Case studies on biological treatment of tannery effluents in India

This paper presents a comparative assessment of the cost and quality of treatment of tannery wastewater in India by two common effluent treatment plants (CETPs) constructed for two tannery clusters, at Jajmau (Kanpur) and at Unnao in the state of Uttar Pradesh, India. The Jajmau plant is upflow anaerobic sludge blanket (UASB) process-based, while the Unnao plant is activated sludge process (ASP)-based. Investigations indicated that the ASP-based plant was superior in all respects. Total annualized costs, including capital and operation and maintenance costs, for the UASB and ASP plants were Rs. 4.24 million/million liters per day (MLD) and Rs. 3.36 million/MLD, respectively. Land requirements for the two CETPs were 1.4 hectares/MLD and 0.95 hectares/ MLD, respectively. Moreover, the treated UASB effluent had higher biochemical and chemical oxygen demand (BOD/ COD) and considerable amounts of other undesirable constituents, like chromium (Cr) and sulfide, as compared with the ASP effluent, which had lower BOD/COD and negligible concentration of sulfide and Cr. Sludge production from the UASB-based plant was also higher at 1.4 t/day/MLD, in comparison to the sludge production of 0.8 t/day/MLD for the ASP-based plant. Also, the entire sludge produced in the UASB-based plant was Cr-contaminated and, hence, hazardous, while only a small fraction of the sludge produced in the ASP-based plant was similarly contaminated. The results of this study are at variance with the conventional wisdom of the superiority of anaerobic processes for tannery wastewater treatment in tropical developing countries like India.     

Framework for improved confidence in modeled nitrous oxide estimates for biofuel regulatory standards

Biofuels vary greatly in their carbon intensity, depending on the specifics of how they are produced. Policy frameworks are needed to ensure that biofuels actually achieve intended reductions in greenhouse gas emissions. Current approaches do not account for important variables during cultivation that influence emissions. Estimating emissions based on biogeochemical models would allow accounting of farm-specific conditions, which in turn provides an incentive for producers to adopt low emissions practices. However, there are substantial uncertainties in the application of biogeochemical models. This paper proposes a policy framework that manages this uncertainty while retaining the ability of the models to account for (and hence incentivize) low emissions practices. The proposed framework is demonstrated on nitrous oxide (N₂O) emissions from the cultivation of winter barley. The framework aggregates uncertainties over time, which (1) avoids penalizing producers for uncertainty in weather, (2) allows for a high degree of confidence in the emissions reductions achieved, and (3) attenuates the uncertainty penalties borne by producers within a timescale of several years. Results indicate that with effective management, N₂O emissions from feedstock cultivation may be <?5% of the carbon intensity of gasoline, whereas the existing policy approach estimates emissions >?20% of the carbon intensity of gasoline. If these emissions reductions are monetized, the framework can provide up to $0.002 per liter credits (0.8 cents per gallon) to fuel producers, which could incentivize emissions mitigation practices by biofuel feedstock suppliers, such as avoiding fall N application on silty clay loam soils. The conservatism in the current approach fails to incentivize the adoption of biofuels, while the lack of specificity fails to incentivize site-level mitigation practices. Improved uncertainty accounting and consideration of farm-level practices will incentivize mitigation efforts at landscape to global scales.     

Environmental fate of chlorantraniliprole residues on cauliflower using QuEChERS technique

Chlorantraniliprole, an anthranilic diamide insecticide with novel mode of action is found effective against several lepidopteran as well as coleopteran, dipteran, and hemipteran pests. The present studies were carried out to study the dissipation pattern of chlorantraniliprole on cauliflower and to suggest suitable waiting period for the safety of consumers. Quick, easy, cheap, effective, rugged, and safe method was used for the extraction and cleanup of samples and the residues of chlorantraniliprole were estimated using high-performance liquid chromatograph (HPLC) and confirmed by liquid chromatograph–mass spectrometer and high-performance thin layer chromatograph. Following three applications of chlorantraniliprole (Coragen 18.5 SC) at recommended dose (9.25 g a.i.?ha^?1) and double the recommended dose (18.50 g a.i.?ha^?1), the average initial deposits of chlorantraniliprole were observed to be 0.18 and 0.29 mg kg^?1, respectively. These deposits were found to be less than the maximum residue limit of 2.0 mg kg^?1 prescribed by the Codex Alimentarius Commission. These residues dissipated below the limit of quantification of 0.10 mg kg^?1 after 3 and 5 days at recommended and double the recommended dosages, respectively. The half-life value (T _1/2) of chlorantraniliprole was worked out to be 1.36 days following its application at recommended dosages. Hence, the use of this pesticide at recommended dosages does not seem to pose any risk, and a waiting period of 1 day is suggested for safe consumption of cauliflower curds.     

Toxicological evaluation of constructed wetland habitat sediments utilizing 10-day sediment toxicity test and bacterial bioluminescence

A toxicological evaluation was conducted on wetland habitats created as a result of run-off from agricultural areas. These temporary wetlands were created by using drop pipes as a means of reducing erosional cutting in agricultural fields. Toxicity bioassays utilizing bacterial bioluminescence and Hyalella azteca were used to assess sediment pore water and whole sediment, respectively. Inhibition of bacterial bioluminescence was initially used to determine relative toxicities of pore water from ten wetland sites. Constructed wetland sites were compared to the University of Mississippi Biological Field Station, a relatively pristine reference site. The H. azteca ten day sediment toxicity test was utilized to assess sediment from four selected sites using survival and growth as toxicological endpoints. Results from the toxicological evaluation, along with extensive ecological evaluations, were used to assess the best approach for implementation of temporary wetland habitats with existing agricultural practices.     

Metallic components of traffic-induced urban aerosol, their spatial variation, and source apportionment

This study proposes a practical method to estimate elemental composition and distribution in order to attribute source and quantify impacts of aerosol particles at an urban region in Kolkata, India. Twelve-hour total particulates were collected in winter (2005–2006) and analyzed by energy-dispersive X-ray fluorescence technique to determine multi-elemental composition, especially trace metals. The aerosols consist of various elements including K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, and Pb which exhibit significant concentration at various sites (p?<?0.05). The concentration of different metallic elements were found in the order of Zn ?> ?Pb ?> ?Ni ?> ?Cu ?> ?Cr ?>? Co. Statistical multivariate analysis and correlation matrix analyses were performed for factor identification and consequent source apportionment. Contour profiles demonstrate spatial variation of elemental compositions indicating possible source contribution along with meteorological influences. Spatial differences were clearly most significant for Zn, Ni, Pb, and Cu reflecting the importance of anthropogenic inputs, primarily from automobile sources.     

Probing and understanding interaction of Eu(III) with γ- alumina in presenceof malonic acid

Radionuclide migration in aquatic environment is influenced by its sorption onto colloids/mineral oxides and the presence of organic complexing anions. With a view to understand the sorption of trivalent actinides by mineral oxides in presence of organic acid, in the present study, Eu(III), malonic acid (MA) and γ-alumina are considered as representatives of trivalent actinides, low molecular weight natural occurring organic acid and aluminol sites, respectively. The influence of MA on sorption of Eu(III) by γ-alumina was elucidated by batch sorption, spectroscopic techniques and surface complexation modeling, for the first time. Attenuated Total Reflection-Fourier Transform Infrared spectroscopic studies of MA sorbed on γ-alumina revealed the presence of two inner-sphere surface complexes. Batch sorption for binary (alumina-Eu(III)) and ternary (alumina-Eu(III)-MA) systems were investigated as a function of pH, Eu(III) concentration and sequential addition of Eu(III)/MA. The pH edge for Eu(III) sorption shifts to higher pH with increasing Eu(III) concentration. In ternary systems, Eu(III) sorption is significantly enhanced at pH < 4.5. Eu(III) speciation on γ-alumina is independent of addition sequence of Eu(III)/MA. Time resolved fluorescence spectroscopy of Eu(III) sorbed on γ-alumina exhibited two surface species, XOEu²⁺ and (YO)₂Eu⁺. The enhancement in I₆₁₆/I₅₉₂ and lifetime for ternary systems, as compared to binary system, at low pH, indicates the participation of Eu-MA complexes in the formation of surface species in ternary systems. The diffuse layer model has been employed to successfully model the experimental sorption profiles of binary and ternary systems, using code FITEQL 4.0, by considering the surface species identified by spectroscopic techniques.     

Effect of size variation of fibre-shaped waste tyre rubber as fine aggregate on the ductility of self-compacting concrete

Environmental Science and Pollution Research - Abandoning shredded waste tyre rubber (WTR) in cement-based mixes facilitates safe waste tyre disposal and conserves the natural resources used in...     

Particle size distribution of aerosols and associated heavy metals in kitchen environments

Mass size distributions of total suspended particulate matter (TSPM) was measured from Sep 2002 to April 2003 in indoor kitchen environments of five locations in Jawaharlal Nehru University (JNU), New Delhi, with the help of a high volume cascade impactor. Particulate matters were separated in five different size ranges, i.e. >10.9 microm, 10.9-5.4 microm, 5.4-1.6 microm, 1.6-0.7 microm and <0.7 microm. The particle size distribution at various sites appears to follow uni-modal trend corresponding to fine particles i.e. size range <0.7 microm. The contributions of fine particles are estimated to be approximately 50% of TSPM and PM10.9, while PM10.9 comprises 80% of TSPM. Good correlations were observed between various size fractions. Regression results reveal that TSPM can adequately act as a surrogate for PM10.9 and fine particles, while PM10.9 can also act as surrogate for fine particles. The concentrations of heavy metals are found to be dominantly associated with fine particles. However, the concentration of some metals and their size distribution, to some extent is also site specific (fuel type used).     

Effect of nitrogen, potassium and humic acid on 134 Cs transfer factors to wheat from tropical soils in Neubauer growth units

A Neubauer plantlet experiment was carried out using Inceptisol (Typic Haplustept) and Vertisol (Typic Chromustert) soils contaminated with 134Cs at 74 kBq kg(-1) soil to study the transfer factor to wheat crop (Triticum aestivum) as influenced by four levels of humic acid (100, 200, 300, 400 mg HA kg(-1) soil), potassium and NH4-N (36.4, 54.5, 72.7 and 90.9 mg K or NH4 kg(-1) soil) under tropical climate. The biomass yield and K uptake by wheat were significantly improved in Vertisol with NH4-N and K application. The potassium application significantly increased the potassium concentration in wheat plants. The increase in the levels of each of the treatments dramatically improved the yield, K content and K uptake parameters, irrespective of the soils. The 134Cs transfer factors, irrespective of the treatments were observed to be higher in Vertisols as compared to Inceptisols. Among the treatments, the effect of HA was significantly greater than that of K and NH4-N application in Inceptisol, however, in Vertisols both HA and NH4-N were observed to be superior as compared to K application. With each increment in the levels of the treatments, a significantly lowered TF value was found, higher in Inceptisols (56.3%) than Vertisols (48.5%). Comparison of treatments indicates that in general higher potassium concentration in plant drastically lowered radiocesium transfer to wheat. Neubauer plant culture study, a rapid laboratory experimental model based on simple soil-plant system was quite clearly brought out the potential effectiveness of N, K and HA on soil-to-wheat transfer of radiocesium. Such screening technique needs to be extended to cover wider crop species, different climatic conditions and factors governing/modifying the mobility of radiocesium in soil and its absorption by crop plants.     

Analysis of heavy metals in marine fish from Mumbai Docks

Seafood containing heavy metals as a result of environmental contamination causes toxicity in human beings. To evaluate such kind of contamination, our study targeted the analysis of metals such as lead, copper, cadmium, mercury, and arsenic in muscle tissue of the fish. The fish commonly consumed such as Brama brama (Pomfret), Rachycentron canadus (Surmai/King Fish), Rastrelliger kanagurta (Mackerel), Eleutheronema tetradactylum (Ravas/Indian salmon), and Metapenaeus monoceros (Brown Prawn) were collected from four different docks in the city. The heavy metals in tissue samples of fish were estimated using voltammeter and cold vapor atomic absorption spectrophotometer. Heavy metal concentration in the tissues varied significantly depending upon the locations from where the fish were collected. Although the concentration of arsenic, copper, cadmium, and lead were in normal range, the concentration of mercury was found to exceed the daily permissible levels (1 μg/g) as a food source for human consumption. We have analyzed heavy metals from different locations in Mumbai—Versova dock, Sassoon dock, Navi Mumbai dock, and Mazgaon dock.