Effective Transboundary Aquifer Areas: An Approach for Transboundary Groundwater Management

The natural complexity, heterogeneity, and extent of transboundary aquifers around the world, have led to controversy over which method or criteria should be used to identify and delineate their boundaries. Currently, there is no standard methodology that aquifer‐sharing countries can use to delineate the area of a transboundary aquifer. In the case of Mexico and Texas, Mexico uses administrative boundaries, whereas Texas uses geological boundaries. This paper proposes a method for delineation and prioritization of aquifers (or aquifer areas) called effective transboundary aquifer areas (ETAAs), which uses a combination of physical criteria (geological boundaries, topography, and hydrography) and the location and density of active water wells in the borderland between Mexico and Texas. This method identifies the area of priority (productivity area) in the aquifer using pumping patterns or hot spots regardless of the aquifer’s surficial geological limits, therefore offering a more effective, local and practical management option at the transboundary level. Different geological features or pumping patterns will have different sizes and locations of ETAAs within the same aquifer. In West Texas, which is dominated by bolsons, the method produces limited options for ETAAs, whereas in South Texas in the easternmost border the identified ETAAs are more significant.     

Calibration and validation of an integrated nitrate transport model within a well capture zone

Groundwater contamination by nitrate was investigated in an agricultural area in southern Quebec, Canada, where a municipal well is the local source of drinking water. A network of 38 piezometers was installed within the capture zone of the municipal well to monitor water table levels and nitrate concentrations in the aquifer. Nitrate concentrations were also measured in the municipal well. A Water flow and Nitrate transport Global Model (WNGM) was developed to simulate the impact of agricultural activities on nitrate concentrations in both the aquifer and municipal well. The WNGM first uses the Agriflux model to simulate vertical water and nitrate fluxes below the root zone for each of the seventy agricultural fields located within the capture zone of the municipal well. The WNGM then uses the HydroGeoSphere model to simulate three-dimensional variably-saturated groundwater flow and nitrate transport in the aquifer using water and nitrate fluxes computed with the Agriflux model as the top boundary conditions. The WNGM model was calibrated by reproducing water levels measured from 2005 to 2007 in the network of piezometers and nitrate concentrations measured in the municipal well from 1997 to 2007. The nitrate concentrations measured in the network of piezometers, however, showed greater variability than in the municipal well and could not be reproduced by the calibrated model. After calibration, the model was validated by successfully reproducing the decrease of nitrate concentrations observed in the municipal well in 2006 and 2007. Although it cannot predict nitrate concentrations in individual piezometers, the calibrated and validated WNGM can be used to assess the impact of changes in agricultural practices on global nitrate concentrations in the aquifer and in the municipal well.     

Effects of municipal solid waste compost and mineral fertilizer amendments on soil properties and heavy metals distribution in maize plants (Zea mays L.)

Soil amendments based on crop nutrient requirements are considered a beneficial management practice. A greenhouse experiment with maize seeds (Zea mays L.) was conducted to assess the inputs of metals to agricultural land from soil amendments. Maize seeds were exposed to a municipal solid waste (MSW) compost (50 Mg ha⁻¹) and NPK fertilizer (33 g plant⁻¹) amendments considering N plant requirement until the harvesting stage with the following objectives: (1) determine the accumulation of total and available metals in soil and (2) know the uptake and ability of translocation of metals from roots to different plant parts, and their effect on biomass production. The results showed that MSW compost increased Cu, Pb and Zn in soil, while NPK fertilizer increased Cd and Ni, but decreased Hg concentration in soil. The root system acted as a barrier for Cr, Ni, Pb and Hg, so metal uptake and translocation were lower in aerial plant parts. Biomass production was significantly enhanced in both MSW and NPK fertilizer-amended soils (17%), but also provoked slight increases of metals and their bioavailability in soil. The highest metal concentrations were observed in roots, but there were no significant differences between plants growing in amended soil and the control soil. Important differences were found for aerial plant parts as regards metal accumulation, whereas metal levels in grains were negligible in all the treatments.     

Kinetics of simazine advanced oxidation in water

Abstract

Comparison of the effects and kinetics of UV photolysis and four advanced oxidation systems (ozone, ozone/hydrogen peroxide, ozone/UV radiation and UV radiation/hydrogen peroxide) for the removal of simazine from water has been investigated. At the conditions applied, the order of reactivity was ozone < ozone/hydrogen peroxide < UV radiation < ozone/UV radiation and UV radiation/hydrogen peroxide. Rate constants of the reactions between ozone and simazine and hydroxyl radical and simazine were found to be 8.7 M^‐1s^‐1 and 2.1x10⁹ M^‐1s^‐1, respectively. Also, a quantum yield of 0.06 mol.photon^‐1 was found for simazine at 254 nm UV radiation. The high value of the quantum yield corroborated the importance of the direct photolysis process. Percentage contributions of direct reaction with ozone, reaction with hydroxyl radicals and direct photolysis were also quantified.     

Improving the Fenton process by visible LED irradiation

The effect of irradiation with visible light-emitting diode (LED) light on the efficiency of Fenton oxidation is investigated using phenol as the target compound (100 mg/L). The H₂O₂ dose and temperature are tested as operating variables with the aim of minimizing consumption of the reagents. At 50 °C, 10 mg/L Fe²⁺, and 60 % of the stoichiometric H₂O₂ amount, phenol was completely oxidized into CO₂, H₂O, and short chain organic acids, with oxalic acid completely degraded. Up to 95 % mineralization was achieved. This high efficiency can be attributed to the effect of LED radiation on the quinones/Fe²⁺/Fe³⁺/H₂O₂ cycle, which significantly increases the reaction rate, as well as on the photodecomposition of the iron complexes formed along the oxidation process, which also enhanced mineralization.     

Occurrence of THMs and HAAs in experimental chlorinated waters of the Quebec City area (Canada)

Haloacetic acids (HAAs) and trihalomethanes (THMs) were generated in bench-scale chlorination experiments using treated waters (prior to final chlorination) of the three major drinking water utilities of the Quebec City area. The purpose was to investigate the formation and occurrence of these chlorination by-products (CBPs) on a seasonal basis. Data for HAAs, THMs and other physico-chemical parameters were produced through a six-month sampling program with variable conditions of water quality, water temperature, applied chlorine dose and reaction time. In waters from the three utilities, chloroform (THM specie), dichloroacetic and trichloroacetic acid (HAA species) were the most prevalent compounds due to the low concentrations of bromide in the utilities' raw waters. Significant differences in CBP occurrence were noted between the three utilities' chlorinated waters, mainly due to the type of disinfectant applied to raw water. The use of pre-ozonation, as opposed to pre-chlorination (or direct chlorination) in one of the utilities appears to be the major factor contributing to that utility's potential for compliance with current THM and future HAA standards. Seasonal variations in THMs and HAAs were mainly associated with variations in organic precursors and to changes in water temperature (two parameters which vary widely on a seasonal basis in surface waters of southern Quebec), with CBP occurrence at its highest in spring. Statistical correlations between HAAs and THMs were moderate and only temperature appeared to affect the preponderance of one CBP or the other. Finally, a regression analysis was carried out aimed at associating each CBP to water quality and the experimental parameters. Thanks to their predictive ability, multivariate models seem to be the tools with the best potential for decision-making purposes.     

Biochemical composition and digestive enzyme activity in larvae and postlarvae ofPenaeus japonicus during herbivorous and carnivorous feeding

The growth, survival, digestive enzyme activity and biochemical composition ofPenaeus japonicus (Bate) larvae and postlarvae were measured under three feeding regimes. Larvae were reared through the protozoeal stages usingChaetoceros gracilis. From the first mysis stage, three feeding regimes were used; (A)C. gracilis plusArtemia sp. nauplii, (B)Artemia sp. nauplii alone or (C)C. gracilis alone. No significant difference was found in growth, survival, protein content or lipid content of postlarvae from the treatments receiving the single-feed type, despite the low protein (7%) and highly unsaturated fatty acid content of the alga. Growth of larvae receiving the mixed diet was significantly higher than in the other treatments. Trypsin activity was more strongly influenced than amylase activity by dietary treatment, and differences in the ratio of these enzymes between treatments suggest independent control of their secretion. Trypsin activity recorded in larvae feeding onC. gracilis was up to six time higher than in larvae feeding onArtemia sp. nauplii, apparently in response to the low protein content of the alga. Larvae receiving the mixed diet exhibited an intermediate level of trypsin activity; it is suggested that the ingestion of algae is necessary for optimal assimilation of the zooplankton component of the diet.     

Influence of food quantity and temperature on development and growth of the marine copepod Calanus chilensis from northern Chile

An experiment under laboratory conditions was conducted to test the hypothesis that development and growth of copepodite stages in Calanus chilensis are temperature-dependent and not subject to food shortage in the upwelling area of the Humboldt Current, northern Chile. Field data obtained from June 1994 to May 1995 in Bahía Mejillones (23°S) were used to define four combinations of temperature and food under which copepodites were reared from Stage CIII to adulthood. The high temperature was 18.1 °C and the low temperature 13.1 °C, whereas the high food level was in the range of 6.8 to 24.8 μg l⁻¹ chlorophyll a and the low level 1.0 to 6.8 μg l⁻¹ chlorophyll a. As food a mixture of three unknown species of phytoflagellates and the diatom Navicula cryptocephala was used. This phytoplankton was initially obtained from the same sampling sites as copepods and kept in f/2 media at stable levels and composition throughout the experiment. The development rate (1/t), estimated from the time (t) elapsing between Stage CIV and adult, was significantly affected by both temperature and food, although low-food effects were much more remarkable. Low-food conditions also significantly reduced body length and “structural” (lipid-discounted) body mass at adulthood, while temperature only affected body length. The weight-specific growth rate was also affected by food and temperature, but again food effects were much more drastic. The results indicate that C. chilensis is a highly sensitive species to lack of food, and is possibly subject to food shortage during its annual cycle in the coastal upwelling area of northern Chile. Food limitation may help explain the seasonal pattern of adult size reported by previous studies in the area and the lack of consistence between the number of generations predictable from a temperature-dependent model and that observed in the field during the annual cycle. Received: 10 September 1996 / Accepted: 29 October 1996     

Levels and distribution of DDT in the Cinca River (Spain).

The evolution over time of the levels and distribution of dichlorodiphenyltrichloroethane (DDT) in water, surface sediments, and fish from the River Cinca (Spain), a tributary of the River Ebro, during the period 1999 to 2004, was investigated by means of gas chromatography coupled with mass spectrometry. The sampling site corresponded to a point downstream from Monzón, a heavily industrialized town with drainage into the river. This river has historically been a source of emissions of DDT and its metabolites. The highest levels were found in 1999 and 2000, although the concentrations of organic compounds in sediments and fish have decreased since then. The levels of DDT in water were below the quantification limit during the period of study. The average composition of DDT isomers measured in sediments and fish showed the prevalence of p,p'-DDE, the product of aerobic degradation of p,p'-DDT. Concentrations in fish were compared with sediment samples, and high quotients indicate that they are highly bioavailable.