Analysis of a system for remote, dry removal of solidified mixed waste

This paper describes a novel technology for the removal of solidified radioactive waste from underground storage tanks at the DOE Hanford site in southeast Washington. The process involves the use of a unique high pressure system which pulverizes the hardened saltcake with stainless steel pellets to a powder for easy vacuum removal. The steel pellets can be magnetically separated from the waste material for re-use. Specifically this study analyzes the effects of various steel abrasives, pressure of the air stream, and stand-off distance on removal rates and penetration depth on simulated saltcake samples using the high pressure technique. A full-scale test set-up and protocol were implemented to allow for comprehensive testing. To insure reproducibility of the method, tests were then run for the optimum removal parameters. A time-dependent test was also conducted to determine the relationship of removal rates to length of pressure blasts. The results of these tests revealed that stand-off distance and pressure could be positively correlated to removal volumes. Additionally, a statistical analysis confirmed that nozzle angle is independent of removal rate. This study demonstrated that the pellet ‘blaster’ technique is a safe, effective method for removal of radioactive wastes without any increase in either waste mass or volume.     

Review of information on pesticide residues in the Canadian environment

Summary Pesticide residues in soil, water, food, wildlife and other media have been analysed in several monitoring studies. The purpose was to establish the distribution of these residues across a defined area, ascertain their trend over a specific period and use the results to assess environmental compliance and safety. In the present review the availability of information on pesticide residues in various Canadian environmental components was sought. With the possible exception of localized pesticide contamination of some private water supply wells, ground and surface water, most analyses revealed concentrations below guideline limits. Only a few cases were reported of mishandling, misuse and poisoning from pesticides. Continuing surveillance programmes and in-depth and well-organized monitoring studies, with special focus on areas that are vulnerable to contamination, by both provincial and federal governments, are largely responsible for the encouraging results. This experience in the control of pesticide use and monitoring of residues in the environment should be of particular interest in developing countries.Dr A.Y. Sangodoyin is a senior lecturer in the Department of Agricultural Engineering at the University of Ibadan. He was recently involved in a study visit to the University of Alberta, Edmonton, Alberta, Canada T6G 2G7, where his co-author Dr D.W. Smith is a member of staff in the Department of Civil-Engineering.     

The role of corporations in ensuring biodiversity

Corporations own approximately 25% of all private land in the United States and, therefore, play an essential role in protecting biodiversity and maintaining natural habitats. The Wildlife Habitat Council (WHC) is a unique joint venture between conservation organizations and corporations to utilize corporate lands for ensuring biodiversity. The following case studies demonstrate how corporations have helped ensure healthy ecosystems and provided critical leadership in regional efforts. Amoco Chemical Company's Cooper River Plant has been instrumental in developing a cooperative project that involves numerous corporations, plantation owners, private citizens, nonprofit organizations, government agencies, and community groups to develop a comprehensive, ecosystem-based management plan for part of the Cooper River in Charleston, South Carolina, USA. The second case focuses on the Morie Company, a national sand quarry operator headquartered in southern New Jersey, USA. Morie Company is working with WHC, community groups, the Pinelands Commission, and other state regulatory agencies to explore sustainable development opportunities for companies within the Pinelands regulations. The third case takes us to DuPont Company's Asturias, Spain, site. A win—win success story of improved habitat and cost savings is the result of DuPont's concern for the environment, ability to work with a variety of groups, and willingness to consider innovative restoration techniques. The fourth case discusses Consumers Power Company's Campbell Plant in West Olive, Michigan, USA. In addition to implementing projects that contribute to biodiversity, Consumers Power has developed an environmental education field station to teach others about the importance of natural habitats. The final case highlights Baltimore Gas & Electric Company's efforts to maintain habitat for endangered species at their Calvert Cliffs site in Maryland.     

The value of “EHS auditing” in the United States: Making sense out of the current chaos

Conventional wisdom has advocated environmental auditing as a prudent part of an internal control program and one of the key tools in driving proactive efforts. As a part of risk management activities, it is often employed to protect an organization, its employees, and officers from liability. Conscientious use of such audits has undoubtedly protected human health and the environment. Ironically, those who make the most consistent efforts to audit compliance and management systems, according to advocates of audit protection, may be the most vulnerable to enforcement actions and lawsuits. This article places the escalating calls for audit protection in a proper context.     

SIMULATION OF TEMPORAL CHANGES IN RAINFALL-RUNOFF CHARACTERISTICS,COON CREEK BASIN,WISCONSIN1

ABSTRACT: Streamflow for 67 years was simulated for Coon Creek at Coon Valley, Wisconsin, for three conditions in the drainage basin: (1) conditions in the 1930s; (2) conditions in the 1970s, excluding flood-detention reservoirs; and (3) conditions in the 1970s, including flood-detention reservoirs. These simulations showed that the changes in agricultural practices over 40 years (1940–80) reduced the 100-year flood by 53 percent (from 38,900 to 18,300 cubic feet per second). The flood-detention reservoirs reduced the 100-year flood by an additional 17 percent (to 15,100 cubic feet per second). The simulation was accomplished by calibrating a precipitation-runoff model to observed rainfall and runoff during two separate periods (1934–40 and 1978–81). Comparisons of model simulations showed that differences between the model calibrations for the two periods were statistically significant at the 95 percent confidence level.     

UNCERTAINTY IN ESTIMATING BANKFULL CONDITIONS1

ABSTRACT: Bankfull depth and discharge are basic input parameters to stream planform, stream restoration, and highway crossing designs, as well as to the development of hydraulic geometry relationships and the classification of streams. Unfortunately, there are a wide variety of definitions for bankfull that provide a range of values, and the actual selection of bankfull is subjective. In this paper, the relative uncertainty in determining the bankfull depth and discharge is quantified, first by examining the variability in the estimates of bankfull and second by using fuzzy numbers to describe bankfull depth. Fuzzy numbers are used to incorporate uncertainty due to vagueness in the definition of bankfull and subjectivity in the selection of bankfull. Examples are provided that demonstrate the use of a fuzzy bankfull depth in sediment trans. port and in stream classification. Using fuzzy numbers to describe bankfull depth rather than a deterministic value allows the engineer to base designs and decisions on a range of possible values and associated degrees of belief that the bankfull depths take on each value in that range.     

OPTIMIZATION MODELING OF A NEW FACILITY FOR THE CALIFORNIA STATE WATER PROJECT1

ABSTRACT: A non-linear optimization model is applied to the California State Water Project (SWP) and portions of the Central Valley Project (CVP). The model accounts for the major hydrologic, regulatory, and operational features of both projects. The model maximizes long-term SWP yields over a 70-year period, using a quarterly time step. The potential for increased yield associated with a proposed facility improvement is evaluated with the model. The proposed facility is an extension of the Folsom-South Canal, which would allow water to be conveyed from the American River below Folsom Reservoir into New Melones Reservoir on the Stanislaus River or into the California Aqueduct. Model results indicate that extension of the Folsom-South Canal has the potential to increase SWP yields by 13 percent.     

WASTE LOADINGS FROM A FRESHWATER ATLANTIC SALMON FARM IN SCOTLAND1

ABSTRACT: Recent studies suggest that waste generation from the freshwater phase of Atlantic salmon (Salmo salar L.) production varies considerably on an annual basis. A fish farm on the West Coast of Scotland was visited regularly during a two-year period to determine inflow and outflow water quality. Waste output budgets of suspended solids (SS), biochemical oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP), total ammonia nitrogen (TAN = NH₃+NH₄⁺), dissolved reactive phosphorus (DRP) and total phosphorus (TP) were produced. The annual waste loadings obtained were 71 kg TN t fish^?1 yr^?1 (one year of data only), 10.9–11.1 kg TP t fish^?1 yr^?1, 1.2–2.1 kg DRP t fish^?1 yr^?1, 422–485 kg BOD₅ t fish^?1 yr^?1, 327–337 kg SS t fish^?1 yr^?1, and 30–35 kg TAN-N t fish^?1 yr^?1. Simple linear regression models relating waste parameter production to water temperature and feeding regime were developed. When compared to existing data for other salmonid production systems, greater ranges of daily waste loadings were observed. Wide variations in concentrations of these parameters during a daily cycle were also observed, suggesting that mass balance estimates of waste production will provide more robust estimates of waste output than frequent monitoring of outflow water quality.     

Groundwater Remediation and Aquifer Clean-Up: A Case Study

Groundwater was being remediated with pump and treat technology at a facility where the groundwater was contaminated with commonly used degreaser solvents. Hydraulic conductivity of the heterogeneous residuum was beneficiated by applying pneumatic fracturing technology. The remedial system was controlled and monitored by a sophisticated remote telemetry system. A case history follows.