Determination of redox potential of sulfidic groundwater in unconsolidated sediments by long-term continuous in situ potentiometric measurements

This study was undertaken to investigate the redox potential (Eh) of sulfidic groundwater in unconsolidated sediments. The Eh was determined by long-term (several days to several weeks) continuous in situ potentiometric measurements using a platinum (Pt) electrode. The Eh values measured in two monitoring campaigns were ?259 and ?202 mV, respectively. Chemical analysis of groundwater showed that the redox species in the groundwater were sulfide (S^2???) and iron, respectively. The saturation indices calculated from the chemical analysis results indicated that FeS_(am) and mainly mackinawite were close to equilibrium in the analyzed waters. Comparison of the measured Eh values with those calculated using different redox couples revealed that the Eh values measured in the first monitoring campaign were nearly equal to those calculated using HS^???/SO $_{4}{^{2-}}$ , S^2???/SO $_{4}{^{2-}}$ , FeS $_{(\text{am})}$ /SO $_{4}{^{2-}}$ , and mackinawite/SO $_{4}{^{2-}}$ redox couples; on the other hand, the Eh values measured in the second monitoring campaign were almost consistent with those measured using the FeS₂/SO $_{4}{^{2-}}$ redox couple. The good fit between the measured Eh values and the theoretical calculated Eh values suggests that the sulfur system is related to the Eh value of sulfidic groundwater in unconsolidated sediments.     

Use of an ultraviolet light-activated persulfate process to degrade humic substances: effects of wavelength and persulfate dose

Environmental Science and Pollution Research - Natural organic matter (NOM), commonly found in surface and ground waters, form disinfection by-products in drinking water. Generally, advanced...     

Bioanalytical screening methods for dioxins and dioxin-like compounds a review of bioassay/biomarker technology.

Determination of environmental pollutants utilizing biodetectors such as bioassays, biomarkers, enzyme immunoassays (EIAs), or other bioanalytical tools is a continuously growing area. The present literature review describes the principles and advantages/limitations of several bioanalytical detection methods (BDMs) for the screening and diagnosis of dioxin and dioxin-like compounds. This study characterizes briefly the family of dioxin and dioxin-like compounds, discusses potential Ah receptor (AhR) ligands and cytochrome P-450 (CYP) 1A1-enzyme-inducing compounds. 'Milestones' in the development of BDMs are summarized and explained in detail for a number of bioanalytical tools that can be used to detect these classes of dioxin-like persistent bioaccumulative toxicants (PBTs). The design of a screening profile with a battery of bioassays/biomarkers coupled with the chemical analysis is evaluated. The relative potencies (REPs) to 2,3,7,8-TCDD for dioxin-like compounds are reviewed for various BDMs and the differences are noted.     

Accumulation of paralytic shellfish poisoning toxins in planktonic copepods during a bloom of the toxic dinoflagellate<Emphasis Type="Italic"> Alexandrium tamarense</Emphasis> in Hiroshima Bay,western Japan

Concentrations of paralytic shellfish poisoning (PSP) toxins in toxic dinoflagellate cells and in marine planktonic copepods were monitored during the bloom of Alexandrium tamarense in Hiroshima Bay, western Japan. Concentration of the toxins retained by copepods was a function of the ambient toxin concentration, i.e. the product of A. tamarense cell density and cellular toxicity. The toxin concentration in copepods increased with the increase of toxicants in the seawater then leveled off, but decreased significantly at higher concentrations. In the field, the maximum toxin concentration was 1.2 pmol ind^-1, whereas in the laboratory, the copepod Acartia omorii accumulated a much higher concentration of PSP toxins (24 pmol ind^-1). Feeding avoidance against Alexandrium tamarense and a shift to alternative food sources such as diatoms in the field might keep their toxin levels lower than their potentially maximum level. The copepod toxin levels in the field were not so high as to cause an instantaneous lethal effect on their predator fishes but may reach possibly lethal levels after a few days' continuous feeding. Overall toxin retention by copepods after 12 h feeding and 2 h starvation was only 2.5% of total ingested toxins, which suggested that a significant amount of toxins was released into the seawater. Measurements of toxin reduction and gut evacuation suggested that the toxins were removed through both fecal evacuation and metabolism (e.g. excretion, decomposition and transformation). The results, as a whole, imply that copepods can be a link for PSP toxin flux in both pelagic and benthic food webs and can also be a sink for toxins by metabolizing and removing them from the environment.Communicated by T. Ikeda, Hakodate     

Prediction of physico-chemical properties for PCs/DFs using the UNIFAC model with an alternative approximation for group assignment

The original-type UNIFAC model was used to predict the environmentally important physico-chemical properties of PCDDs/DFs, such as aqueous solubility, Henry's law constant, and 1-octanol/water partition coefficient, through the UNIFAC-derived infinite dilution activity coefficient. In this application, we suggest an alternative approximation that the aromatic ether group AC-O in PCDD/DF molecules is replaced with the aliphatic ether group CH-O, because the AC-O group is not available in the conventional UNIFAC model. With this approximation, the ability of the UNIFAC model to predict those properties was examined by comparing with experimental data. The UNIFAC model provided comparatively good estimation results. From these results, it is shown that the alternative approximation is useful for the UNIFAC estimation of physico-chemical properties for PCDDs/DFs. Furthermore, the predicted solubilities of 2,3,7,8-T4CDD and O8CDD in organic solvents and the co-solvency effect on solubility of PCDDs in methanol/water mixture indicate that the UNIFAC calculation presented here could well predict the physico-chemical properties of PCDDs/DFs in various solution conditions.     

Modified clean-up for PBDD,PBDF and PBDE with an active carbon column--its application to sediments

A clean-up method for polybrominated dibenzo-p-dioxins (PBDDs), dibenzofurans (PBDFs) and diphenyl ethers (PBDEs) was modified using combinations of multi-layered silica gel, Florisil and active carbon columns. By using active carbon column chromatography in the final procedure, PBDEs were well separated from PBDD/Fs in an elution test with reference standards. We report the application of this method to sediment samples taken from industrialized areas in Japan. These sediments contained PBDEs ranging in concentration from 13 to 2394 pg/g, dry wt. PBDEs did not interfere with the quantification of PBDD/Fs. In addition, PBDEs found in the PBDD/F fraction did not interfere with the identification of PBDFs using the HRGC/HRMS separation method. Some 2,3,7,8-tetra- to hexabrominated dioxins and furans were also detected in the sediment samples.     

Working conditions and sleepiness while driving among truck drivers

Objective: The objective of this study is to identify the role of working conditions as predictors of sleepiness while driving among truck drivers.

Methods: This was a cross-sectional study carried out among truck drivers who transported grains to Paranaguá Port, Paraná, Brazil. The truck drivers were interviewed and completed a self-administered questionnaire to collect data on sociodemographic and behavioral variables, working conditions, consumption of illicit psychoactive substances, and sleep patterns. Drivers were considered to be sleepy while driving if they reported a medium or high probability of napping while driving at night, during the daytime, or while stopped in traffic. The statistical analysis used logistic regression models progressively adjusted for age, behavioral variables, sleep duration, and other working conditions.

Results: In total, 670 male drivers, with a mean age of 41.9 (±11.1) years, were enrolled. The prevalence of sleepiness while driving was 31.5%. After model adjustments, the following working conditions were associated with sleepiness while driving: Distance from the last shipment of more than 1,000?km (odds ratio [OR]?=?1.54; 95% confidence interval [CI], 1.07–2.23) and a formal labor contract with a productivity-based salary (OR = 2.65; 95% CI, 1.86–3.78). Consumption of illicit psychoactive substances (OR = 1.99; 95% CI, 1.14–3.47) was also associated with sleepiness while driving.

Conclusions: Distance traveled and a formal labor contract with productivity-based earnings were the working conditions associated with sleepiness while driving, regardless of other working or behavioral characteristics, age, consumption of illicit psychoactive substances, and sleep duration.     

Scenario analysis for recovery of rare earth elements from end-of-life vehicles

End-of-life vehicles (ELVs) are increasingly being recognized as a possible future resource pool for rare earth elements (REEs). This study provides the amount of REEs that can be recovered from ELVs in Japan based on dismantling survey, chemical identification and substance flow analysis. The REEs were quantified from common passenger vehicles and hybrid electric vehicles. We targeted 17 REEs in estimation of REE contents in ELVs. Four scenarios were developed to explore the recovery of REEs from ELVs. In these scenarios, NiMH batteries and motors containing NdFeB magnets were identified as target components due to they are main REEs carriers; we focused on interpretation of neodymium (Nd) and dysprosium (Dy) owing to they are two of the most critical REEs. The results suggest that 2700 (±500) tons of REEs can be recovered, of which 520 (±100) tons and 31 (±7) tons will be contributed by Nd and Dy in 2030. Meanwhile, the Dy recovered from ELVs can satisfy 23 % (±6 %) of the demand for NdFeB magnets and NiMH battery cells in automobile production of Japan; the Nd recovered from ELVs can satisfy 49 % (±9 %) of the production demands.     

Use of waste gypsum to replace natural gypsum as set retarders in portland cement

The present study is focused on clarifying the influence of waste gypsum (WG) in replacing natural gypsum (NG) in the production of ordinary Portland cement (OPC). WG taken from slip casting moulds in a ceramic factory was formed from the hydration of plaster of paris. Clinker and 3–5 wt% of WG was ground in a laboratory ball mill to produce cement waste gypsum (CMWG). The same procedure was repeated with NG to substitute WG to prepare cement natural gypsum (CMNG). The properties of NG and WG were investigated via X-ray Diffraction (XRD), X-ray fluorescence (XRF) and differential scanning calorimetry (DSC)/thermogravimetric (TG) to evaluate the properties of CMNG and CMWG. The mechanical properties of cement were tested in terms of setting time, flexural and compressive strength. The XRD result of NG revealed the presence of dihydrate while WG contained dihydrate and hemihydrate. The content of dihydrate and hemihydrates were obtained via DSC/TG, and the results showed that WG and NG contained 12.45% and 1.61% of hemihydrate, respectively. Furthermore, CMWG was found to set faster than CMNG, an average of 15.29% and 13.67% faster for the initial and final setting times, respectively. This was due to the presence of hemihydrate in WG. However, the values obtained for flexural and compressive strength were relatively the same for CMNG and CMWG. Therefore, this result provides evidence that WG can be used as an alternative material to NG in the production of OPC.     

Effects of a composition change of ordinary Portland cement on waste utilization and CO2 emissions in Japan

Journal of Material Cycles and Waste Management - This paper estimates the effects of a composition change of ordinary Portland cement on waste utilization and CO2 emissions in the Japanese cement...