Cement industry: sustainability, challenges and perspectives

Cement-based materials, such as concrete and mortars, are used in extremely large amounts. For instance, in 2009 concrete production was superior to 10 billion tons. Cement plays an important role in terms of economic and social relevance since it is fundamental to build and improve infrastructure. On the other hand, this industry is also a heavy polluter. Cement production releases 5–6% of all carbon dioxide generated by human activities, accounting for about 4% of global warming. It can release huge amounts of persistent organic pollutants, such as dioxins and heavy metals and particles. Energy consumption is also considerable. Cement production use approximately 0.6% of all energy produced in the United States. On the other hand, the chemistry underlying cement production and its applications can be very helpful to overcome these environmental issues. In terms of manufacture, there are many alternative materials that can be used to minimize carbon dioxide production and reduce energy consumption, such as calcium sulfoaluminates and β-Ca₂SiO₄—rich cements. Using residues from other industrial sectors can also improve the sustainability of cement industry. Under adequate conditions, waste materials such as tyres, oils, municipal solid waste and solvents can be used as supplementary fuel in cement plants. Concrete can be used for encapsulation of waste materials such as tyres, plastics and glasses. In this review, we discuss some aspects of the cement industry associated with environmental science. Other issues such as economic aspects, the chemistry of cement manufacture and its properties are also presented. Special attention is given to the role that cement chemistry can play in terms of sustainability. The most relevant aspects are outlined, such as the use of alternative materials, new possibilities and also the recycling of materials. It is also argued that an important aspect is the role of research and development necessary to improve cement sustainability.     

Energy-ecological efficiency of dual-fuel series plug-in hybrid electric vehicle considering WTW emissions

Environmental Science and Pollution Research - This paper discussed the possibility of replacing the internal combustion engine of the series plug-in hybrid electric vehicle (PHEV) powered by...     

Electric Swing Adsorption for CO2 removal from flue gases

One of the most important sources of CO₂ emissions are the fossil-fuel fired plants for production of electricity. Removal of CO₂ from flue gas streams for further sequestration has been proposed by the International Panel on Climate Change experts as one of the most reliable solutions to mitigate anthropogenic greenhouse emissions. When natural gas is employed as fuel, the molar fraction of CO₂ in the flue gas is lower than 5% causing serious problems for capture. The purpose of this work is to present experimental validation of an Electric Swing Adsorption (ESA) technology that may be employed for carbon capture for low molar fractions of CO₂ in the flue gas streams. To improve energy utilization, an activated carbon honeycomb monolith with low electrical resistivity was employed as selective adsorbent. A mathematical model for this honeycomb is proposed as well as different ESA cycles for CO₂ capture.     

Mutagenic and recombinagenic activity of airborne particulates, PM10 and TSP, organic extracts in the Drosophila wing-spot test

The genotoxicity associated with air pollution in the city of Canoas, Rio Grande do Sul (Brazil), was assessed in November (spring) and January (summer). We applied the somatic mutation and recombination test (SMART) in Drosophila melanogaster in its standard version with normal bioactivation (ST) and in its variant with increased cytochrome P450-dependent biotransformation capacity (HB). The data indicated the genotoxicity of TSP and PM10 collected in November, in both ST and HB crosses. The genotoxic activity of the PM10 material in the spring sample was exclusively associated with the induction of mitotic recombination, whereas the TSP genetic toxicity was due to both recombinational as well as point and/or chromosomal mutation events. Considering PM10 collected in January, a positive response--100% (17.10 m3/ml) concentration--was observed in the HB cross, which was not detected in the ST cross.     

Dental microwear patterns of extant and extinct Muridae (Rodentia, Mammalia): ecological implications

Extant species of Muridae occupy a wide array of habitats and have diverse dietary habits. Consequently, their dental microwear patterns represent a potential clue to better understand the paleoecology of their extinct relatives, which are abundant in many Old World Neogene localities. In this study, dental microwear is investigated for specimens of 17 extant species of murine and deomyine rodents in order to test the reliability of this method and infer dietary preferences on the fossil species Saïdomys afarensis. This extinct form comes from a mid-Pliocene site (AL 327) located at the Hadar Formation (Ethiopia) known to have delivered many hominid specimens of Australopithecus afarensis. A significant correlation between microwear patterns and diet is detected. Thus, grass, fruit, and insect eaters display, respectively, high amounts of fine scratches, wide scratches, and large pits. Moreover, some aspects of the paleoecology of S. afarensis, including feeding habits, could be assessed in regard to its dental microwear pattern. Indeed, it probably had feeding habits similar to that of living grass eaters. These results concur with the presence of open to woodland areas covered by an herbaceous vegetal layer, including monocotyledons, in the vicinity of this mid-Pliocene locality.     

Gastroenteric Viruses Detection in a Drinking Water Distribution-to-Consumption System in a Low-Income Community in Rio de Janeiro

Food and Environmental Virology - The availability of drinking water is one of the main determinants of quality of life, disease prevention and the promotion of health. Viruses are important agents...     

Hepatitis A Virus,Hepatitis E Virus,and Rotavirus in Foods of Animal Origin Traded at the Borders of Brazil,Argentina, and Uruguay

The aim of this study was to investigate hepatitis A virus (HAV), hepatitis E (HEV), and rotavirus (RV) in fresh and processed meat traded on the border of Brazil with Argentina and Uruguay. In total, 159 samples of raw and processed foods of animal origin were collected in Paso de los Libres, Argentina (n?=?53 raw meat, n?=?24 processed meat) and Rivera, Uruguay (n?=?55 raw meat, n?=?18 processed meat), or were seized by the Brazilian International Agricultural Surveillance System—VIGIAGRO (Brazil–Argentina border) (n?=?8 raw meat, n?=?1 bush meat). All samples were tested for the presence of HAV, HEV, and RV genomes. HAV genes were detected in 18.23% of samples and RV genes in 23.89%. No HEV-positive samples were detected. HAV was also detected in two of the VIGIAGRO samples. Processed meats from Argentina and Uruguay had a higher rate of HAV and RV than raw meat (P?>?0.05). The median HAV in the Argentinian and Uruguayan samples was 6.9?×?10⁴ and 3.5?×?10³ copies/g, respectively. The presence of RV viral genes in raw meats from Argentina was significant, and this was not observed in processed meats. The presence of HAV and RV genes in a significant portion of products from Argentina and Uruguay is a potential source of human infection. This also indicates precarious conditions of acquisition, processing, and manipulation, which could be improved by improved regulation of food across borders.     

Quantifying species recovery and conservation success to develop an IUCN Green List of Species

Stopping declines in biodiversity is critically important, but it is only a first step toward achieving more ambitious conservation goals. The absence of an objective and practical definition of species recovery that is applicable across taxonomic groups leads to inconsistent targets in recovery plans and frustrates reporting and maximization of conservation impact. We devised a framework for comprehensively assessing species recovery and conservation success. We propose a definition of a fully recovered species that emphasizes viability, ecological functionality, and representation; and use counterfactual approaches to quantify degree of recovery. This allowed us to calculate a set of 4 conservation metrics that demonstrate impacts of conservation efforts to date (conservation legacy); identify dependence of a species on conservation actions (conservation dependence); quantify expected gains resulting from conservation action in the medium term (conservation gain); and specify requirements to achieve maximum plausible recovery over the long term (recovery potential). These metrics can incentivize the establishment and achievement of ambitious conservation targets. We illustrate their use by applying the framework to a vertebrate, an invertebrate, and a woody and an herbaceous plant. Our approach is a preliminary framework for an International Union for Conservation of Nature (IUCN) Green List of Species, which was mandated by a resolution of IUCN members in 2012. Although there are several challenges in applying our proposed framework to a wide range of species, we believe its further development, implementation, and integration with the IUCN Red List of Threatened Species will help catalyze a positive and ambitious vision for conservation that will drive sustained conservation action.     

Distribution coefficients of potentially toxic elements in soils from the eastern Amazon

The solid-solution distribution or partition coefficient (Kd) is a measure of affinity of potentially toxic elements (PTE) for soil colloids. Kd plays a key role in several models for defining PTE guideline values in soils and for assessing environmental risks, and its value depends on edaphic and climatic conditions of the sites where the soils occur. This study quantified Kd values for Cd, Co, Cr, Cu, Hg, Ni, Pb, and Zn from representative soil samples from Brazil’s eastern Amazon region, which measures 1.2 million km². The Kd values obtained were lower than those set by both international and Brazilian environmental agencies and were correlated with the pH, Fe and Mn oxide content, and cationic exchange capacity of the soils. The following order of decreasing affinity was observed: Pb?>?Cu?>?Hg?>?Cr?>?Cd?≈?Co?>?Ni?>?Zn.     

Environmental monitoring of water resources around a municipal landfill of the Rio Grande do Sul state,Brazil

Environmental Science and Pollution Research - In Brazil, landfills are commonly used as a method for the final disposal of waste that is compliant with the legislation. This technique, however,...