Active carbon-pools in rhizosphere of wheat (Triticum aestivum L.) grown under elevated atmospheric carbon dioxide concentration in a Typic Haplustept in sub-tropical India

Study on active and labile carbon-pools can serve as a clue for soil organic carbon dynamics on exposure to elevated level of CO2. Therefore, an experimental study was conducted in a Typic Haplustept in sub-tropical semi-arid India with wheat grown in open top chambers at ambient (370 micromol mol-1) and elevated (600 micromol mol-1) concentrations of atmospheric CO2. Elevated atmospheric CO2 caused increase in yield and carbon uptake by all plant parts, and their preferential partitioning to root. Increases in fresh root weight, volume and length have also been observed. Relative contribution of medium-sized root to total root length increased at the expense of very fine roots at elevated CO2 level. All active carbon-fractions gained due to elevated atmospheric CO2 concentration, and the order followed their relative labilities. All the C-pools have recorded a significant increase over initial status, and are expected to impart short-to-medium-term effect on soil carbon sequestration.     

Cypermethrin induced histological changes in gonadotrophic cells, liver, gonads, plasma levels of estradiol-17beta and 11-ketotestosterone, and sperm motility in Heteropneustes fossilis (Bloch)

The aim of the present investigation is to assess the impact of cypermethrin on reproductive physiology in catfish, Heteropneustes fossilis during prespawning phase. Results indicate that there is a decrease in the size of gonadotrophic cells with less granulation, pycnosis in the liver, presence of immature oocytes and atretic follicles in the ovaries and gross condensation of spermatogenic cells in testes after cypermethrin exposure at sublethal concentration. The gonado-somatic index (GSI), plasma levels of estradiol-17beta (E2) and 11-ketotestosterone (11-KT) also decreases. The motility of sperm cells is dependent on the dilution (2000 times) and duration of motility is recorded 2min maximally at 90s after post-activation. The dose 0.1 and 0.01ppm is sublethal, while 1ppm is lethal on sperm motility. Results indicate that cypermethrin causes inhibition of reproduction by acting at the hypothalamo-hypophyseal-gonadal axis as is manifest from the histological observations of gonadotrophs along with disruption of follicular wall and spermatogenic cells. Obviously such changes are responsible for decreasing the steroid hormone levels which result in decreasing scale and duration of sperm motility after 45d exposure of cypermethrin in this species.     

Application of Water Quality Indices and Dissolved Oxygen as Indicators for River Water Classification and Urban Impact Assessment

The usefulness of water quality indices, as the indicators of water pollution, for assessment of spatial-temporal changes and classification of river water qualities was verified. Four water quality indices were investigated: WQI (considering 18 water quality parameters), WQI(min) and WQI(m) (considering five water quality parameters: temperature, pH, DO, EC and TSS) and WQI(DO) (considering a single parameter, DO). The water quality indices WQI(min), WQI(m) and WQI(DO) could be of particular interest for the developing countries because of the minimum analytical cost involved. As a case study, water quality indices were used to evaluate spatial and temporal changes of the water quality in the Bagmati river basin (Nepal) for the study period 1999-2003. The results allowed us to determine the serious negative effects of the city urban activity on the river water quality. In the studied section of the river, the water quality index (WQI) was 71 units (classified as good) at the entry station and 47.6 units (classified as bad) at the outlet station. For the studied period, a significant decrease in water quality (mean WQI decrease = 11.6%, p = 0.042) was observed in the rural areas. A comparative analysis revealed that the urban water quality was significantly bad as compared with rural. The analysis enabled to classify the water quality stations into three groups: good water quality, medium water quality and bad water quality. WQI(min) resulted in overestimation of the water quality but with similar trend as with WQI and is useful for the periodic routine monitoring program. The correlation of WQI with WQI(min) and DO resulted two new indices WQI(m) and WQI(DO), respectively. The classification of waters based on WQI(m) and WQI(DO) coincided in 90 and 93% of the samples, respectively.     

Spatial–temporal variation and comparative assessment of water qualities of urban river system: a case study of the river Bagmati (Nepal)

The study presents the assessment of variation of water qualities, classification of monitoring networks and detection of pollution sources along the Bagmati River and its tributaries in the Kathmandu valley of Nepal. Seventeen stations, monitored for 23 physical and chemical parameters in pre-monsoon, monsoon, post-monsoon and winter seasons, during the period 1999-2003, were selected for the purpose of this study. The study revealed that the upstream river water qualities in the rural areas were increasingly affected from human sewage and chemical fertilizers. In downstream urban areas, the river was heavily polluted with untreated municipal sewage. The contribution of industries to pollute the river was minimal. The higher ratio of COD to BOD (3.74 in the rural and 2.06 in the urban) confirmed the increased industrial activities in the rural areas. An increasing trend of nitrate was found in the rural areas. In the urban areas, increasing trend of phosphorus was detected. The water quality measurement in the study period showed that DO was below 4 mg/l and BOD, COD, TIN, TP and TSS above 39.1, 59.2, 10.1, 0.84 and 199 mg/l, respectively, in the urban areas. In the rural areas, DO was above 6.2 mg/l and BOD, COD, TIN, TP and TSS below 15.9, 31, 5.24, 0.41 and 134.5 mg/l, respectively. The analysis for data from 1988 to 2003 at a key station in the river revealed that BOD was increasing at a rate of 1.8 mg/l in the Bagmati River. A comparative study for the water quality variables in the urban areas showed that the main river and its tributaries were equally polluted. The other comparison showed the urban water qualities were significantly poor as compared with rural. The cluster analysis detected three distinct monitoring groups: (1) low water pollution region, (2) medium water pollution region, (3) heavy water pollution region. For rapid assessment of water qualities using the representative sites could serve to optimize cost and time without loosing any significance of the outcome. The factor analysis revealed distinct groups of sources and pollutions (organics, nutrients, solutes and physicochemical).     

Physico-chemical assessment of paper mill effluent and its heavy metal remediation using aquatic macrophytes—a case study at JK Paper mill, Rayagada, India

The present investigation aims to assess the phytoremediation potential of six aquatic macrophytes, viz. Eichhornia crassipes, Hydrilla verticillata, Jussiaea repens, Lemna minor, Pistia stratiotes and Trapa natans grown in paper mill effluent of JK Paper mill of Rayagada, Orissa, for remediation of heavy metals. The experiment was designed in pot culture experiments. Assessment of physico-chemical parameters of paper mill effluent showed significant decrease in pH, conductivity, total dissolved solids, total suspended solids, chlorine, sulphur, biological and chemical oxygen demand after growth of macrophytes for 20 days. Phytoremediation ability of these aquatic macrophytic species for copper (Cu) and mercury (Hg) was indicated by assessing the decrease in the levels of heavy metals from effluent water. Maximum reduction (66.5 %) in Hg content of untreated paper mill effluent was observed using L. minor followed by T. natans (64.8 %). L. minor showed highest reduction (71.4 %) of Cu content from effluent water followed by E. crassipes (63.6 %). Phytoextraction potential of L. minor was remarkable for Hg and Cu, and bioaccumulation was evident from bioconcentration factor values, i.e. 0.59 and 0.70, respectively. The present phytoremediation approach was considered more effective than conventional chemical treatment method for removing toxic contaminants from paper mill effluent.     

Holistic approach for quantification and identification of pollutant sources of a river basin by analyzing the open drains using an advanced multivariate clustering

Global scarcity of freshwater has been gearing towards an unsustainable river basin management and corresponding services to the humans. It needs a holistic approach, which exclusively focuses on effective river water quality monitoring and quantification and identification of pollutant sources, in order to address the issue of sustainability. These days, rivers are heavily contaminated due to the presence of organic and metallic pollutants released from several anthropogenic sources, such as industrial effluents, domestic sewage, and agricultural runoff. It is astonishing to note that even in many developing countries, most of these contaminants are carried through open drains, which enter river premises without proper treatment. Such practice not only devastates riverine ecosystem but also gives rise to deadly diseases, such as minimata and cancer in humans. Considering these issues, the present study develops a novel approach towards simultaneous identification of major sources of pollution in the rivers, along with critical pollutants and locations using an advanced hierarchical cluster and multivariate statistical analysis. A systematic approach has been developed by agglomerating both R-mode and Q-mode analysis, which develops monoplots, two-dimensional biplots, rotated component matrices, and dendrograms (using “SPSS” and “Analyse It” software) to reveal relationships among various quality parameters to identify the pollutant sources along with clustering of critical sampling sites and pollutants. A case study of the Ganges River Basin of India has been considered to demonstrate the efficacy and usefulness of the model by analyzing 85 open drains. Both organic and metallic pollutants are analyzed simultaneously as well as separately to get a holistic understanding of all the relationships and to broaden the perspective of water characterization. Results provide a comprehensive guidance to the policy makers and water managers to optimize corrective efforts, minimize further damage, and improve the water quality condition to ensure sustainable development of the river basin.     

Hydrogen Peroxide and Ultraviolet Irradiations in Water Treatment

Trihalomethanes (THMs) the by-products of chlorination in water treatment are recognised as a threat to public health due to their carcinogenicity. The photodegradation of THMs using hydrogen peroxide has been found to give increased removal efficiency and the outcome of the study may find, its application in designing a unit process for water treatment. Batch experiments were carried out using UV lamp of 83 W and 40% w/w Hydrogen peroxide (H₂O₂) in test waters between 2.5–10 pH range of chloroform, bromodichloromethane, dibromochloromethane and bromoform at 50–200 μg L⁻¹ initial concentration. 92–100% removal of chloroform, bromodichloromethane, dibromochloromethane and bromoform were found with 0.1% of H₂O₂ and 90 min of UV exposure.     

Validation and Applications of a Chemical Equilibrium Model for Struvite Precipitation

Removal of nutrients like nitrogen and phosphorus from wastewater can be accomplished by precipitating these as the mineral struvite (NH₄MgPO₄. 6H₂O). Predicting struvite precipitation potential, yield, and purity is important for designers and operators of reactors for struvite precipitation. In this paper, a mathematical model of this precipitation process is developed using physicochemical equilibrium expressions, mass balance equations for nitrogen, phosphorous and magnesium, and charge balance. The model was simulated to explicitly solve for equilibrium concentrations of eighteen species that included dissolved (three), ionic (ten), and solid (five) species for a given set of initial concentrations of ammonium–nitrogen, magnesium and phosphate–phosphorus, and pH. The model simulations were validated against literature experimental data, which used synthetic as well as actual wastewater, and data from our experiments. The model satisfactorily predicted most data. Struvite fraction in the precipitate ranged from 27% to 100%. The purity of struvite in the precipitate and the pH that maximizes struvite fraction was dependent on the initial concentrations of ammonium, magnesium, and phosphate. Optimum pH and struvite fraction was, respectively, 8.5 and 29.3% for an equimolar mixture of ammonia, magnesium, and phosphate and 9.8 and 98.3% for 10:1.7:3.4 mM ratio. Struvite fraction in the precipitate increased as magnesium became limiting or as ammonia to phosphate ratio increased and magnesium to phosphate ratio decreased. Since the struvite component is only a fraction of the total solids, it is erroneous to report the total precipitate produced as being struvite as is conventionally done.     

Characterization and seasonal distribution of microplastics in the nearshore sediments of the south-east coast of India,Bay of Bengal

• MPs in the coastal sediment of south-east coast of India are quantified. • High MPs are recorded near river mouths and nearshore regions. • Polyethylene and polypropylene are the major polymers observed. • MPs contamination is higher than the values reported elsewhere. In view of increasing Microplastics (MPs) contamination in the marine environment and dearth of baseline data, a study was conducted on the abundance, characterization, and seasonal distribution of MPs in the nearshore sediments of the south-east coast of India. Sediment samples (n = 130) were collected at a distance of 1 km and 10 km from the shore region at varying depths (8–45 m) along the Chennai to Puducherry coast (165 km stretch), representing two seasons, i.e., south-west (July 2019 and July 2020) and north-east (January 2020) monsoons. The average abundance of MPs at the 22 offshore sites along the Chennai to Puducherry coast varied from 9±4.3 to 19±12.9 particles/50 g dry weight, in July 2019 and January 2020, respectively. July 2020 had an average abundance of 10±4.5 particles/50 g dry weight. Spatially, high levels of MPs were found at 1km stations and transects in proximity to the river inlets, and temporally, the north-east month recorded the maximum concentration. The dominant morphotype was the filament, and the major polymers were polyethylene and polypropylene. Scanning Electron Microscope (SEM) images revealed the surface irregularity and degradation of MPs due to weathering. The study highlights that high sediment contamination by MPs occurs during heavy rainfall and accumulates closer to river inlets. Eventually, this study suggests that appropriate management of plastic wastes on the landside will reduce MP contamination in the marine environment.     

Life cycle sustainability assessment of optimized biodiesel production from used rice bran oil employing waste derived-hydroxyapatite supported vanadium catalyst

Environmental Science and Pollution Research - The present work encompasses the production of biodiesel from an inexpensive waste, viz., used rice bran oil (URBO) through concurrent esterification...