Modeling of n-butane ignition, combustion, and preflame oxidation in the 20-l vessel

The objective of the study reported herein is to simulate various physical and chemical phenomena accompanying fuel-rich n-butane–oxygen mixture preparation, ignition, preflame oxidation, and combustion in the standard 20-l explosion vessel, by applying mathematical models. Based on the computational fluid dynamics (CFD) simulations of the mixing process and natural convection of the ignition kernel, as well as on the analysis of the detailed reaction mechanism of n-butane oxidation, laminar flame propagation, and self-ignition, possible explanations for the phenomena observed experimentally have been suggested. The results of the study indicate that seemingly inflammable mixtures can become hazardous depending on the mixture preparation procedure and forced ignition timing.     

An application of 3D gasdynamic modeling for the prediction of overpressures in vented enclosures

A three-dimensional gasdynamic model with constant burning rate is applied for the prediction of the maximum pressure rise from gaseous combustion in vented enclosures. A series of calculations for an enclosure with aspect ratio close to unity are presented. Both cases with and without obstacles in the enclosure are considered. Results of calculations are compared with a simple 0D solution for spherical vessels. It is shown that, in cases without obstacles, the 0D solution for the maximum reduced overpressures is close to the predictions of the detailed modeling. In cases with obstacles, the detailed simulation gives significantly higher overpressures than those from the 0D model. However, in all the cases the reduced pressures are correlated well with the maximum flame surface area.     

Susceptibility of different yeast species to environmental toxic metals

The purpose of the study reported here was to investigate the relative resistance of yeast species to various metallic and metalloid ions, with a view to gaining more knowledge on this subject, as resistant species may become dominant in habitats contaminated with the relevant metals. Saccharomyces cerevisiae, Candida albicans and Candida tropicalis were grown in media containing different concentrations of mercury (as HgCl(2)), cadmium (as CdCl(2)), lead (as Pb(CH(3)COO)(2)), arsenic (as Na(2)HAsO(4)) and selenium (as Na(2)SeO(3)) for various intervals. Invariably, the two Candida species turned out to be more resistant to all the metals studied than S. cerevisiae. The metal showing the highest toxicity for these species was mercury, with cadmium being the second, lead, the third and arsenic and selenium being the least toxic elements. Strains showing resistance to mercury were isolated, even in the case of S. cerevisiae.     

The response of Lemna trisulca L. to cadmium

Lemna trisulca was grown, using aseptic culture techniques in a filter-sterilized medium, a portion of which was replaced regularly during experiments. L. trisulca responded to the addition of 0.64 microM Cd with a reduction in multiplication rate (MR) 2 +/- 1 days after exposure. The internal Cd content reached 1000 +/- 140 microg Cd/g (dry wt) within 2 days exposure to 0.64 microM Cd. The final yield was reduced by an average of c.8% for each day of exposure to 0.64 microM Cd in a 14 day experiment. This implies that an equilibration period should be used for short-term bioassay tests before the effect of a toxicant is determined. Pretreating L. trisulca with 0.08 or 0.32 microM Cd for 6 weeks had no significant effect on MR or Cd uptake when plants were subsequently exposed to a range of Cd concentrations or grown in a control medium. This suggests that L. trisulca does not become acclimated to elevated Cd concentrations. The MR of L. trisulca fluctuated over a period of almost 600 days and the doubling time ranged from 1.6 to 2.4 days. This produced more than a fivefold difference in final yield in experiments of 14 days duration. The reduction in MR in response to 0.32 microM Cd during this same 600 days period averaged 24% with a coefficient of variation of 38%, and varied with the MR of control cultures. Fluctuations in the intrinsic growth rate and the effect of a toxicant on L. trisulca could potentially confound the assessment of toxicity and must be carefully considered when designing test protocols for aquatic plants.     

The fate of endosulfan in aquatic ecosystems

Endosulfan, one of the major pesticides used in cotton-growing, is of environmental concern because of its toxicity to fish and its apparent persistence in the environment. This study examines the distribution and degradation pathways for endosulfan in an aquatic system and the processes by which it is removed. In the alkaline waters of the cotton region, hydrolysis is the dominant degradation process. By this mechanism alone, the expected half-lives for the alpha- and beta-endosulfan isomers were found to be 3.6 days and 1.7 days, respectively. Partitioning studies showed, however, that the major proportion of endosulfan would associate with the sediments (log Koc(alpha) 3.6 and log Koc(beta) 4.3). Field studies confirmed the presence of high concentrations in sediments. Microcosm experiments showed that loss of endosulfan was slower than predicted from hydrolysis rates. Models are presented to explain how desorption from sediment limits the loss of endosulfan from a system.     

The impact of constituent ions of acid mist on assimilation and stomatal conductance of Norway spruce prior and post mid-winter freezing

Norway spruce seedlings were sprayed twice weekly with one of a range of artificial mists at either pH 2.5, 3.0 or 5.6, for three months. The mists consisted of either (NH4)2SO4 (pH 5.6), NH4NO3 (pH 5.6), water (pH 5.6), HNO3 (pH 2.5), H2SO4 (pH 2.5). In late December 1988 and early January 1989 the light response of assimilation and stomatal conductance were assessed in the laboratory following a 4-day equilibration period at 12 degrees C. The intact trees were then subjected to a mild (-10 degrees C), brief (3 h) frost in the dark and the recovery of light saturated assimilation (Amax) was followed during the subsequent light period. The same trees were then subjected to a second 3 h (-18 degrees C) frost. The recovery of Amax during the next day was followed. All ion-containing mists stimulated Amax and apparent quantum yield relative to control trees, irrespective of pH. The mists containing SO4 made stomatal conductance unresponsive to light flux density and caused the stomata to lock open. Frosts of -10 degrees C and -18 degrees C did not inhibit the Amax of control trees for longer than 200 min into the light period. In contrast, the ion-containing mists exerted a significant inhibitory effect upon the recovery of Amax. Nitric acid inhibited Amax to 35% of the pre-frost value, whilst the remaining treatments inhibited Amax between 15% and 40% of the pre-frost value. It is concluded that SO4 causes increased mid-winter frost sensitivity and NO3 ameliortes this effect. The results are discussed in relation to forest decline.     

Petroleum and hazardous chemical spills in Newark Bay, New Jersey, USA from 1982 to 1991

Newark Bay, New Jersey, is particularly vulnerable to ecological damage from petroleum and chemical spills, as a result of the enclosed nature and shallow depth of the bay, the high frequency of shipping traffic, and the numerous chemical and petroleum transfer terminals located alongs its shores. To evaluate the potential impacts to the natural resources of this coastal estuarine ecosystem, chemical and petroleum accidents reported to the US Coast Guard (USCG) between 1982 and 1991 were compiled to determine the frequency and volume of these incidents in Newark Bay and in each of its major tributaries. Records obtained from the USCG National Response Center's computerized database indicated that more than 1453 accidental incidents, resulting in the release of more than 18 million US gallons of hazardous materials and petroleum products, occurred throughout Newark Bay during this period of time. The bulk of the materials released to the aquatic environment consisted of petroleum products, specifically No. 6 Fuel Oil (103 spills, 12 829 272 US gal) and gasoline (207 spills, 48 816 US gal). The majority of the reported incidents occurred in the Arthur Kill and its tributaries, as well as in the Kill Van Kull and the Passaic River. The results of this study indicated that the accidental discharge of petroleum and hazardous chemicals represents a significant source of chemical pollution in Newark Bay. Based on the frequency of spills and the volume of materials released to the aquatic environment, it is likely that these events are having a deleterious effect on the Newark Bay ecosystem.     

A teratological assessment of four trihalomethanes in the rat

Four trihalomethanes were administered by gavage to Sprague-Dawley rats from day 6 to day 15 of gestation. Chloroform (Ch) was administered at levels of 100, 200 and 400 mg/kg and bromoform (Br), bromodichloromethane (BDCM) and chlorodibromomethane (CDBM) were administered at levels of 50, 100 or 200 mg/kg/day. A separate control was used for each compound. Maternal weight gain was depressed in all groups receiving Ch and at the highest dose levels of BDCM and CDBM. Ch administration caused decreased maternal hemoglobin and hematocrit values at all dose levels and also produced increased serum inorganic phosphorus and cholesterol at the highest dose. Liver enlargement was observed at all dose levels of Ch but in no other treatment groups. Evidence of a fetotoxic response was observed with Ch, CDBM and Br but not BDCM. No dose-related histopathological changes were observed in either mothers or fetuses as a result of treatment. None of the chemicals tested produced any teratogenic effects.