Direct assessment of international consistency of standards for ground-level ozone: strategy and implementation toward metrological traceability network in Asia

An international exercise to directly assess consistency of standards for ground-level ozone in East Asia was conducted as part of the East Asian Regional Experiment 2005 (EAREX 2005) in the framework of the Atmospheric Brown Clouds (ABC) project. Ten organizations collaboratively participated in the intercomparison. Four groups representing Japan, Korea, Hong Kong, and Taiwan made comparisons at the Gosan super observatory, Jeju Island, Korea, in March 2005, with ozone instruments calibrated to their national standards, and four Japanese groups made off-site comparisons with laboratory-level standards. All comparisons generally indicated good agreement with the standard reference photometer (SRP) 35, built by the National Institute of Standards and Technology (USA) and maintained by the National Institute for Environmental Studies (Japan). The assessment was expanded to measurement networks contributing to the World Meteorological Organization's Global Atmospheric Watch (WMO/GAW) program as part of off-site comparisons, and excellent agreement was achieved. These efforts contribute to propagating traceability of the national metrology standards among the atmospheric science community, to ensuring comparability of the existing ozone measurements, and to establishing an integrated network of air quality monitoring in Asia.     

Comparative study of the effects of infrasound and low-frequency sound with those of audible sound on sleep

In order to compare the effects of infrasound and low-frequency sound on sleep with those of audible sound, healthy students were exposed to two kinds of sound, (a) infrasound and low-frequency sound (10, 20, 40, and 60 Hz), and (b) synthesized traffic noise with peak sound pressure level in low-frequency range (sound composed of low and audible frequency), throughout their sleep with the recording of the students' EEG. The effects were evaluated by the “reaction rate”. Concerning sound (a), the sound pressure level which causes the reactions of over 50% for the first time was used as the threshold sound pressure level signifying the occurrence of sleep disturbance. The threshold sound pressure levels of 10 and 20 Hz could not be evaluated. The threshold sound pressure levels of 40 and 63 Hz were 95 and 90 dB, respectively. With both sounds, the reaction rate was the highest in sleep stage 1 and the lowest in sleep stage 3+4. The pattern of sleep was little affected by sound (a). On the other hand, it was considerably affected by sound (b). These results suggest that audible sound has more harmful effects on sleep, compared with infrasound and low-frequency sound.     

Principal components derived from soil physicochemical data explained a land degradation gradient,and suggested the applicability of new indexes for estimation of soil productivity in the Sakaerat Environmental Research Station,Thailand

To find a principal component (PC) that quantifies the degree of soil degradation, we analyzed various physicochemical characteristics of soils over a land degradation gradient related to aboveground vegetation in the Sakacrat Environmental Research Station (SERS), Thailand. The aboveground vegetative types representing the degradation gradient were bare ground (BG, highly degraded), dry dipterocarp forest (DDF, moderately disturbed) and dry evergreen forest (DEF, the original vegetation). Soils under these vegetative types were sampled in February (dry season). March just after temporal precipitation) and June (rainy season) 2001. Through the period of this research, the degradation was consistently explained by sandy texture, high bulk density, lower pH, high exchangeable acidity, poor mineral and organic nutrients and dryness. Principal component analysis (PCA) was applied to determine significant principal components (PCs) that clarify the differences in soil properties between the vegetative types and between the timing of soil sampling. The PC loadings suggested that the first PC was the component that indicates total fertility of soil in the site, while the fifth PC indicates the dry to wet seasonal transition. The first PC was named the total fertility component (TFC). The linear regression between the TFC score and recently proposed indexes, the soil fertility index (SFI) or the soil evaluation factor (SEF), was highly significant (p < 0.001), indicating that the SFI and the SEF are applicable to measuring total fertility of soils in the SERS.     

Electromyographic analysis of relevant muscle groups during completion of computer tasks using different computer mouse positions

Background. We analyzed muscular activity for different computer mouse positions during the completion of a timed computer task and determined whether the different mouse positions could affect muscular activity, productivity and perceived fatigue. Methods. The subjects were nine healthy young men. Two mouse positions were studied: the distal position (DP), with the forearm rested on the desk; the proximal position (PP), with only the wrist rested on the desk. The subjects performed a 16-min task in each position. Surface electromyography data were recorded for the upper back and shoulder muscles. Work productivity and muscular activity were measured for each mouse position. A visual analog scale was used to assess subjective fatigue. Results. Muscular activity was higher in muscle (m.) deltoideus (posterior) for the DP, while it was significantly higher in m. inferior infraspinatus for the PP. The visual analog scale score was significantly higher and work productivity was lower in the PP. Conclusions. We found that using a mouse in the DP rather than the PP leads to less activity of the external rotators, less perceived fatigue and more productivity. This suggests that the DP is preferable to the PP for computer work involving a mouse.     

Risk evaluation with waste scenario: lead emissions in solder waste treatment

In this work, an estimate of the elevation of airborne lead concentrations via the lead solder contained in domestic electricity installations and an investigation into the effects of human exposure were conducted using a simulation method. The elevation of airborne lead concentrations due to incineration was calculated to be 0.001 µg/m³ maximum. The simulation results of the calculations indicated that blood lead concentrations could reach as high as 10⁻⁵ µg/dl. These concentrations could primarily be attributed to the inhalation of airborne lead particles. In addition, we discuss the influences of lead solder disposal on the ecosystem via soil and water.     

Production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from various carbon sources by batch-fed cultures ofAlcaligenes eutrophus

Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) were produced at 30°C from various carbon sources byAlcaligenes eutrophus under batch-fed growth conditions. The production of P(3HB-co-3HV) from butyric and pentanoic acids was effective under nitrogenlimited conditions, and the conversion of carbon sources into copolyester was as high as 56 wt% at a C/N molar ratio of 40. In contrast, under excess-nitrogen conditions (C/N<10), cell growth was good, while P(3HB-co-3HV) production was partially inhibited. The production of P(3HB-co-3HV) from fructose and propionic acid was almost completely inhibited under excess-nitrogen conditions.     

Dioxin-like potencies and extractable organohalogens (EOX) in medical, municipal and domestic waste incinerator ashes in Japan

Ash samples collected from medical, municipal and small-scale domestic incinerators in Japan were tested for dioxin-like activity using bioassay technique (ethoxyresorufin-O-deethylase: EROD assay) and for extractable organohalogens (EOX) using instrumental neutron activation analysis in order to estimate potential toxicity and responsible chemicals in those samples. Crude extracts and fractions cleaned-up for dioxin analysis from the samples were used for the analysis. The ranges of dioxins in the ashes were between 2.23 and 12.29 ng TEQ/g (dry weight). Relative potency ranges estimated by EROD assay in the medical incinerator ashes were 3.8-17.6 times higher than the results of conventional chemical analysis. EOX analysis suggested that ash samples contained plenty of organochlorine compounds apart from chlorinated dioxins. In addition, medical waste incinerator ashes were considered to have relatively higher amount of organoiodine compounds. In the cleaned-up fractions, bioassay potency ranges were lower than those in the crude extracts. However, some samples still exhibited higher potency than expected from chemical analysis. Though some polycyclic aromatic hydrocarbons were found in the fractions, the amounts were relatively low (0.39-10.56 ng/g). The results imply that some bioactive organohalogens that cannot be detected in the conventional chemical analysis might have potential for dioxin-like toxicity, and contribute to higher bioassay activities. The combination of the chemical analysis with the bioassay and EOX provides rough figure of dioxin-like toxicity and suggests types of organohalogen compounds that should be identified as a part of dioxin analysis for control emission from an incineration plant.     

Mechanical behavior of inert waste landfills under seismic condition

Journal of Material Cycles and Waste Management - Mechanical properties and slope stability of inert waste landfills under seismic condition were studied with three different approaches: in-situ...     

Mechanical properties of steel slag replaced mineral aggregate for road base/sub-base application based Vietnam and Japan standard

Steelmaking slag is one of the most massive industrial by-products generated during steelmaking processes. This paper presents the current steelmaking slag production status and its potential to use as mineral aggregates in base/sub-base layer of road pavement. The mechanical properties of steelmaking slag were confirmed by the test method specified in Vietnam specification. The volume stability test of the slag was conducted based on JIS A 5015-2018 (Japanese Industrial Standard: Iron and steel slag for road construction). From the results, it was confirmed that steelmaking slag can satisfy all the mechanical requirements specified in Vietnam specification and the requirements regarding stability specified in JIS A 5015-2018. In addition, it was found that the elastic modulus of steelmaking slag applied as a base or sub-base layer in pavement was higher than that of the conventional graded aggregate made from mineral aggregate. Therefore, the thickness of pavement can be reduced by using steelmaking slag, and the construction cost can be lower.