Evaluation of the california environmental quality act

The California Environmental Quality Act (CEQA) has evolved from a mini-NEPA, first enacted in 1970, into a procedural act that affects the approval process of all large developments in California. In 1990, California local governments produced over 1600 environmental impact reports and 30,000 initial studies under CEQA. Because of its widespread use, CEQA has periodically drawn the attention of the state legislature, most recently in 1993, when over 60 CEQA reform bills were introduced. This paper describes the CEQA process and evaluates its success at meeting its explicit and implicit goals. The research includes a statewide survey of CEQA practice, sent to the planning departments of all 513 local governments in California in 1991. Survey respondents agreed that CEQA helps in evaluating environmental impacts, reducing impacts, informing the public, and coordinating public agency review. It is effective in reducing the environmental impacts of individual projects, but is not as effective in improving environmental quality on an areawide scale. This research concludes that CEQA has led to positive outcomes and is not as deeply flawed as many of its critics claim. Still, CEQA as currently designed may not be the optimal vehicle for ensuring environmental quality.     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Application of a health promotion model to community-based sustainability planning

The future of human health and that of all other species depends on the viability and sustainability of a host of environments and ecosystems. Human behaviours have profound effects (both positive and negative) on such ecosystems. Despite the obviousness of these statements, there remains a lack of clarity around the mechanisms for altering specific behaviours related to sustainability and their impact on environments. This paper offers a conceptual framework for identifying relations between human behaviour and ecosystem health and sustainability. We also discuss strategies for changing target behaviours in the context of a programme or policy planning. Finally, we draw on research that applies this adaptation to a small island community near Vancouver, Canada.     

Nitrogen removal in laboratory model leachfields with organic-rich layers

Septic system leachfields can release dissolved nitrogen in the form of nitrate into ground water, presenting a significant source of pollution. Low cost, passive modifications, which increase N removal in traditional leachfields, could substantially reduce the overall impact on ground water resources. Bench-scale laboratory models were constructed to evaluate the effect of placing an organic layer below the leachfield on total N removal. The organic layer provides a carbon source for denitrification. Column units representing septic leachfields were constructed with sawdust-native soil organic layers placed 0.45 m below the influent line and with thicknesses of 0.0, 0.3, 0.6, and 0.9 m. Using a synthetic septic tank effluent, NO(3)-N concentrations at 3.8 m below the influent line were consistently below 1 mg L(-1) during 10 months of operation compared with a NO(3)-N concentration of nearly 12 mg L(-1) in the control column. The average total N removal increased from 31% without the organic layer to 67% with the organic layer. Total N removal appeared limited by the extent of organic N oxidation and nitrification in the 0.45-m aerobic zone. Design modifications targeted at improving nitrification above the organic layer may further increase total N removal. Increased organic layer thicknesses from 0.3 m to 0.9 m did not significantly improve average total N removal, but caused a shift in residual nitrogen from organic N to ammonia N. Results indicate that addition of a layer of carbon source material at least 0.3 m thick below a standard leachfield substantially improves total N removal.     

丹江口水库浮游细菌和氮磷循环基因垂直分布特征及其驱动因素

丹江口水库作为南水北调中线工程水源地,不同深度浮游细菌群落组成、 氮磷循环功能及其驱动因素尚未清晰. 选取丹江口水库5个生态点位,采用宏基因组学研究表层、 中层和底层垂直分布浮游细菌群落组成,分析预测氮磷循环功能及其驱动因素. 结果表明,丹江口水库主要由变形菌门、 放线菌门和浮霉菌门等优势种群组成,不同深度来源的浮游细菌群落结构具有显著差异,水温（T）、 氧化还原电位（ORP）、 溶解氧（DO）和Chla是影响浮游细菌群落组成的主要因素. 氮循环功能基因分析表明,主要涉及生物固氮过程、 硝化作用、 反硝化作用和异化硝酸盐还原作用等7个主要途径的gltB、 glnA、 gltD、 gdhA和NRT等39个氮循环功能基因. 磷循环功能基因分析表明,主要涉及有机磷矿化、 无机磷溶解、 调节等6个主要途径的pstS、 ppx-gppA、 glpQ和ppk1等54个磷循环功能基因. 聚类分析表明不同深度是影响氮磷循环功能基因组成和丰度的主要因素,表层和底层氮磷循环功能基因丰度高于中层样品. 奇异球菌属、 嗜氢菌属、 Limnohabitans和棍状杆菌属等是氮磷循环的关键物种. DO、 pH、 T、 总溶解性固体（TDS）、 电导率（EC）和Chla与氮磷循环功能基因显著相关,以上环境因子随丹江口水库深度增加浓度降低或升高,导致浮游细菌氮磷循环功能基因呈明显的垂直分布特征. 通过揭示丹江口水库不同深度浮游细菌群落组成、 氮磷循环功能及其影响因素,可为丹江口浮游细菌生态功能和多样性保护发挥潜在的作用.     

The optimal tax for maximum economic yield: Fishery regulation under rational expectations

This paper examines the optimal tax to achieve maximum economic yield (MEY) exploitation in a rational expectations model of a competitive open-access fishery. To analyze the dynamic evolution of resource use a structural model which explains the relationship between the firm and the industry is presented. The unregulated equilibrium is contrasted with the potential MEY. Conditions under which the unregulated equilibrium will be MEY are explored. In addition, a tax is devised which will cause non-MEY competitive exploitation to become MEY when the tax is implemented.     

Spatial sampling and the environment: some issues and directions

In this paper we summarize research issues for spatial environmental sampling stemming from a NISS/USEPA workshop held on 21-22 September 1994 at Chapel Hill, NC.     

Modeling porosity reductions caused by mineral fouling in continuous-wall permeable reactive barriers

A study was conducted to assess key factors to include when modeling porosity reductions caused by mineral fouling in permeable reactive barriers (PRBs) containing granular zero valent iron. The public domain codes MODFLOW and RT3D were used and a geochemical algorithm was developed for RT3D to simulate geochemical reactions occurring in PRBs. Results of simulations conducted with the model show that the largest porosity reductions occur between the entrance and mid-plane of the PRB as a result of precipitation of carbonate minerals and that smaller porosity reductions occur between the mid-plane and exit face due to precipitation of ferrous hydroxide. These findings are consistent with field and laboratory observations, as well as modeling predictions made by others. Parametric studies were conducted to identify the most important variables to include in a model evaluating porosity reduction. These studies showed that three minerals (CaCO3, FeCO3, and Fe(OH)2 (am)) account for more than 99% of the porosity reductions that were predicted. The porosity reduction is sensitive to influent concentrations of HCO3-, Ca2+, CO3(2-), and dissolved oxygen, the anaerobic iron corrosion rate, and the rates of CaCO3 and FeCO3 formation. The predictions also show that porosity reductions in PRBs can be spatially variable and mineral forming ions penetrate deeper into the PRB as a result of flow heterogeneities, which reflects the balance between the rate of mass transport and geochemical reaction rates. Level of aquifer heterogeneity and the contrast in hydraulic conductivity between the aquifer and PRB are the most important hydraulic variables affecting porosity reduction. Spatial continuity of aquifer hydraulic conductivity is less significant.