Indoor radon monitoring in Northern Iran using passive and active measurements

In this work we present the results of a 2-year survey of indoor radon variations in four cities of Lahijan, Ardabil, Sar-Ein and Namin in North and Northwest Iran. We used both passive and active measurements by solid state nuclear track detectors (SSNTDs) with CR-39 polycarbonate and PRASSI Portable radon Gas Surveyor. A total of 1124 samplers in Lahijan, Ardabil, Sar-Ein and Namin were installed. Sampling frequency was seasonal and sampling locations were randomly chosen based on dwelling structures, floors, geological formations, elevation and temperature variation parameters. For quality assurance, 281 active measurements and double sampling were carried out. Based on our results and the results of previous surveys, Ardabil and Lahijan have the second and third highest radon concentration in Iran, respectively (Ramsar is first). The average radon concentration during the year in Lahijan, Ardabil, Sar-Ein and Namin were 163, 240, 160 and 144 Bq/m(3) with medians of 160, 168, 124 and 133 Bq/m(3), respectively. These concentrations give rise to annual effective doses of 3.43 mSv/y for Lahijan and 5.00 mSv/y for Ardabil. The maximum recorded concentration was 2386 Bq/m(3) during winter in Ardabil and the minimum concentration was 55 Bq/m(3) during spring in Lahijan. Relationships between radon concentration and building materials and room ventilation were also studied. The dosimetry calculations showed that these four cities could be categorized as average natural radiation zones. The correlation coefficients relating warm and cold season radon variation data were obtained.     

Optimisation of systems to locate discrete gamma-ray sources within a large search area

Most systems used to locate discrete gamma-ray sources involve systematically passing a detector over the search area while seeking a significant increase in the observed count-rate. This paper discusses the ways in which such systems may be designed to maximise the probability of locating a source. It is shown that optimised systems use a collimated, energy-discriminating detector and overlapping counting intervals determined by the scanning geometry and speed.     

Distribution of nuclear bomb Pu in Nishiyama area, Nagasaki, estimated by accurate and precise determination of 240Pu/239Pu ratio in soils

Plutonium isotopes in forest soils collected in Nishiyama area, Nagasaki, were successfully determined by high resolution inductively coupled plasma mass spectrometry after the treatment with a microwave decomposition system. The (240)Pu/(239)Pu atom ratios observed in the samples in the Nishiyama area were obviously lower than the range of the global fallout. The low ratios (minimum 0.032) observed in Nishiyama area indicated the influence of detonation of the Pu nuclear weapon in 1945. Since the area is contaminated also by global fallout, the (240)Pu/(239)Pu atom ratio can be more sensitive indicator of bomb-derived Pu than Pu activity concentration.     

Probabilistic risk assessment for long-range atmospheric transport of radionuclides

A simplified means of probabilistic risk assessment (PRA) for long-range atmospheric transport based on a K-diffusion model is presented. In a case study, model parameters are estimated by comparing with the results of long-range atmospheric dispersion model calculations using one-year numerical weather prediction model data. It is found that the estimated ensemble mean provides a reasonable first approximation to the total dry and wet deposition from the one-year continuous release.     

The transfer of 239/240Pu to cow milk

In summer 1993 we measured the transfer of (239/240)Pu to milk from herbage from a pasture located 5 km from the Chernobyl nuclear power plant. In one treatment cows were allowed to graze freely on the pasture. In a second treatment, cows were fed herbage collected from the pasture in stalls. The milk transfer coefficient; F(m) did not vary significantly between treatments and the mean value of 7.5x10(-6)d l(-1) was higher than previously reported values. Despite many values of F(m) for Pu in the literature we identified few relevant original data sets. Transfer coefficient values for Pu are only appropriate when used in conjunction with a specified time period or an appropriate model which allows for the biological half-life. We recommend for screening purposes an F(m) value of 1x10(-5)d l(-1) for Pu, with an order of magnitude lower value being appropriate for cows which are only exposed for one grazing season.     

The value of Seasonal Correction Factors in assessing the health risk from domestic radon: a case study in Northamptonshire, UK

Following an intensive survey of domestic radon levels in the United Kingdom (UK), the former National Radiological Protection Board (NRPB), now the Radiation Protection Division of the Health Protection Agency (HPA-RPD), established a measurement protocol and promulgated Seasonal Correction Factors applicable to the country as a whole. Radon levels in the domestic built environment are assumed to vary systematically and repeatably during the year, being generally higher in winter. The Seasonal Correction Factors therefore comprise a series of numerical multipliers, which convert a 1-month or 3-month radon concentration measurement, commencing in any month of the year, to an effective annual mean radon concentration. In a recent project undertaken to assess the utility of short-term exposures in quantifying domestic radon levels, a comparative assessment of a number of integrating detector types was undertaken, with radon levels in 34 houses on common geology monitored over a 12-month period using dose-integrating track-etch detectors exposed in pairs (one upstairs, one downstairs) at 1-month and 3-month resolution. Seasonal variability of radon concentrations departed significantly from that expected on the basis of the HPA-RPD Seasonal Correction Factor set, with year-end discontinuities at both 1-month and 3-month measurement resolutions. Following this study, monitoring with electrets was continued in four properties, with weekly radon concentration data now available for a total duration in excess of three and a half years. Analysis of this data has permitted the derivation of reliable local Seasonal Correction Factors. Overall, these are significantly lower than those recommended by HPA-RPD, but are comparable with other results from the UK and from abroad, particularly those that recognise geological diversity and are consequently prepared on a regional rather than a national basis. This finding calls into question the validity of using nationally aggregated Seasonal Correction Factors, especially for shorter exposures, and the universal applicability of these corrections is discussed in detail.     

Presence, biotransformation and effects of sulfophenylcarboxylic acids in the benthic fish Solea senegalensis

The presence of linear alkylbenzene sulfonates (LAS) and their degradation intermediates, sulfophenylcarboxylic acids (SPCs), with concentrations up to 100 ppb has been found in surface waters taken from the estuary of the river Guadalete (Cádiz, SW of Spain). Higher concentrations were found at the sampling site located adjacent to the discharge outlet of a wastewater treatment plant (WWTP). The concentrations decreased downstream to a few ppb as a result of dilution, sorption, and degradation processes, which were taking place along the estuary. Once the presence of both xenobiotics was confirmed in the environment, an in vivo assay was conducted to study their biotransformation and effects in the benthic fish Solea senegalensis. A flow-through system was employed, consisting of an exposure phase (120 h) with environmental levels of the surfactant (200, 500 and 800 microg/L of 2?C(10)LAS), followed by a depuration stage (72 h). The generation of SPCs has been quantified during these phases in both water and fish, with LAS biotransformation shown in all cases. The antioxidant enzymes catalase (CAT), glutathione peroxidase (GPX), glutathione reductase (GR), the phase II enzyme glutathione S-transferase (GST), and the phase III acid and alkaline phosphatases (AcP, ALP) were also estimated and utilized as biomarkers.     

Distribution of organotin compounds in the bivalves of the Aegean Sea, Greece

Five bivalve species--Mytilus galloprovinciallis (Mediterranean mussels), Venus gallina (stripped venus), Modiola barbatus L. (bearded horse mussels), Pecten jacobeus (scallops) and Callista chione (hard clams)--were collected from seven areas in Aegean Sea, Greece, between August 2001 and January 2003 and analyzed for organotins (OTs). The concentrations (as geometric means) found were 17.1 ng g-1 for tributyltin (TBT), 18.8 ng g-1 for dibutytltin (DBT), 7.8 ng g-1 for monobutyltin (MBT) and 13.0 ng g-1 for triphenyltin (TPhT) (wet weight), which are at similar or lower levels than those reported worldwide. Studying OTs distribution between different bivalve species, lower concentrations were observed in mediterranean mussels, possibly due to their growth in water column (grown on sea net pens in mussel farms), in contrast to the free-ranging species, collected from fishing grounds. Concentrations of the OTs in the examined bivalves varied seasonally.     

A new Dasypodini armadillo (Xenarthra: Cingulata) from San Gregorio Formation,Pliocene of Venezuela: affinities and biogeographic interpretations

We describe Pliodasypus vergelianus gen. et sp. nov., a Dasypodini armadillo from the middle Pliocene of Venezuela (Vergel Member, San Gregorio Formation). Although scarce, the remains are remarkable because of their geochronologic proximity to the main phase of Great American Biotic Interchange (GABI). The cladistic analysis conducted reveals that Pliodasypus groups with Dasypus and both are sister taxa of Propraopus, whereas Anadasypus is at a basal position. With respect to the records of tribe Dasypodini, after its oldest representative (Anadasypus, middle and late Miocene), the chronologically subsequent form is Pl. vergelianus (middle Pliocene), followed by Dasypus bellus in higher northern latitudes (late Pliocene), and then by widespread occurrences in the Pleistocene of North America (D. bellus) and South America (Propraopus, Dasypus punctatus, and Dasypus novemcinctus). Thus, we infer that Dasypus differentiated in the late Pliocene at low latitudes in the northern South America. It leads to two alternative hypotheses of dispersal: (a) some early Dasypus remained cryptically in South America until the Pleistocene, whereas others dispersed to North America between 2.2 and 2.7 Ma, or (b) they dispersed to North America subsequently to the emersion of the Panamanian isthmus and D. bellus differentiated there; later, during the Pleistocene, D. bellus entered South America and experienced speciation. The same process of re-ingression has been proposed to other xenarthrans, breaking with the traditional assumption that the GABI was unidirectional.     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.