Perfluorosulfonates and perfluorocarboxylates in snow and rain in Dalian,China

Samples of precipitation events (snow and rain) in Dalian, a typical coastal town in China, were analyzed for perfluorosulfonates (PFSAs) and perfluorocarboxylates (PFCAs) to investigate atmospheric contamination by these compounds. In the snow event on December 16, 2006, samples were collected from 21 different sites and in another 6 precipitation events, samples were collected from a single location. Four PFSAs (C4, C6, C8, C10) and seven PFCAs (C6–12) were analyzed. Among the homologues, perfluorooctane sulfonate (PFOS) concentrations were the highest with a geometric mean (GM) of 145 ng/L (n = 21) during the snow event on December 16, 2006, followed by perfluorooctanoate (PFOA) with a GM of 24.7 ng/L (n = 21). Concentrations of perfluorobutane sulfonate (PFBS), perfluorohexane sulfonate (PFHxS) and perfluoroheptanoate (PFHpA) were more than two orders of magnitude lower than that of PFOS. Other PFSAs and PFCAs were found to be below the limit of detection in all the samples. In other 6 precipitation events, PFSAs and PFCAs were detected approximately in the same order of magnitude in both snow and rain. The results indicate that wet deposition may be a potential transport mechanism of perfluorinated chemicals in the environment.     

Sorption of alkylphenols on Ebro River sediments: comparing isotherms with field observations in river water and sediments

This study reports sorption isotherms of the endocrine disruptors nonylphenol (NP) and octylphenol (OP) in three sediment samples from the Ebro River basin (NE Spain), with organic carbon fractions (f_OC) ranging from 0.0035 to 0.082 g_OC g⁻¹. All isotherms were fitted to the Freundlich model with slightly nonlinear exponents ranging from 0.80 to 0.94. The solubility of the compounds as well as the organic carbon (OC) content had the strongest influences on the sorption behavior of these compounds. Comparison of the laboratory-spiked samples with the native contamination of NP of 45 water and concurrent sediment samples resulted in reasonable matches between both data sets, even though the lowest concentrations in the field were not completely reached in laboratory tests. This good agreement indicates that sorption laboratory data can be extrapolated to environmental levels and therefore the distribution of nonylphenol between sediments and water can be predicted with a precision of one order of magnitude. Furthermore, laboratory experiments with simultaneous loading of NP and OP revealed negligible competition for sorption sites at low concentrations.     

Spectroscopic analysis of NIR-dye sensitization in bulk heterojunction polymer solar cells

The photovoltaic conversion efficiency for near-infrared (NIR) sunlight is improved successfully by dye sensitization of bulk heterojunction polymer solar cells, in which the active layer was prepared by a ternary blend of poly(3-hexylthiophene), a fullerene derivative (1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene), and an NIR dye, silicon phthalocyanine bis(trihexylsilyl oxide). The mechanism of the NIR-dye sensitization is studied by femtosecond transient absorption spectroscopy.     

Spectroscopic Analysis of NIR-Dye Sensitization in Bulk Heterojunction Polymer Solar Cells

The photovoltaic conversion efficiency for near-infrared (NIR) sunlight is improved successfully by dye sensitization of bulk heterojunction polymer solar cells, in which the active layer was prepared by a ternary blend of poly(3-hexylthiophene), a fullerene derivative (1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene), and an NIR dye, silicon phthalocyanine bis(trihexylsilyl oxide). The mechanism of the NIR-dye sensitization is studied by femtosecond transient absorption spectroscopy.     

Quantitative analysis of perfluorinated chemicals in media for in vitro fertilization and related samples

The actual standard in vitro fertilization (IVF) protocol recommends an overnight gamete co-incubation. All of the culture media used for human IVF are supplemented with serum or albumin. In the present study, we determined the concentrations of perfluorinated chemicals (PFCs) in IVF media (IVFM) and related samples by liquid chromatography with tandem mass spectrometry (LC/MS/MS). The results indicated that the concentrations of PFOS and PFOA in the protein source were higher than those in the IVFM samples. Compared with human plasma concentrations of PFCs, PFCs in all of the IVFM samples, such as PFBS, PFHxS and PFOA, were either not detected or present at only trace levels, even when protein source was added. LC/MS/MS could be used to determine PFCs in IVFM samples in future studies of the effects of PFC exposure on intrauterine insemination.     

Estrogen equivalent concentration of 13 branched para-nonylphenols in three technical mixtures by isomer-specific determination using their synthetic standards in SIM mode with GC-MS and two new diasteromeric isomers

Thirteen isomers of branched para-nonylphenols (para-NP) in three technical mixtures were isomer-specifically determined using their synthesized standards by SIM of structurally specific ions, m/z 135, 149 or 163 with GC–MS. Of the 13 isomers, four isomers, 4-(2,4-dimethylheptan-4-yl)phenol, 4-(4-methyloctan-4-yl)phenol, 4-(3-ethyl-2-methylhexan-2-yl)phenol (3E22NP) and 4-(2,3-dimethylheptan-2-yl)phenol synthesized for their determinations were first used as standard substances. The 13 isomers in the technical mixtures individually occurred at mass percent portion of more than 2%. The total mass percent portions in the mixtures from Tokyo Chemical Industry (TCI), Aldrich, and Fluka covered with 89 ± 2%, 75 ± 4% and 77 ± 2%, respectively. The abundance of 4-(3,6-dimethylheptan-3-yl)phenol in the three mixtures was the largest with 11.1 ± 2% to 9.9 ± 0.3%, while that of 4-(2-methyloctan-2-yl)phenol was the smallest with 2.9 ± 0.3% to 3.0 ± 0.2%. Additionally, structures of four new isomers of more than 1% portion present in a technical mixture were elucidated as two pairs of diastereomeric isomers: two types of 4-(3,4-dimethylheptan-4-yl)phenol (344NP) and those of 4-(3,4-dimethylheptan-3-yl)phenol (343NP). By estrogenic assay of 13 isomers with yeast estrogen screen system, the activity of 3E22NP was the highest, while that of 4-(3-methyloctan-3-yl)phenol was the least. Their relative activities to that of 3E22NP were individually calculated. Estrogenic equivalent concentrations of the three technical mixtures were predictively evaluated. The ratio of the EEC to the conventional concentration, total mass percent portions of the 13 isomers in technical mixtures were 0.208 for TCI, 0.206 for Aldrich and 0.205 for Fluka. The predicted estrogenic activity of measured concentration of para-NP in technical mixtures was approximately 5-fold greater than the measured estrogen agonist activity.     

Removal of thiobencarb in aqueous solution by zero valent iron

A cost-effective method with zero valent iron (ZVI) powder was developed for the purification of thiobencarb (TB)-contaminated water. The removal treatment was performed in the batch system. A sample solution of 10 ml containing 10 microg ml(-1) of TB could be almost completely treated by 100mg of ZVI at 25 degrees C for 12h of treatment time. Since the formation of chloride ion in the aqueous solution during the treatment of TB was observed, the removal of TB with ZVI may contain two processes: reduction (degradation) and adsorption. Because the present treatment for TB is simple, easy handling and cheap, the developed technology with ZVI can contribute to the treatment of agricultural wastewaters.     

Separation and characterization of the colored material from sugarcane molasses

The colored material (X) was effectively separated from sugarcane molasses using reversed-phase chromatography. Characterization of the molecular structure of sample X was performed using infrared absorption (IR) spectrometry, mass spectrometry (MS), and dynamic light scattering (DLS). The IR spectrum was similar to that of commercial humic acid, and the MS analysis showed that the sample possessed relatively small heterogeneous molecules with molecular masses around 234, 446, 657, 868, and 1079 Da. On the other hand, X sample showed an inhibitory activity toward the cysteine proteinase papain. Furthermore, the inhibitory (G-1) and weak inhibitory (G-2) fractions were separated from sample X using gel permeation chromatography. Samples G-1 and G-2 inhibited papain partial-noncompetitively and had the inhibition constants of 5.01 x 10(-5) and 1.08 x 10(-3)M, respectively. Interestingly, in the DLS experiment, the Stokes radius of sample G-1 was approximately 2 nm, about twice one of sample G-2.     

Separation, synthesis and estrogenic activity of 4-nonylphenols: two sets of new diastereomeric isomers in a commercial mixture

Two sets of new diastereomeric 4-nonylphenol (NP) isomers [4-(3,4-dimethylheptan-4-yl)phenol (344NP, NP-J, L) and 4-(3,4-dimethylheptan-3-yl)phenol (343NP, NP-K, P)] were separated from a commercial NP mixture. The mixture of these diastereomers was synthesized at the same time by a single Friedel-Crafts reaction of 3,4-dimethyl-4-heptanol and phenol, and the mixture was separated into individual NPs by HPLC equipped with Hypercarb column. For the first time, in this study the stereostructure-estrogenic activity relationship of NP diastereomers was investigated. The NP isomers (NP-L and NP-P) having the beta-methyl group over the benzene ring were found to be 2-4 times more estrogenic than their diastereomers (NP-J and NP-K). In the case of the other set of diastereomer [4-(3,5-dimethylheptan-3-yl)phenol, (353NP, NP-E, G)] containing gamma-methyl group in the molecule, the gamma-methyl proton signal (delta 0.49) in the more estrogenic isomer (NP-G) also appeared in a higher field than the corresponding methyl signal (delta 0.76) of the less estrogenic isomer (NP-E).     

Simultaneous treatment of PVC and oyster-shell wastes by mechanochemical means

This work presents a new process for dechlorinating poly-vinyl chloride (PVC) by the use of oyster-shell waste. The process consists of milling of PVC waste with oyster-shell waste, followed by washing the milled sample with water. The milling of PVC and oyster-shell mixture results in size reduction and rupture in bonds, leading to mechanically induced reactions between the two to form CaCl2 and hydrocarbon with C=C bonds. Washing the milled mixtures with water at room temperature allows complete removal of chlorine from the milled sample. More than 95% of chlorine in PVC was removed when 2h grinding is conducted for the mixture. The present process could offer a potential route to the handling and disposal of oyster-shell and PVC wastes.