The synergistic effect of air mass on outdoor performance for different PV module in India

The effect of air mass (AM) on the performance of multi-crystalline silicon (m-Si), amorphous silicon (a-Si), and hetero-junction with intrinsic thin layer (HIT)-technology-based photovoltaic (PV) modules are evaluated for representative day of four seasons during the year 2011 for composite climate of India. To find the best performing PV module technology with respect to AM at the site, annual energy yields and performance ratio against different AM bands (AM 1–4.5) are plotted. It is found that HIT modules perform better than m-Si and a-Si at each AM band. Annual energy yields for all three technologies decrease with increasing order of AM bands. The performance ratio for HIT and m-SI modules initially increases and then decreases with increasing order of AM bands. However, for a-Si modules, the performance ratio decreases with increasing order of the AM bands.     

Molasses-based growth and lipid production by Chlorella pyrenoidosa: A potential feedstock for biodiesel

Biodiesel provides a feasible solution to the twin crisis of energy security and environmental concerns prevalent today, and it can be extracted from conventional oil crops as well as microalgae. However, lipid productivity in case of microalgae is much higher and has several advantages as compared with crop plants, so it is a better feedstock for biodiesel. In case of Chlorella pyrenoidosa, the heterotrophic cultured cells were found to be better in terms of lipid production, and ultimately biodiesel production, but the bottleneck is that in this mode glucose is used to feed the cells, which amounts to almost 80% of the total cost of biodiesel production. The purpose of this study is to evaluate and highlight the feasibility of using the industrially cheap cane molasses as a carbon source in place of glucose for a large-scale, low-cost lipid production of Chlorella pyrenoidosa. When treated molasses was used as a carbon source instead of glucose, the biomass sharply increases from 0.89 to 1.22 g L^–1. On the other hand, the total lipid content increases from 0.27 to 0.66 g g^–1. The specific growth rate and yield was higher in treated molasses as compared with that in glucose-supplemented. A mathematical model was also developed based on logistic, Luedeking–Piret, and Luedeking-Piret-like equations. Model predictions were in satisfactory agreement with the measured data, and the mode of lipid production was growth-associated.     

Photodegradation of Oryzalin in aqueous isopropanol and acetonitrile

The phototransformation of Oryzalin was studied under UV light (λ_max ≥ 290 nm) and sunlight (λ_max ≥ 250 nm) in aqueous isopropanol and acetonitrile solution in absence and presence of TiO₂ as sensitizer. The rate of photodegradation of Oryzalin in different solvent system followed first-order kinetics, and calculated half-lives were found to be in the range of 23.52-53.75 h for UV light and 41.23-61.43 h for sunlight. From this study, total 12 photoproducts were identified and characterized on the basis of column chromatography and Q-Tof micromass spectral data. The plausible mechanism of phototransformation involved was hydrolysis, breaking of sulfonic bond, and loss of amino and sulfonic acid group.     

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the “zero concept” of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.     

The cause and consequences of road mortality of herpetofauna in durgapur,West Bengal,India

The mortality rate of herpetofauna due to road accidents in one of the busiest tarmacked metalled roads of Durgapur, an industrial town of West Bengal, India was studied. Road survey for 27 days covering a total distance of 94.5 km was conducted. Within this span of time and the total stretch of road, 354 amphibians belonging to 6 species and 133 reptiles belonging to 11 species were observed to be killed in road-accidents. Among amphibians, Duttaphrynus melanostictus and amongst the reptiles Hemidactylus spp. were killed in highest numbers. The stretch of road under survey passed through different habitat patches like’s agricultural land, human habitation, dumping area, fragmented forest and wetland. On an average, 18 herpetofauna was noted to be killed daily. It was difficult to identify the species as the key characters were missing in the remains in a few cases of road casualties. High road mortality of herpetofauna would surely affect the balance of adjoining ecosystems as well as may be crucial for the local herpetofaunal population attributes.     

Performance evaluation of dolomite production waste in development of sustainable concrete: hardened properties and ecological assessment

Journal of Material Cycles and Waste Management - Dolomite production waste is a by-product generated by dolomite mining, causing environmental pollution and other associated issues worldwide. In...     

Comprehensive investigation of various re-refining technologies of used lubricating oil: a review

Journal of Material Cycles and Waste Management - Waste lubricating oil is considered to be a hazardous waste and has tremendous impact on human health and environment. The present review...     

Recycling potential of MWCNTs/HDPE nanocomposite filament: 3D printing and mechanical characterization

Journal of Material Cycles and Waste Management - Fused filament fabrication (FFF) based additive manufacturing (AM) process is a widely used and emerging manufacturing process for...