Influence of corn steep liquor and glucose on colonization of control and CCB (Cu/Cr/B)-treated wood by brown rot fungi

There are increasing problems with regard to the disposal of treated wood waste. Due to heavy metals or arsenic in impregnated wood waste, burning and landfill disposal options are not considered to be environmentally friendly solutions for dealing with this problem. Extraction of the heavy metals and recycling of the preservatives from the wood waste is a much more promising and environmentally friendly solution. In order to study the scale up of this process, copper/chromium/boron-treated wood specimens were exposed to copper tolerant (Antrodia vaillantii and Leucogyrophana pinastri) and copper sensitive wood decay fungi (Gloeophyllum trabeum and Poria monticola). Afterwards, the ability of fungal hyphae to penetrate and overgrow the wood specimens was investigated. The fungal growths were stimulated by immersing the specimens into aqueous solution of glucose or corn steep liquor prior to exposure to the fungi. The fastest colonization of the impregnated wood was by the copper tolerant A. vaillantii. Addition of glucose onto the surface of the wood specimens increased the fungi colonization of the specimens; however, immersion of the specimens into the solution of corn steep liquor did not have the same positive influence. These results are important in elucidating copper toxicity in wood decay fungi and for using these fungi for bioremediation of treated wood wastes.     

One century sedimentary records of polycyclic aromatic hydrocarbons, mercury and trace elements in the Qinghai Lake, Tibetan Plateau

Sediments from a remote lake of northeastern Tibetan Plateau were analyzed for polycyclic aromatic hydrocarbons (PAHs) and trace metals. USEPA priority PAHs, ranged from 11 in 1860 to 279 ng g⁻¹ in 2002, while, the deposition fluxes were in the range of 0.2-11.4 ng cm⁻² yr⁻¹. Similarly, from 1860 to 2002, an increased trend of Hg flux was observed (0.5-3.2 ng cm⁻² yr⁻¹). Remarkable increase of PAHs and Hg concentration began from 1970, nearly the same period of the “Reform and Open” Policy had been embarked (1978) in China. Good correlations were found between concentrations of Pb, Zn, Cd, As, Hg, and PAHs, which suggested the sources of these chemicals in the sediment is analogous, likely from anthroprogenic sources. Based on isomer ratios, PAHs in core were dominantly from the incomplete combustion of coal. Owing to the proximity to dust source area (Qaidam Basin) and the close association between PAHs, Hg, Pb, and particle matters, atmospheric dust-transport and deposition might be the main pathways that pollutants enter into Qinghai Lake.     

Regional engagement and spatial modelling for natural resource management planning

Changing unsustainable natural resource use in agricultural landscapes is a complex social–ecological challenge that cannot be addressed through traditional reductionist science. More holistic and inclusive (or transdisciplinary) processes are needed. This paper describes a transdisciplinary project for natural resource management planning in two regions (Eyre Peninsula and South Australian Murray-Darling Basin) of southern Australia. With regional staff, we reviewed previous planning to gain an understanding of the processes used and to identify possible improvement in plan development and its operation. We then used an envisioning process to develop a value-rich narrative of regional aspirations to assist stakeholder engagement and inform the development of a land use management option assessment tool called the landscape futures analysis tool (LFAT). Finally, we undertook an assessment of the effectiveness of the process through semi-structured stakeholder interviews. The planning process review highlighted the opinion that the regional plans were not well informed by available science, that they lacked flexibility, and were only intermittently used after publication. The envisioning process identified shared values—generally described as a trust, language that is easily understood, wise use of resources, collaboration and inclusiveness. LFAT was designed to bring the best available science together in a form that would have use in planning, during community consultation and in assessing regional management operations. The LFAT provided spatially detailed but simple models of agricultural yields and incomes, plant biodiversity, weed distribution, and carbon sequestration associated with future combinations of climate, commodity and carbon prices, and costs of production. Stakeholders were impressed by the presentation and demonstration results of the software. While there was anecdotal evidence that the project provided learning opportunities and increased understanding of potential land use change associated with management options under global change, the direct evidence of influence in the updated regional plan was limited. This project had elements required for success in transdisciplinary research, but penetration seems limited. Contributing factors appear to be a complexity of climate effects with economic uncertainty, lack of having the project embedded in the plan revision process, limited continuity and capacity of end users and limited after project support and promotion. Strategies are required to minimise the controlling influence that these limitations can have.     

A Sampler for Measuring Deposited Fine Sediments in Streams1

Turner, Andy W., Jeff J. Hillis, and Charles F. Rabeni, 2012. A Sampler for Measuring Deposited Fine Sediments in Streams. Journal of the American Water Resources Association (JAWRA) 48(2): 366‐378. DOI: 10.1111/j.1752‐1688.2011.00618.x Abstract: Improvements and standardization of methodologies to quickly and accurately quantify deposited sediment in streams will allow advances in our understanding of biological effects of sedimentation. Most methods used to evaluate streambed conditions as part of biological monitoring or assessment programs are selected for ease of use, but can be subjective, inappropriate, and often of unknown accuracy. We developed a portable, light‐weight device to quantify deposited unconsolidated sediment (particles <2 mm) in wadeable streams. This deposited sediment sampler is a hand‐held unit that circumscribes an area of the streambed and through suction creates a force that suspends unconsolidated materials into a collector. Laboratory evaluations determined the efficiency (percent of available deposited sediment recovered) of the sampler to collect different sizes and concentrations of deposited sediment under differing streambed conditions, which allowed appropriate correction factors to be applied to each of four categories of streambed particle size. Field trials comparing our sampler to other methods commonly used by many state and federal agencies showed high comparability. The sampler can be constructed in just a few hours from inexpensive, easily obtained materials.     

Leaching of Cu and Zn from discarded boat paint particles into tap water and rain water

We studied the leaching of copper and zinc from particles of discarded boat paint added to tap water (pH 7.3) and rain water (pH = 4.7), simulating conditions encountered during the hosing or runoff of antifouling waste. Leaching rates appeared to be diffusion-controlled and were greater in rain water than in tap water and were greater for Zn than for Cu. After a period of 120 h, between about 0.5% and 3% of total Cu and 5-30% of total Zn had been released to the aqueous phase. These observations suggest that Cu and Zn mobilised from fine antifouling particulates during washdown or rainfall events may be important contaminants of runoff and soils in the vicinity of boat repair facilities.     

Leaching of zinc from tire wear particles under simulated estuarine conditions

Tire wear particles (TWP) abraded from end-of-life passenger car tires have been added at a concentration of 1 g L⁻¹ to river water, sea water and mixtures thereof in order to examine the chemical controls on the leaching of Zn from the rubber matrix. Results of time-dependent experiments conducted over a period of 5 days were consistent with a diffusion controlled leaching mechanism with rate constants of about 0.04 mg L⁻¹ h^−1/2 in river water and between about 0.02 and 0.03 mg L⁻¹ h^−1/2 in sea water. Additional experiments revealed a reduction in Zn dissolution with both increasing salinity and pH and enhancement of leaching in the presence of fluorescent light compared with dark conditions. In corresponding experiments conducted in the presence of a fixed quantity (0.8 g L⁻¹) of clean, fractionated estuarine sediment, aqueous Zn concentrations were reduced by at least an order of magnitude. Increasing the quantity of sediment resulted in a progressive reduction in Zn concentration until an apparent equilibrium was achieved, with partition coefficients defining the sediment-water distribution of Zn of about 550 mL g⁻¹ and 270 mL g⁻¹ in river water and sea water, respectively. Results are interpreted in terms of the dissolution of ZnO and other residual complexes from the matrix and the subsequent, rapid adsorption of Zn²⁺ ions to coexistent estuarine sediment. The findings of the study are discussed in terms of their implications for the transport, fate and effects of TWP Zn in aquatic environments that are likely to receive urban runoff.     

Extending Fabric Filter Capabilities

It has been amply demonstrated that there are reasons for improving the collection of fine participates. Some areas of research and development which may prove fruitful in extending fabric filter capabilities have been suggested.     

Sizing and Costing of fabric Filters Part II: Costing Considerations

This is the second of a two-part article that reviews baghouse filtration theory, presents size estimating methods, and gives costing procedures for a variety of baghouse types and sizes. Part I of the article discussed theory and sizing; this part presents costing. Information is given for estimating total capital investment including separate costs for the bare baghouse (five types), bags, and, where needed, cages and Venturis. Factors are given for installation and for indirect costs. Direct and indirect annual costs are discussed. An example problem is given. The material in this article is taken primarily from the EAB Control Cost Manual.     

Mechanistic Virtual Modeling: Coupling a Plant Simulation Model with a Three-dimensional Plant Architecture Component

The aim of this research is to integrate plant architectural modeling or “visualization modeling” and “mechanistic” or physiologically based modeling to describe how a real plant functions using a virtual crop. Virtual crops are life-like computer representations of crops based on individual plants and including the representation of the substrate on which the plants grow. The integration of a three-dimensional expression and the mechanistic model of plant development and growth requires the knowledge of the position of the organs along the different plant axes (the topology), their sizes, their forms, and their spatial orientation. The plant simulation model simulates the topology and organ weight or length. The superposition of spatial position and the topology produces the architecture of the plant. The association between sizes and organs creates what we refer to as the plant morphological model. Both components, the architectural model and the morphology model, are detailed in this paper. Once the integration is complete, the system produces a movie-like animation that shows the plant growing. The integrated model may simulate one or several plants growing simultaneously (in parallel). Visual capabilities make the proposed system very unique as it allows users to judge the results of the simulation the same way a farmer judges the situation of the crops in real life, by visually observing the field.