Shellfish-Borne Viral Outbreaks: A Systematic Review

Investigations of disease outbreaks linked to shellfish consumption have been reported in the scientific literature; however, only few countries systematically collate and report such data through a disease surveillance system. We conducted a systematic review to investigate shellfish-borne viral outbreaks and to explore their distribution in different countries, and to determine if different types of shellfish and viruses are implicated. Six databases (Medline, Embase, Scopus, PubMed, Eurosurveillance Journal and Spingerlink electronic Journal) and a global electronic reporting system (ProMED) were searched from 1980 to July 2012. About 359 shellfish-borne viral outbreaks, alongside with nine ProMED reports, involving shellfish consumption, were identified. The majority of the reported outbreaks were located in East Asia, followed by Europe, America, Oceania, Australia and Africa. More than half of the outbreaks (63.6 %) were reported from Japan. The most common viral pathogens involved were norovirus (83.7 %) and hepatitis A virus (12.8 %). The most frequent type of consumed shellfish which was involved in outbreaks was oysters (58.4 %). Outbreaks following shellfish consumption were often attributed to water contamination by sewage and/or undercooking. Differences in reporting of outbreaks were seen between the scientific literature and ProMED. Consumption of contaminated shellfish represents a risk to public health in both developed and developing countries, but impact will be disproportionate and likely to compound existing health disparities.     

Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

Management strategies to mitigate the impacts of climate change on sea turtle’s terrestrial reproductive phase

Climate change poses a serious threat to sea turtles (Cheloniidae) as their terrestrial reproductive phase is only successful within a limited range of environmental and physical conditions. These conditions are likely to become less optimal as climate change progresses. To date, management and conservation of sea turtles has focused almost entirely on non-climatic stressors, due at least in part to practitioners not knowing what strategies to take and the feasibility and risks of potential strategies. To aid the management of sea turtles in a changing environment, we identified management strategies via a focus workshop and surveys to mitigate the impacts of climate change to the terrestrial reproductive phase of sea turtles. The effectiveness, ecological risks and potential social and logistical constraints associated with implementing each of the identified management strategies is discussed. Twenty management strategies were identified; strategies varied from habitat protection to more active and direct manipulation of nests and the nesting environment. Based on our results, we suggest a three-pronged approach to sea turtle conservation in light of climate change, where managers and researchers should: 1) enhance sea turtle resilience to climate change by mitigating other threats; 2) prioritise implementing the ‘no regret’ and ‘reversible’ management strategies identified here; and 3) fill the knowledge gaps identified to aid the trial and implementation of the potential strategies identified here. By combining these three approaches our collective toolkit of sea turtle management strategies will expand, giving us an array of viable approaches to implement as climate change impacts become more extreme.     

Coastal flooding,climate change and environmental justice: identifying obstacles and incentives for adaptation in two metropolitan Boston Massachusetts communities

We explored the possible future impacts of increased coastal flooding due to sea level rise and the potential adaptation responses of two urban, environmental justice communities in the metropolitan Boston area of Massachusetts. East Boston is predominantly a residential area with some industrial and commercial activities, particularly along the coastal fringe. Everett, a city to the north of Boston, has a diversified industrial and commercial base. While these two communities have similar socioeconomic characteristics, they differ substantially in the extent to which residents would be impacted by increased coastal flooding. In East Boston, a large portion of residents would be flooded, while in Everett, it is the commercial/industrial districts that are primarily vulnerable. Through a series of workshops with residents in each community, we found that the target populations do not have an adaptation perspective or knowledge of any resources that could assist them in this challenge. Furthermore, they do not feel included in the planning processes within their communities. However, a common incentive for both communities was an intense commitment to their communities and an eagerness to learn more and become actively engaged in decisions regarding climate change adaptation. The lessons that can be applied to other studies include 1) images are powerful tools in communicating concepts, 2) understanding existing cultural knowledge and values in adaptation planning is essential to the planning process and 3) engaging local residents at the beginning of the process can create important educational opportunities and develop trust and consensus that is necessary for moving from concept to implementation.     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

External force-assisted laser forming process for gaining high bending angles

Laser forming process is used in forming and bending of metallic and non-metallic sheets. Laser beam irradiation causes a localized temperature increase and a localized mechanical strength decrease. In this article, an external mechanical force is added to a laser beam irradiation, which is called external force-assisted laser forming process, to gain a 90-degree bending angle. Furthermore, Numerical simulation of the process is performed to achieve a good understanding of the process. Simulation results show that more than two-third of the final forming is due to the laser beam irradiation. Equivalent plastic strain values during laser forming and external force-assisted laser forming processes are compared. Results show that equivalent plastic strain in laser forming process increases in a step pattern, with increasing in scan pass numbers. This occurs because when the laser beam irradiates on the sheet surface, it reduces the yield strength of the sheet. Equivalent plastic strain in external force-assisted laser forming process has an oscillatory step nature. This attributes to simultaneous effects of strain hardening and thermal induced reduction of yield strength of the sheet. Simulations were in good accordance with experiments.     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.     

Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

Exploring the role of emotional intelligence in behavior-based safety coaching

INTRODUCTION: Safety coaching is an applied behavior analysis technique that involves interpersonal interaction to understand and manipulate environmental conditions that are directing (i.e., antecedent to) and motivating (i.e., consequences of) safety-related behavior. A safety coach must be skilled in interacting with others so as to understand their perspectives, communicate a point clearly, and be persuasive with behavior-based feedback. METHOD: This article discusses the evidence-based "ability model" of emotional intelligence and its relevance to the interpersonal aspect of the safety coaching process. RESULTS: Emotional intelligence has potential for improving safety-related efforts and other aspects of individuals' work and personal lives. Safety researchers and practitioners are therefore encouraged to gain an understanding of emotional intelligence and conduct and support research applying this construct toward injury prevention.     

Traffic behaviour among adolescents using mopeds and light motorcycles

INTRODUCTION: Motorcycling is recognized to be a relatively risky activity. Powered two wheelers (PTW) are classified as mopeds, light, and heavy motorcycles, the first two categories being denoted light PTWs. This paper reviews the scientific literature on accident risks and traffic behavior among users of light PTWs with the aim of clarifying the current state of knowledge. METHOD: Based on a risk analytical and an anthropological perspective on motorcycling, the paper discusses the significance of cultural and social factors as important aspects of safety. More targeted and effective safety measures, for example better training programs, are needed to prevent motorcycle accidents. This means developing a deeper understanding of the rider as an individual, and the individuals within different groups and settings. Why and how motorcyclists approach the road, its function as a social arena, the varieties of goals and values, and the motorcyclists' own perceptions of the behavior that ensures their "achievements" or "successes", are some of the issues. Today, this kind of knowledge is scarce and almost entirely absent from the scientific literature. RESULTS: We conclude that the massive quantities of data on numbers of accidents, the categorization of situations, the causal explanations related to speed, gender, age, lack of concentration so forth, can only be employed as support for safety measures as long as they are linked to social and cultural factors. IMPACT ON INDUSTRY: Risk informed decision making has become an integral part of authorities' and manufacturers' implementation of safety measures. This tendency is strengthened by the fact that the responsibility of product safety rests upon the manufacturers, cf. for example EU safety regulations. Therefore it is paramount that a thorough understanding of social and cultural factors related to the PTW driving is necessary for the industry to develop targeted and efficient safety measures.