Volatile Organic Compounds: Sampling Methods and Their Worldwide Profile in Ambient Air

The atmosphere is a particularly difficult analytical system because of the very low levels of substances to be analysed, sharp variations in pollutant levels with time and location, differences in wind, temperature and humidity. This makes the selection of an efficient sampling technique for air analysis a key step to reliable results. Generally, methods for volatile organic compounds sampling include collection of the whole air or preconcentration of samples on adsorbents. All the methods vary from each other according to the sampling technique, type of sorbent, method of extraction and identification technique. In this review paper we discuss various important aspects for sampling of volatile organic compounds by the widely used and advanced sampling methods. Characteristics of various adsorbents used for VOCs sampling are also described. Furthermore, this paper makes an effort to comprehensively review the concentration levels of volatile organic compounds along with the methodology used for analysis, in major cities of the world.     

Trends in background levels of persistent organic pollutants at Kosetice observatory, Czech Republic.2) Part II. Aquatic and terrestrial environments 1996-2005

A multimedia sampling of ambient air, wet deposition, surface water, sediment, soil and biota has been performed at Kosetice background observatory in the southern Czech Republic since 1988. An integrated monitoring approach was applied to assess the current state, anthropogenic impacts, and possible future changes of terrestrial and freshwater environments. Average PCB concentrations in the individual matrices calculated from ten years of sampling on multiple sites varied between 2 ng g(-1) in sediment and 7 ng g(-1) in soil or moss. DDT concentrations were lower in moss and needles (2 ng g(-1) and 4 ng g(-1), respectively) than in sediment (11 ng g(-1)) and soil (20 ng g(-1)), while the HCH level was higher in moss and needles (5 ng g(-1) and 6 ng g(-1), respectively) than in soil or sediment (1 ng g(-1) and 2 ng g(-1), respectively). The highest average level of PAHs was found in soil (600 ng g(-1)), while it was lower in needles (230 ng g(-1)), moss (210 ng g(-1)) or sediment (210 ng g(-1)). Time related trends of concentration levels of persistent organic pollutants in all matrices were investigated. Moss and needle trend patterns resembled those of the ambient air, showing a slight concentration decrease of all compounds, except for hexachlorobenzene. The soil, water and sediment concentrations showed a similar decrease of PAHs, PCBs, and HCHs, but there was no clear trend for DDTs and HCB.     

Sensitivity analysis of a parameterization of the stomatal component of the DO3SE model for Quercus ilex to estimate ozone fluxes

A sensitivity analysis of a proposed parameterization of the stomatal conductance (g(s)) module of the European ozone deposition model (DO(3)SE) for Quercus ilex was performed. The performance of the model was tested against measured g(s) in the field at three sites in Spain. The best fit of the model was found for those sites, or during those periods, facing no or mild stress conditions, but a worse performance was found under severe drought or temperature stress, mostly occurring at continental sites. The best performance was obtained when both f(phen) and f(SWP) were included. A local parameterization accounting for the lower temperatures recorded in winter and the higher water shortage at the continental sites resulted in a better performance of the model. The overall results indicate that two different parameterizations of the model are needed, one for marine-influenced sites and another one for continental sites.     

In field arsenic removal from natural water by zero-valent iron assisted by solar radiation

An in situ arsenic removal method applicable to highly contaminated water is presented. The method is based in the use of steel wool, lemon juice and solar radiation. The method was evaluated using water from the Camarones River, Atacama Desert in northern Chile, in which the arsenic concentration ranges between 1000 and 1300 μg L⁻¹. Response surface method analysis was used to optimize the amount of zero-valent iron (steel wool) and the citrate concentration (lemon juice) to be used. The optimal conditions when using solar radiation to remove arsenic from natural water from the Camarones river are: 1.3 g L⁻¹ of steel wool and one drop (ca. 0.04 mL) of lemon juice. Under these conditions, removal percentages are higher than 99.5% and the final arsenic concentration is below 10 μg L⁻¹. This highly effective arsenic removal method is easy to use and inexpensive to implement.     

Levels of perfluorochemicals in water samples from Catalonia,Spain: is drinking water a significant contribution to human exposure?

Background, aim, and scope  In recent years, due to a high persistence, biomagnification in food webs, presence in remote regions, and potential toxicity, perfluorochemicals (PFCs) have generated a considerable interest. The present study was aimed to determine the levels of perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and other PFCs in drinking water (tap and bottled) and river water samples from Tarragona Province (Catalonia, Spain). Materials and methods  Municipal drinking (tap) water samples were collected from the four most populated towns in the Tarragona Province, whereas samples of bottled waters were purchased from supermarkets. River water samples were collected from the Ebro (two samples), Cortiella, and Francolí Rivers. After pretreatment, PFC analyses were performed by HPLC-MS. Quantification was done using the internal standard method, with recoveries between 68% and 118%. Results  In tap water, PFOS and PFOA levels ranged between 0.39 and 0.87 ng/L (0.78 and 1.74 pmol/L) and between 0.32 and 6.28 ng/L (0.77 and 15.2 pmol/L), respectively. PFHpA, PFHxS, and PFNA were also other detected PFCs. PFC levels were notably lower in bottled water, where PFOS could not be detected in any sample. Moreover, PFHpA, PFHxS, PFOA, PFNA, PFOS, PFOSA, and PFDA could be detected in the river water samples. PFOS and PFOA concentrations were between <0.24 and 5.88 ng/L (<0.48 and 11.8 pmol/L) and between <0.22 and 24.9 ng/L (<0.53 and 60.1 pmol/L), respectively. Discussion  Assuming a human water consumption of 2 L per day, the daily intake of PFOS and PFOA by the population of the area under evaluation was calculated (0.78–1.74 and 12.6 ng, respectively). It was found that drinking water might be a source of exposure to PFCs as important as the dietary intake of these pollutants. Conclusions  The contribution of drinking water (tap and bottled) to the human daily intake of various PFCs has been compared for the first time with data from dietary intake of these PFCs. It was noted that in certain cases, drinking water can be a source of exposure to PFCs as important as the dietary intake of these pollutants although the current concentrations were similar or lower than those reported in the literature for surface water samples from a number of regions and countries. Recommendations and perspectives  Further studies should be carried out in order to increase the knowledge of the role of drinking water in human exposure to PFCs.     

Preparation of a porous clay heterostructure and study of its adsorption capacity of phenol and chlorinated phenols from aqueous solutions.

A porous clay heterostructure (PCH) from a Mexican clay was prepared and characterized, and its aqueous phenol and dichlorophenols (DCPs) adsorption capacities were studied using a batch equilibrium technique. The PCH displayed a surface area of 305.5 m2/g, 37.2 A average porous diameter, and a basal space of 23.2 A. The adsorption capacity shown by the PCH for both phenol and DCPs from water (14.5 mg/g for phenol; 48.7 mg/g for 3,4-DCP; and 45.5 mg/g for 2,5-DCP) suggests that the PCH has both hydrophobic and hydrophilic characteristics, as a result of the presence of silanol and siloxane groups formed during the pillaring and calcination of the PCH. The values of maximal adsorption capacity for dichlorophenols were higher than those reported for aluminum pillared clays and some inorgano-organo clays and comparable with some ionic exchange resins.     

Using Wet-FGD systems for mercury removal

A plan to control mercury emissions to the atmosphere and to establish mercury emission limits has recently been elaborated by the European Commission, making it necessary to devise an efficient and cost effective mercury removal technology. Towards this end wet flue gas desulfurization units appear as a promising option for multi-pollutant control. However, more investigation on mercury removal and a greater mercury removal efficiency are required to achieve this objective. In the present work scrubber chemistry and the application of various solid additives to enhance mercury removal in wet scrubbers is evaluated. The results obtained show a significant correlation between mercury removal efficiency and the pH of the scrubber slurry and SO2 concentration. A weaker correlation was observed between oxygen or slurry concentration and removal efficiency. Finally several solid oxides were found to be effective additives for enhancing mercury capture in wet scrubbers.     

Behaviour of different lichen species as biomonitors of air pollution by PAHs in natural ecosystems

Six different species of lichens (Parmelia sulcata Tayl., Evernia prunastri (L.) Ach., Ramalina farinacea, Pseudevernia furfuracea (L.) Zopf., Usnea sp. and Lobaria pulmonaria (Schreb.) Hoffm.) were collected in two mountain valleys in Central Pyrenees: the Aspe and Aragon valleys. Two multivariate techniques have been applied with different purposes, ANOVA and Discriminant Analysis (DA), to evaluate the data. The PAHs spatial distribution was studied in the three more abundant and widespread species in the area: P. sulcata, E. prunastri (L.) Ach. and R. farinacea in terms of total PAHs, PAHs related to the combustion processes and toxicity. Different behaviour of each lichen species to trap PAHs was found, being P. sulcata the best one to monitor the most persistent PAHs of pyrogenic origin and E. prunastri the most appropriate to provide information about pyrogenic and petrogenic PAHs. Traffic was the most relevant influence in PAHs bioaccumulation in lichen species.     

Concentrations of Potentially Toxic Metals in Urban Soils of Seville: Relationship with Different Land Uses

Fifty-two samples of surface soils were taken in the urban area of Seville, to assess the possible influence of different land uses on their metal contents and their relationship with several soil properties. The samples corresponded to five categories or land uses: agricultural, parks, ornamental gardens, riverbanks, and roadsides. Sequential extraction of metal according to the procedure proposed by the former Community Bureau of Reference (BCR) was carried out, and pseudo-total (aqua regia soluble) metal contents were determined. Lower organic C, total N and available P and K contents were found in riverbank samples, probably due to the lack of manuring of those sites, left in a natural status. In contrast, significantly higher electrical conductivity was found in those sites, due to the tidal influence of the nearby Atlantic Ocean. Other land uses did not show significant differences in the general properties. Concentrations of Cu, Pb and Zn, both aqua-regia soluble and sequentially extracted, were clearly higher in soils from ornamental gardens, whereas the concentrations in the riverbank samples were slightly lower than the other categories. In contrast, other metals (Cd, Cr, Fe, Mn, Ni) were uniformly distributed throughout all land uses. A strong statistical association is found among the concentrations of Cu, Pb, Zn and organic C, suggesting that the larger contents of these metals in ornamental gardens are partly due to organic amendments added to those sites more frequently than to other kinds of sites. Considering the conclusions of previous studies, heavy traffic can also contribute to those `urban’ metals in urban soils. Periodic monitoring of the concentrations of urban metals in busy city centres and of the quality of amendments added to soils of recreational areas are recommended.     

Evaluation of the use of bioaccumulation and biological effects tools in caged mussels,within the European Water Framework Directive

Bioaccumulation and biological effects of pollution were assessed in mussels (Mytilus galloprovincialis) caged for one month at three sites in the Oiartzun estuary (south-eastern Bay of Biscay, Spain) with the aim of evaluating their usefulness within the investigative monitoring defined in the European Union Water Framework Directive (WFD). The highest concentrations of organic contaminants determined in mussels' tissue were detected towards the inner part of the estuary but no gradient pattern was found for metal bioaccumulation. Population fitness responses measured as condition index, stress on stress and gonad index were similar in all caged mussels and did not follow the organic pollution gradient. However, biomarkers determined at tissue, cell and protein level (histopathology, micronuclei frequency, malondialdehyde levels and vitellogenin-like protein levels) revealed a higher stress syndrome at the inner part of the estuary showing signs of genotoxicity, oxidative stress and endocrine disruption. Overall, the integrated chemical–biological approach in connection with mussel caging technique proved to be a useful tool to assess environmental pollution, allowing a better understanding of the cause–effect relationship within the investigative monitoring defined in the WFD.