Effect of temperature and dissolved oxygen on the growth kinetics of Pseudomonas putida F1 growing on benzene and toluene

Batch experiments were conducted to determine the effect of temperature and dissolved oxygen concentration on the rates of growth and substrate (benzene and toluene) degradation by the toluene degrading strain, Pseudomonas putida F1. Over a range of temperature from 15 to 35 degrees C the maximum specific growth rate followed the Topiwala-Sinclair relationship when either benzene or toluene served as the sole carbon and energy source. Oxygen limited growth followed Monod saturation kinetics with the specific growth rate given as a function of the dissolved oxygen concentration. The oxygen half-saturation coefficient was found to be approximately 1 mg/l regardless of whether benzene or toluene was the substrate. Similar experiments with Burkholderia (Ralstonia) pickettii PKO1 for grown on toluene revealed an oxygen half-saturation coefficient of 0.7 mg/l.     

Variability of parameters measured during the resuspension of sediments with a particle entrainment simulator

The release of contaminants from sediments is an important problem facing environmental managers concerned with issues such as maintenance dredging, habitat restoration and dredge spoil placement. While there are laboratory methods to assess the remobilization of contaminants from resuspended sediments, little is known about how their operating characteristics influence a sediments response to resuspension. In this study, a particle entrainment simulator (PES) for resuspending sediments was evaluated by assessing variability among replicates and over operation time (12 h) for three estuarine sediments. These sediments varied in physical and chemical properties as well as the degree of metal contamination. Results showed that under identical resuspension conditions, there was low variability among sediment replicates. Sediment properties and the degree of metal contamination affected the magnitude and variation in water column parameters and contaminant release. Fine-grained sediments affected water column parameters, which stabilized over several hours of resuspension. While metal concentrations in the aqueous and particulate samples varied throughout operation, variation was highest for Cd and Ni. Compared to other methods used to evaluate the effects of sediment resuspension, the PES has operational advantages such as the ability to monitor water column conditions and resuspend sediment at specified energy levels. Overall, the PES provided reproducible conditions of resuspension effects among sediments varying in composition and contamination, demonstrating its value as a tool to evaluate contaminant mobility.     

Real-world vehicle emissions: a summary of the twelfth Coordinating Research Council On-Road Vehicle Emissions Workshop

The Coordinating Research Council (CRC) held its 12th workshop in April 2002, with nearly 90 presentations on the most recent on-road vehicle emissions research. This paper summarizes the presentations from researchers who are engaged in improving understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed mobile source emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles (with an emphasis in this workshop on particle emissions), effects of fuels on emissions, evaluation of in-use emissions control programs, and efforts to improve our capabilities in performing on-board emissions measurements, as well as topics for future research.     

Interphase mass transfer during chemical oxidation of TCE DNAPL in an aqueous system

The chemical oxidation of trichloroethene dense non-aqueous phase liquid by permanganate was studied in an aqueous system using micro-reaction/extraction vessels in a novel approach. Experiments were conducted at ambient temperature ( approximately 20 degrees C) under static and mixed conditions to evaluate the rate of TCE(DNAPL) dissolution as a function of permanganate concentration. Chemical oxidation by permanganate was shown to increase the rate of TCE(DNAPL) dissolution under static conditions and decrease the rate of dissolution under mixed conditions. The apparent inconsistency in results appears to result from the local deposition of a film at the DNAPL interface composed of manganese oxide solids as discovered through visual observation with the aid of a Goniometer. Data from interfacial deposition experiments suggest that the film formed rapidly and reached maturation within approximately 2 h with little or no growth occurring thereafter. A conceptual model of the reaction and mass transfer processes occurring at the DNAPL interface was proposed based on the experimental results.     

Polychlorinated biphenyls in Narragansett Bay surface sediments

Polychlorinated biphenyls (PCBs) were evaluated in 41 surface sediments collected from Narragansett Bay, RI in 1997-1998. Highest concentrations of total PCBs (1760 ng/g) were in rivers at the head of the bay and the values decreased southward toward the mouth of the bay, with elevated concentrations in some of the coves. The PCB levels in approximately 43% of the samples exceeded the effects range median (ERM) guideline [Environ. Manage. 19 (1995) 81] indicating possible adverse biological effects at these stations. Principal component analysis (PCA) of the surface sediment PCBs separated the Taunton River samples from the rest of the samples. This result suggests that this river has a different PCB composition and sources than the other areas investigated. It also showed that this river has a limited influence on other bay stations as the adjacent samples downstream did not have the same chemical signature. Congener ratios derived from the PCA were useful in distinguishing stations that had different sources of PCBs than the bulk of the bay sediments. Although Aroclor 1268 and 1270 accounted for <1% of all PCB production, their major components, CB206 and CB209, account for 3-6% of the CBs in most bay samples. This may reflect more local use of these Aroclor mixtures and/or be indicative of their relative stability, compared to less chlorinated mixtures. Using linear alkyl benzenes (LABs) as a marker for sewage derived PCBs suggested that up to 95% of the PCBs at the most contaminated sites in the Seekonk, Providence, and Taunton Rivers were sewage derived. This analysis also showed that there is a high background level (167 ng/g) of PCBs in the Seekonk and Providence River, while the Taunton River had a relatively low background level (23.7 ng/g). At the furthest stations south in the Providence River, the sewage derived PCBs only accounted for 23% of the total which suggests that PCB associated with sewage particles are rapidly deposited and are therefore not the most significant source of these compounds to the lower reaches of Narragansett Bay.     

Coupling permanganate oxidation with microbial dechlorination of tetrachloroethene.

For sites contaminated with chloroethene non-aqueous-phase liquids, designing a remediation system that couples in situ chemical oxidation (ISCO) with potassium permanganate (KMnO4) and microbial dechlorination may be complicated because of the potentially adverse effects of ISCO on anaerobic bioremediation processes. Therefore, one-dimensional column studies were conducted to understand the effect of permanganate oxidation on tetrachloroethene (PCE) dechlorination by the anaerobic mixed culture KB-1. Following the confirmation of PCE dechlorination, KMnO4 was applied to all columns at a range of concentrations and application velocities to simulate varied distances from oxidant injection. Immediately following oxidation, reductive dechlorination was inhibited; however, after passing several pore volumes of sterile growth medium through the columns after oxidation, a rebound of PCE dechlorination activity was observed in every inoculated column without the need to reinoculate. The volume of medium required for a rebound of dechlorination activity differed from 1.1 to 8.1 pore volumes (at a groundwater velocity of 4 cm/d), depending on the specific condition of oxidant application.     

Response of fluctuating asymmetry to arsenic toxicity: support for the developmental selection hypothesis

The effect of exposure to sodium arsenite during development was tested on adult fluctuating asymmetry (FA) in sternopleural bristle number, bristle number, body size and survivorship in Drosophila melanogaster. Three genetic strains of flies were used, CT-106, PVM and Oregon-R, and arsenite concentrations ranged from relatively mild, sub-lethal doses, to concentrations with pronounced negative effects on survivorship. At arsenite concentrations of 1.0 and 0.125 mM, mortality was on average 38% greater than in controls, and surviving flies emerged significantly smaller and had fewer bristles than controls. Neither the effect of arsenite or the genotype x environment interaction on asymmetry were significant. However, given the high mortality, any increase in FA could have been masked by the outcome of developmental selection against developmentally unstable phenotypes. We tested for this effect by contrasting FA values between (1) flies reared at the highest concentrations used previously, (2) flies reared at sub-lethal dosage, and (3) controls. Positional fluctuating asymmetry (PFA), which is expected to be a sensitive indicator of underlying developmental stability, was significantly reduced among flies reared at the highest concentration, and at which flies suffered significant mortality. Moreover, the slope of the regression relating mean PFA to emergence per bottle was significantly positive. These data support the hypothesis that developmental selection occurred in this experiment, and that the expected positive relationship between asymmetry and stress may be altered when the stressor eliminates individuals from the population. In contrast, FA of flies reared at sub-lethal dosage did not differ from that in controls, a result that fails to support the hypothesis that arsenite disrupts developmental stability. Our results call for caution in FA-based biomonitoring, especially of potentially lethal forms of stress, because in the presence of developmental selection, and under the common assumption that FA should increase under stress, erroneous conclusions may be drawn about the health and well being of a population. It is suggested that FA-based biomonitoring efforts integrate the use of FA with other bioindicators, and experimentally validate any expected FA-stress relationship before attempting to infer the presence of environmental stress.     

Chemical valorization of forest and agricultural by-products. Obtention, chemical characteristics, and mechanical behavior of a novel family of hydrophobic films

Esterification of hemicelluloses of the xylan family was performed in order to produce hydrophobic films. Acylation reactions were carried out with lauroyl chloride in the N,N-dimethylacetamide/lithium chloride homogeneous system using 4-dimethylaminopyridine as activator and were induced by microwave irradiation. In the experimental conditions used, 108 and 172% mass ratios were obtained for the dodecyl-grafted xylan and heteroxylan, respectively. The degrees of substitution (DS) were 1.3 (maximum 2) for xylan and 1.2 (maximum 2.1) for heteroxylan. These products were further characterized by FT-IR spectroscopy. The mechanical and thermomechanical behavior of this new family of hydrophobic films were analyzed and compared to those obtained from cellulose with a similar DS by the means of tensile tests. Our results indicate that the dodecyl-grafted xylan film presents the best rigidity-resistance to traction ratio.