Effects of Gaseous Air Pollutants on Gastric Secreto-Motor Activities in the Rat

A study was initiated to ascertain whether gaseous air pollutants can influence gastric secreto-motor activities. The investigation was conducted to determine the effect of various exposures to S0₂, N0₂, CO, and 0₃ on gastric motor activity of the conscious unrestrained rat by means of a chronic intragastric bajloon. Tfie effects produced upon gastric secretory volume and total titratable acid secretion produced by these gases were also studied in rats which were pylorus-ligated subsequent to exposure. Rats exposed to 1 ppm S0₂ for 5 days, 60 ppm CO for 2 hours, 0.5 ppm N0₂ for 2 hours, or 0.25 ppm 0₃ for 2 hours showed no change while there was gastric inhibition at 300 ppm S0₂ for 2 hours, 1400 ppm CO for 1 hour, 26 ppm N0₂ for 2 hours and 1.5 ppm 0₃ for 2 hours. In most instances following chamber flushing recovery was complete within minutes. To evaluate the site and nature of stimulation, rats were also exposed to oil of mustard, benzaldehyde, hydrogen peroxide, amyl acetate, and “Old Spice” after sh ave lotion. Saturated dental paper points were introduced without obstruction into tracheal and retro-nasal cannulae. Oil of mustard but not benzaldehyde or amyl acetate inhibited gastric motility only when applied to the trachea. In general, the drop in activity was immediate and proportional to the degree of exposure. Nasal irritation was ineffective in eliciting the response. The experimental results lead to the following conclusions: 1) Toxic levels of these gases are associated with an inhibition of gastric motility that is not produced by .exposure of the nasal passages alone to the gases. 2) Toxic levels of these gases produced no demonstrable effect upon either total gastric acid secretion or total secretory volume. These findings tend to confirm earlier observations of an association between exposure to toxic concentrations of S0₂ and loss of gastric tone in the rodent stomach.     

Technological change in Swiss thermal waste treatment: An expert-based socio-technical analysis

Understanding technological change provides a crucial basis for governing sustainability transitions. In this paper we present an analysis of technological change using the example of Swiss thermal waste processing. In recent years, increased concerns about the low quality of residues from grate-firing systems led to the examination of alternative technologies. Yet despite clear indications of a potential better performance with respect to residue quality, none of these alternatives has been adopted. Based on a two-stage knowledge integration among 15 leading experts, in a retrospective analysis we identified factors that have significantly affected technological change in Swiss thermal waste processing. These factors were then related to three technological options representing different types of technological change, i.e., from incremental improvements of the existing to the implementation of a new technology. The results indicate that technological change is currently in a technological lock-in and provide detailed insights on the causes. The lock-in results in the step-wise further development of the status quo grate-firing system despite its limitations for improving the residue qualities. Almost all factors (legal, economic, societal, technological) of the existing ‘thermal waste management’ system have been well adapted to the cost- and energy-efficient grate-firing technology, blocking innovative technologies from entering the Swiss market. In addition, pressures from the context, e.g., societal pressure related to landfill risks, have not been strong enough to promote non-incremental change.     

Prenatal assessment and management of sacrococcygeal teratoma

Sacrococcygeal teratoma (SCT) is one of the most common tumors in newborns with a birth prevalence of up to 1 in 21 700 births. Routine fetal anomaly screening programs allow for prenatal diagnosis in many cases. Fetal ultrasound with Doppler evaluation and more recently magnetic resonance imaging may be used to document the extent of the tumor as well as identifying the population at risk for serious fetal complications. Rapidly growing SCT and highly vascularized tumors are more likely to have hemodynamic repercussions. Fetal hydrops is usually considered as a poor prognostic marker and a potential indicator for fetal intervention. Newborns with SCT require stabilization prior to early surgical resection. In case of malignancy additional chemotherapy may be required. SCT may result in significant morbidity, either directly or as a consequence of surgical therapy. Careful postnatal follow-up is required for timely identification and treatment of complications as well as recurrence. This paper aims to review the perinatal management of this condition. Copyright © 2011 John Wiley & Sons, Ltd.     

Reviewing the relevance of dioxin and PCB sources for food from animal origin and the need for their inventory,control and management

Background

In the past, cases of PCDD/F and PCB contamination exceeding limits in food from animal origin (eggs, meat or milk) were mainly caused by industrially produced feed. But in the last decade, exceedances of EU limit values were discovered more frequently for PCDD/Fs or dioxin-like(dl)-PCBs from free range chicken, sheep, and beef, often in the absence of any known contamination source.

Results

The German Environment Agency initiated a project to elucidate the entry of PCBs and PCDD/Fs in food related to environmental contamination. This paper summarizes the most important findings. Food products from farm animals sensitive to dioxin/PCB exposure—suckling calves and laying hens housed outdoor—can exceed EU maximum levels at soil concentrations that have previously been considered as safe. Maximum permitted levels can already be exceeded in beef/veal when soil is contaminated around 5 ng PCB-TEQ/kg dry matter (dm). For eggs/broiler, this can occur at a concentration of PCDD/Fs in soil below 5 ng PCDD/F–PCB-TEQ/kg dm. Egg consumers—especially young children—can easily exceed health-based guidance values (TDI). The soil–chicken egg exposure pathway is probably the most sensitive route for human exposure to both dl-PCBs and PCDD/Fs from soil and needs to be considered for soil guidelines. The study also found that calves from suckler cow herds are most prone to the impacts of dl-PCB contamination due to the excretion/accumulation via milk. PCB (and PCDD/F) intake for free-range cattle stems from feed and soil. Daily dl-PCB intake for suckler cow herds must in average be less than 2 ng PCB-TEQ/day. This translates to a maximum concentration in grass of 0.2 ng PCB-TEQ/kg dm which is less than 1/6 of the current EU maximum permitted level. This review compiles sources for PCDD/Fs and PCBs relevant to environmental contamination in respect to food safety. It also includes considerations on assessment of emerging POPs.

Conclusions

The major sources of PCDD/F and dl-PCB contamination of food of animal origin in Germany are (1) soils contaminated from past PCB and PCDD/F releases; (2) PCBs emitted from buildings and constructions; (3) PCBs present at farms. Impacted areas need to be assessed with respect to potential contamination of food-producing animals. Livestock management techniques can reduce exposure to PCDD/Fs and PCBs. Further research and regulatory action are needed to overcome gaps. Control and reduction measures are recommended for emission sources and new listed and emerging POPs to ensure food safety.

     

Sociotechnical design and self-managing work groups: The impact on control

This paper compares employees perceptions of control in 20 manufacturing plants within one corporation. Four of the plants have incorporated self-managing groups as a part of their organizational design, while the other 16 plants have more traditional designs. Survey data from the 20 plants are compared and used to test a set of hypotheses derived from the literature on Sociotechnical systems. These analyses indicate that the workers and supervisors in the Sociotechnical plants have higher levels of perceived control than do their counterparts in the more traditional plants. Top and middle management respondents, how- ever, have similar perceptions of control in both the Sociotechnical and traditional plants. Discussion focuses on the impact of Sociotechnical design, the measurement of control, and future research issues in Sociotechnical design and self-managing work groups.     

Residential Construction, Land Use and the Environment. Simulations for the Netherlands Using a GIS-Based Land Use Model

The present generation of geographical information systems supports strategic planning processes in several ways. They are able to store, manage and analyse the enormous amount of data needed. Another more output-oriented use is the visualisation of the diversity of locational preferences and perspectives of different interest groups and stakeholders. For the simulation of (more indirect) effects of autonomous or planned developments land use modelling can be applied. A step further is the definition and implementation of a set of indicators that show the impact of land use change on different aspects of space and the environment in order to facilitate the (political) discussions, that are an essential part of strategic planning.This paper focuses on the application of a GIS-based simulation model in the framework of the Fifth National Physical Planning Report in the Netherlands. The simulation model generates future land use in the Netherlands given several growth scenarios and a spatial strategy that comprises both foreseen strategic and autonomous developments. Special attention is paid to residential construction because this is expected to be one of the major driving forces in land use changes. An analysis of residential construction for the period 1980–1995 reveals that residential construction has been relatively concentrated in areas close to existing urban areas. New town policies also played a rather strong role during this period. The presence of natural areas (woods and wetlands) plays a significant though limited role in the choice where to build new dwellings. The simulation results for the year 2020 are used to assess the effects of land use changes for a range of environmental indicators.