Dust exposures in tractor and combine operations in eastern Mediterranean, Turkey

The objective of this study was to determine the dust concentrations in selected tractor and combine operations in eastern Mediterranean region in Turkey Mean dust concentrations were 137.9 mg m(-3), 83.6 mg m(-3), 80.3 mg m(-3), and 88.8 mg m(-3) respectively for soil packing, furrowing, straw making, and baling on tractors with no cabins whereas 106.9 mg m(-3) was found in combines without cabins, which are much higher than the limit dust concentration (10 mg m(-3)) considered hazardous for workers' health. In tractor operations with field-installed cabins, mean dust concentrations were 5.6 mg m(-3), 6.6 mg m(-3), 6.4 mg m(-3), and 3.7 mg m(-3), respectively in soil packing, furrowing, straw making, and baling while 4.7 mg m(-3) was measured in combines with field-installed cabins. Considering unit-manufactured cabins, mean dust concentrations were 1.1 mg m(-3), 1.6 mg m(-3), 3.2 mg m(-3), and 1.4 mg m(-3) respectively in tractor operations, and 1.4 mg mr(-3) in combine operations. Variance analyses showed that not only the respiration environment of the workers but also the field operation had a significant effect on measured dust concentrations (p < 0.01). Pearson correlation coefficient was 0.74 (very strong level) between dust concentration and wind speed in soil packing, 0.46 (medium level) between dust concentration and wind speed in baling, and 0.44 (medium level) between dust concentration and ground speed in combining.     

An evaluation of olive-tree bark for the biological monitoring of airborne trace-elements at ground level

There is a need to start looking into the possibility of tree bark for biomonitoring. Bark from olive trees (Olea europaea Linn.) has been collected over an area in northwestern Portugal, featuring a blend of rural lands, industrial towns and coastal environments. Samples were analysed through INAA and PIXE for their elemental contents. Results from both techniques were reconciled and then compared with an extensive database on 46 trace elements in Parmelia spp. thalli from the same sites and mostly from the very bark substrates. Distribution-free, nonparametric statistics show that, despite signal magnitude, variation patterns of bark and lichen concentrations follow one another in a most significant way. Selected elements in bark also correlate to a superior extent. As far as this investigation goes, there is no reason whatsoever for discarding bark as an alternative to lower epiphytes.     

Gastroenteric Viruses Detection in a Drinking Water Distribution-to-Consumption System in a Low-Income Community in Rio de Janeiro

Food and Environmental Virology - The availability of drinking water is one of the main determinants of quality of life, disease prevention and the promotion of health. Viruses are important agents...     

Land cover classification with an expert system approach using Landsat ETM imagery: a case study of Trabzon

The main objective of this study is to generate a knowledge base which is composed of user-defined variables and included raster imagery, vector coverage, spatial models, external programs, and simple scalars and to develop an expert classification using Landsat 7 (ETM+) imagery for land cover classification in a part of Trabzon city. Expert systems allow for the integration of remote-sensed data with other sources of geo-referenced information such as land use data, spatial texture, and digital elevation model to obtain greater classification accuracy. Logical decision rules are used with the various datasets to assign class values for each pixel. Expert system is very suitable for the work of image interpretation as a powerful means of information integration. Landsat ETM data acquired in the year 2000 were initially classified into seven classes for land cover using a maximum likelihood decision rule. An expert system was constructed to perform post-classification sorting of the initial land cover classification using additional spatial datasets such as land use data. The overall accuracy of expert classification was 95.80%. Individual class accuracy ranged from 75% to 100% for each class.     

Bromate formation on the non-porous TiO2 photoanode in the photoelectrocatalytic system

The increasing use of ozone in water disinfection processes has been the focus of considerable concern in regards to inorganic disinfection by product formation of bromate in waters containing bromide. Due to the public health risk caused by the presence of bromate as a suspected carcinogen, attention had been addressed to the conditions under which bromate is formed. In this study, photoanodic bromine generation and bromate (BrO(3)(-)) formation were investigated using a TiO(2) electrode in a photoelectrocatalytic (PEC) treatment process. The separation of anodic and cathodic reactions in the PEC system resulted in a pH decrease from 9.3 to 3.0 in the photoanode compartment and an increase to 11.0 in the cathode compartment. Under a photo-illumination intensity of 5.7 m W cm(-2) UV, a biasing potential of +1.0V vs SCE, a pH of 6.0 and at a NaBr concentration of 1.0 x 10(-2) M, active bromine formation increased over time with 2.4 x 10(-6) M min(-6) rate and reached a steady-state concentration of 1.44 x 10(-4) M in 60 min. Bromate formation was detected after a lag-period of 15 min and exhibited a continuous increasing trend with respect to irradiation time. No bromate formation was observed below pH 6.5 whereas an increasing bromate concentrations and pH up to pH=8.5 were noted.     

Ecodesign of automotive components making use of natural jute fiber composites

Nowadays, the world faces unprecedented challenges in social, environmental and economical dimensions, in which the industrial design has showed an important contribution with solutions that provide positive answers regarding these problems. In particular, due to its relevance, the automotive industry confronts a moment of crises, and based on the ecodesign of products it has been transforming the challenges in opportunities. In this context, the use of natural fiber composites, produced in developing countries, have presented several social, environmental and economical advantages to design “green” automotive components. Thus, this work through LCA method demonstrates the possibility to use natural fibers through a case study design which investigates the environmental improvements related to the replacement of glass fibers for natural jute fibers, to produce a structural frontal bonnet of an off-road vehicle (Buggy). Results pointed out the advantages of applying jute fiber composites in Buggy enclosures.     

Modelling feeding flow related shrinkage defects in aluminum castings

The process modelling of shape casting is geometrically complex and computationally very challenging. Besides the three-dimensional complex shapes with multiple domains, the defects of interest to industry arise as a consequence of the interaction amongst a range of phenomena. Conventionally, the key phenomena and defect prediction are modelled through empirical relations applied to the simulation results. Such approaches are neither comprehensive nor reliable. This paper presents a 3-D model that is capable of predicting the formation of shrinkage defects explicitly as a function of the interacting continuum phenomena, i.e. free surface flow, heat transfer, and solidification, in complex three-dimensional geometries which allows to identify the distinction between surface depression, surface connected cavities and internal cavities.The model solves the coupled macroscopic conservation equations for mass, momentum, and energy with a phase change during solidification. In the model, the volume deficit due to solidification can either be compensated by depression of the outside surface or by creating a cavity that initiates either on the surface or in the interior of the casting. The solidification morphology is taken into account by using a parameter, which depends on the fraction solid, in the momentum equation. By using an adapted free surface algorithm, it is suitable to predict surface connected defects: depressed surfaces and caved surfaces. A critical pressure serves as a criterion to open internal shrinkage cavities. The model does not need to search for connected zones to feed shrinkage, but the shrinkage distribution will automatically emerge from the continuity equation.This advanced shrinkage model has experimentally been validated successfully using two Al-Si alloys, a skin freezing eutectic alloy and a mushy freezing hypo-eutectic alloy.     

Synthesis of grafted natural pozzolan with 3-aminopropyltriethoxysilane: preparation,characterization, and application for removal of Brilliant Green 1 and Reactive Black 5 from aqueous solutions

Environmental Science and Pollution Research - Natural pozzolan is an amorphous silicate-based material of volcanic origin. In this work, the natural pozzolan was modified by using...     

Effects of land-use changes on landslides in a landslide-prone area (Ardesen, Rize, NE Turkey)

Various natural hazards such as landslides, avalanches, floods and debris flows can result in enormous property damages and human casualties in Eastern Black Sea region of Turkey. Mountainous topographic character and high frequency of heavy rain are the main factors for landslide occurrence in Ardesen, Rize. For this reason, the main target of the present study is to evaluate the landslide hazards using a sequence of historical aerial photographs in Ardesen (Rize), Turkey, by Photogrammetry and Geographical Information System (GIS). Landslide locations in the study area were identified by interpretation of aerial photographs dated in 1973 and 2002, and by field surveys. In the study, the selected factors conditioning landslides are lithology, slope gradient, slope aspect, vegetation cover, land class, climate, rainfall and proximity to roads. These factors were considered as effective on the occurrence of landslides. The areas under landslide threat were analyzed and mapped considering the landslide conditioning factors. Some of the conditioning factors were investigated and estimated by employing visual interpretation of aerial photos and topographic data. The results showed that the slope, lithology, terrain roughness, proximity to roads, and the cover type played important roles on landslide occurrence. The results also showed that degree of landslides was affected by the number of houses constructed in the region. As a consequence, the method employed in the study provides important benefits for landslide hazard mitigation efforts, because a combination of both photogrammetric techniques and GIS is presented.