydrogel based on poly vinyl alcohol (PVA) and methacrylic acid (MA) was designed by free radical polymerization with different compositions using glyoxal (40 % water solution) as crosslinker. It was observed that swelling of hydrogel had a pronounced enhancing effect on increasing the concentration of MA due to availability of more ionized carboxylic groups of MA but produced an opposite effect on increasing the concentration of glyoxal owing to less porous structure. As far as PVA is concerned, swelling did not show significant effect on increasing the concentration of PVA. Hydrophilic polymer PVA rich in hydroxyl group pertained to be highly interactive with water. It was examined that the release of metoprolol tartrate decreased with increased concentration of glyoxal, but increased with increase in concentration of MA. PVA/MA hydrogel was characterized by Fourier transform infrared spectroscopy and X-ray diffraction to study the structure and crystallinity of hydrogel respectively. Morphology was studied through scanning electron microscopy. Furthermore differential scanning calorimetry and thermogravimetric analysis were also performed to characterize thermal stability. It may be concluded that the mechanism of drug release was mainly non-Fickian diffusion.     

Agroforestry environment,potentiality and risk in India: a remote sensing and GIS understanding

Environment, Development and Sustainability - The study utilized the tree covers per cent, agroforestry suitability, present and future (2050) climate, agriculture vulnerability (2050), percentage...     

Quantification,characteristics, and distribution of microplastics released from waste burning furnaces and their associated health impacts

Although investigation of microplastics (MPs) present in air environment has been intensively carried out, quantification, characteristics, and distribution of MPs released from the waste burning furnace (WBF) has been missing in literature. The aim of this study was to characterize the presence of MPs released from WBFs and analyze their associated health impacts. The examined locations were at two WBFs (nominated as TPS1 and TPS2) in Sidoarjo, Indonesia. MPs were collected using a 9 cm diameter glass beaker for a period of 8 h at two different sampling points, which are 3 and 15 m from each WBF. Several characteristics of MPs in terms of the number of particles, size, shape, color, and polymer type were comprehensively characterized. This study found that the obtained MPs were of fiber type and in the range of 46–77 and 41–59 particles at TPS1 and TPS2, respectively. In general, the polymer types of MPs were, respectively, cellophane and polytetrafluoroethylene at TPS1 and TPS2. Moreover, it was estimated that about 1.9–2.3 MPs can enter the human body via inhalation. This study offers a pilot examination of MPs released from WBF and findings from this study are crucial to provide new knowledge as a basis to carefully regulate the use of WBF particularly that are located closely to local community.     

Evaluation of Traffic Noise Pollution in Amman, Jordan

The City of Amman, Jordan, has been subjected to persistent increase in road traffic due to overall increase in prosperity, fast development and expansion of economy, travel and tourism. This study investigates traffic noise pollution in Amman. Road traffic noise index L ₁₀(1 h) was measured at 28 locations that cover most of the City of Amman. Noise measurements were carried out at these 28 locations two times a day for a period of one hour during the early morning and early evening rush hours, in the presence and absence of a barrier. The Calculation of Road Traffic Noise (CRTN) prediction model was employed to predict noise levels at the locations chosen for the study. Data required for the model include traffic volume, speed, percentage of heavy vehicles, road surface, gradient, obstructions, distance, noise path, intervening ground, effect of shielding, and angle of view. The results of the investigation showed that the minimum and the maximum noise levels are 46 dB(A) and 81 dB(A) during day-time and 58 dB(A) and 71 dB(A) during night-time. The measured noise level exceeded the 62 dB(A) acceptable limit at most of the locations. The CTRN prediction model was successful in predicting noise levels at most of the locations chosen for this investigation, with more accurate predictions for night-time measurements.     

Development of a simple extraction cell with bi-directional continuous flow coupled on-line to ICP-MS for assessment of elemental associations in solid samples

A continuous-flow system comprising a novel, custom-built extraction module and hyphenated with inductively coupled plasma-mass spectrometric (ICP-MS) detection is proposed for assessing metal mobilities and geochemical associations in soil compartments as based on using the three step BCR (now the Measurements and Testing Programme of the European Commission) sequential extraction scheme. Employing a peristaltic pump as liquid driver, alternate directional flows of the extractants are used to overcome compression of the solid particles within the extraction unit to ensure a steady partitioning flow rate and thus to maintain constant operationally defined extraction conditions. The proposed flow set-up is proven to allow for trouble-free handling of soil samples up to 1 g and flow rates < or =10 mL min(-1). The miniaturized extraction system was coupled to ICP-MS through a flow injection interface in order to discretely introduce appropriate extract volumes to the detector at a given time and with a given dilution factor. The proposed hyphenated method demonstrates excellent performance for on-line monitoring of major and trace elements (Ca, Mn, Fe, Ni, Pb, Zn and Cd) released when applying the various extracting reagents as addressed in the BCR scheme, that is, 0.11 M CH(3)COOH, 0.1 NH(2)OH.HCl and 30% H(2)O(2), even when a well recognized matrix-sensitive detector, such as ICP-MS, is used. As a result of the enhanced temporal resolution of the ongoing extraction, insights into the breaking down of phases and into the kinetics of the metal release are obtained. With the simultaneous multielement detection capability of ICP-MS, the dynamic fractionation system presents itself as an efficient front-end for evaluation of actual elemental association by interelement comparison of metals leached concurrently during the extraction time. Thus, the intimate elemental association between Cd and Zn in contaminated soils could be assessed.     

Update to the light nonaqueous phase liquid infiltration conceptual model

The 1970s oil spill model described the infiltration of oil (light nonaqueous phase liquid or LNAPL) into the subsurface, resulting in an oil pancake depressing the water table within the capillary fringe. An update to the 1970s model is needed because, according to the discussion by Lenhard et al. on the work of Lenhard and Parker and Farr et al., “A key concept of their efforts was that LNAPL-saturated ‘pancakes’ do not exist.” Lenhard and Parker and Farr et al. showed that the distribution of water, LNAPL, and air in the subsurface was a function of the LNAPL, water, and air pressures; fluid properties; and the pore-size distribution of the porous medium, and that the fluid saturations can be calculated from fluid levels in a monitoring well. The 1970s oil spill infiltration model described that spilled LNAPL migrates downward through the vadose zone under the force of gravity with some lateral spreading. The vadose zone, where all of the liquid pressures are less than atmospheric pressure, becomes a three-fluid zone consisting of variable saturations of air, water, and LNAPL, which together fully saturate the pore spaces. One important update to the 1970s model is that instead of the infiltrating LNAPL stopping at and depressing the water table, LNAPL penetrates the water table to a depth consistent with the gravitational and capillary forces experienced during LNAPL infiltration and creates a two-fluid zone below the water table where LNAPL and water pressures are greater than atmospheric pressure. After the LNAPL release stops, LNAPL infiltration and migration will cease after reaching equilibrium. The updated LNAPL infiltration conceptual model, like the 1970s model, describes the situation where the LNAPL release has stopped and LNAPL infiltration and migration have ceased after reaching equilibrium. The volume of LNAPL released is also assumed to be sufficient to pass through the vadose zone and enter the saturated zone.     

Effectiveness of HVAC Duct Cleaning Procedures in Improving Indoor Air Quality

Indoor air quality has become one of the most seriousenvironmental concerns as an average person spends about 22 hrindoors on a daily basis. The study reported in this article, wasconducted to determine the effectiveness of three commercialHVAC (Heating Ventilation Air Conditioning) duct cleaning processes in reducing the level of airborne particulate matterand viable bioaerosols. The three HVAC sanitation processeswere: (1) Contact method (use of conventional vacuum cleaning ofinterior duct surfaces); (2) Air sweep method (use of compressedair to dislodging dirt and debris); (3) Rotary brush method(insertion of a rotary brush into the ductwork to agitate anddislodge the debris). Effectiveness of these sanitationprocesses was evaluated in terms of airborne particulate andviable bioaerosol concentrations in residential homes. Eightidentical homes were selected in the same neighborhood. Twohomes were cleaned using each procedure and two were used ascontrols. It was found that both particle count readings andbioaerosol concentrations were higher when cleaning was beingperformed than before or after cleaning, which suggests thatdirt, debris and other pollutants may become airborne as aresult of disturbances caused by the cleaning processes.Particle count readings at 0.3 micron size were found to haveincreased due to cigarette smoking. Particle counts at 1.0micron size were reduced due to HVAC duct cleaning. Post-levelbioaerosol concentrations, taken two days after cleaning, werefound to be lower than the pre-level concentrations suggestingthat the cleaning procedures were effective to some extent.Homes cleaned with the Air Sweep procedure showed the highestdegree of reduction in bioaerosol concentration among the threeprocedures investigated.     

Evaluating greywater reuse potential for sustainable water resources management in Oman

This study aims to evaluate the potential of greywater availability in Muscat Governorate in the Sultanate of Oman, to establish a methodology for greywater quantity estimation, to test greywater quality in order to assess reuse potential, and to examine public acceptance for reuse.Total fresh water consumption and greywater generation from different household sources were measured by water meters in five selected households during summer and winter. Additionally, a survey was designed and conducted in five administrative areas of Muscat Governorate, with the objective of testing a methodology for estimating greywater generation potential in these areas. Collected data were compared with that used by the Ministry of Housing, Electricity and Water, Sultanate of Oman. The survey covered a total of 169 houses and 1,365 people. Greywater samples were collected and analyzed from showers, laundries, kitchens and sinks in some of these households to determine their water quality parameters. Statistical analysis results indicated that there is no significant variance in the total fresh water consumption between data used by the ministry and those measured and estimated during this study, highlighting the applicability of the tested method. The study concluded that the average per capita greywater generation rate is 151 Lpcd. Greywater production ranged from 80 to 83% of the total fresh water consumption and most of the greywater is generated from showers. Further, 55 to 57% of the greywater generated in a typical Omani household originated from the shower, 28 to 33% originated from the kitchen, 6 to 9% originated from laundry, and 5 to 7% originated from sink, which constitutes approximately 81% of the total fresh water consumption. The physical, chemical, and biological analyses of the grab samples revealed that greywater contains significant levels of suspended solids, inorganic constituents, total organic carbon, chemical and biochemical oxygen demands, total Coliforms and Escherichia Coliform bacteria. The public acceptance survey illustrated that approximately 76% of the respondents accepted the reuse of greywater for gardening, 53% for car washing and 66% for toilet flushing.     

Trend in metals variation in Tasik Chini, Pahang, Peninsular Malaysia

Water from 15 sampling stations in Tasik Chini (Chini Lake), Peninsular Malaysia were sampled for 12 months from September 2004 until August 2005 and analyzed for 11 metals including iron (Fe), aluminum (Al), manganese (Mn), barium (Ba), zinc (Zn), lead (Pb), copper (Cu), cadmium (Cd), nickel (Ni), chromium (Cr) and cobalt (Co). Results showed that the mean (min-max) metal concentrations (in micrograms per liter) in Tasik Chini waters for the 12 months sampling based on 15 sampling stations (in descending order) for Fe, Al, Mn, Ba, Zn, Pb, Cu and Cd were 794.84 (309.33-1609.07), 194.53 (62.37-665.93), 29.16 (16.68-79.85), 22.07 (15.64-29.71), 5.12 (2.224-6.553), 2.36 (1.165-4.240), 0.832 (0.362-1.443) and 0.421 (0.254-0.696) respectively. Concentration for three metals i.e. Ni, Cr and Co were too low and not detected by the graphite furnace Atomic Absorption Spectrophotometry (AAS). Comparison with various water quality standards showed that the mean metals concentration in surface water of Tasik Chini were low and within the range of natural background except for Fe and Al. In general, metal concentrations in Tasik Chini water varied temporally and spatially. The main factors influencing these metal concentrations in the water were the raining season and mining activities. Stations located at Tanjung Jerangking and Melai areas were the most effected due to those factors.     

Multivariate analysis of heavy metals concentrations in river estuary

Multivariate statistical techniques such as multivariate analysis of variance (MANOVA) and discriminant analysis (DA) were applied for analyzing the data obtained from two rivers in the Penang State of Malaysia for the concentration of heavy metal ions (As, Cr, Cd, Zn, Cu, Pb, and Hg) using a flame atomic absorption spectrometry (F-AAS) for Cr, Cd, Zn, Cu, Pb, As and cold vapor atomic absorption spectrometry (CV-AAS) for Hg. The two locations of interest with 20 sampling points of each location were Kuala Juru (Juru River) and Bukit Tambun (Jejawi River). MANOVA showed a strong significant difference between the two rivers in terms of heavy metal concentrations in water samples. DA gave the best result to identify the relative contribution for all parameters in discriminating (distinguishing) the two rivers. It provided an important data reduction as it used four parameters (Zn, Pb, Cd and Cr) affording 100% correct assignations. Results indicated that the two rivers were different in terms of heavy metals concentrations in water, and the major difference was due to the contribution of Zn. A negative correlation was found between discriminate functions (DF) and Cr and As, whereas positive correlation was exhibited with other heavy metals. Therefore, DA allowed a reduction in the dimensionality of the data set, delineating a few indicator parameters responsible for large variations in heavy metal concentrations. Correlation matrix between the parameters exhibited a strong evidence of mutual dependence of these metals.