Metal levels in sediments from the Minho estuary salt marsh: a metal clean area?

Total-recoverable metals (Al, Cr, Cu, Fe, Mn, Ni, Pb and Zn) in sediments from Minho estuary salt marsh were determined to evaluate possible increase in anthropogenic contamination by metals and to evaluate the possibility of this area to be considered a pristine area in terms of metals, which can be used as a reference site for other metal-contaminated national and international estuaries/salt marshes. This study revealed that the spatial distribution of metals in the salt marsh sediments was not homogeneous and that two sampling sites (sites 5 and 7) had indications of anthropogenic contamination. However, metal levels in these salt marsh sediments were lower than those observed in the wetlands of the main Portuguese estuaries. Comparison with Portuguese and international reference values used in the evaluation of the ecological quality of sediments, indicated that the sediments can be classified as “clean sediment” and that metal levels were lower or similar (only for Cu and Ni) to the values of ERL, which are the values that define the concentrations ranges that are rarely associated to adverse biologic effects in organisms. In addition, metal levels in the sediments were in chemical forms that were not easily available to organisms, indicating that these sediments probably will not have negative influences in the organisms living in the salt marsh, although no life-form ecological safety tests have been carried out. Therefore, the Minho estuary salt marsh area can probably be considered a pristine area in terms of metals and can be used as a reference for other metal-contaminated estuaries/salt marshes.     

Median lethal concentration of formaldehyde and its genotoxic potential in bullfrog tadpoles (Lithobates catesbeianus)

In order to avoid that contaminated frog farms animals escaping in the environment and become potential vector of emergent diseases, studies with disinfection protocol are strictly necessary. The formaldehyde is one of the compounds tested in fungal disinfection protocols and also used in aquaculture. This study aimed to determine the median lethal concentration (LC_50–96h) of formaldehyde in bullfrog tadpoles and to evaluate the possible genotoxic effects in acute exposition. Accordingly, the animals were exposed to formaldehyde in the concentrations of 6, 9, 12, 15, and 18 mg L^?1, and after 96 h blood samples were drawn for the micronucleus (MN) test. The LC_50–96h was 10.53 mg L^?1, and the MN frequency increased in proportion to the formaldehyde concentrations, with an estimated frequency in the negative control being 1.35 MN/individual. We concluded that formaldehyde is genotoxic to tadpoles of bullfrogs in the tested concentrations, and the choice of this chemical should be contemplated before its use in animals in captivity.     

Uptake,translocation, and control of trumpet flower (Tecoma stans) with aminocyclopyrachlor

To gain a better understanding of the physiology of the herbicide aminocyclopyrachlor in young plants of trumpet flower, the uptake and translocation were evaluated after the application of herbicide. This was determined by treating individual leaves with formulated herbicides plus ¹⁴C-aminocyclopyrachlor after the application of the formulated herbicide. This experiment used a randomized experimental design with three replications. In addition, field studies were conducted to assess the effectiveness of foliar applications of aminocyclopyrachlor in association with metsulfuton-methyl. The plant absorbed 20% of the herbicide applied. The translocation percentage did not surpass 5% of the total amount applied. Only 1% of the herbicide applied was translocated to the roots. Rate of 40 + 13 g a.i. 100 L^?1 of aminocyclopyrachlor+metsulfuron-methyl was effective to control T. stans.     

Assessing the diurnal variability of pharmaceutical and personal care products in a full-scale activated sludge plant

An intensive sampling campaign has been carried out in a municipal wastewater treatment plant (WWTP) to assess the dynamics of the influent pharmaceutical active compounds (PhAC) and musks. The mass loadings of these compounds in wastewater influents displayed contrasting diurnal variations depending on the compound. The musks and some groups of PhACs tended to follow a similar diurnal trend as compared to macropollutants, while the majority of PhACs followed either the opposite trend or no repeatable trend. The total musk loading to the WWTP was 0.74 ± 0.25 g d⁻¹, whereas the total PhAC mass loading was 84.7 ± 63.8 g d⁻¹. Unlike the PhACs, the musks displayed a high repeatability from one sampling day to the next. The range of PhAC loadings in the influent to WWTPs can vary several orders of magnitude from one day or week to the next, representing a challenge in obtaining data for steady-state modelling purposes.     

Seasonal variation of organochlorine contaminants in bonito (Sarda sarda L. 1758) and anchovy (Engraulis encrasicolus L. 1758) in Black Sea region, Turkey

The concentrations of indicator polychlorinated biphenyls (PCBs) and organochlorine insecticides were determined in bonito (Sardasarda L. 1758) and anchovy (Engraulisencrasicolus L. 1758) from the Black Sea, Turkey. Concentrations of total indicator PCBs ranged between <1-17.0 in bonito, and <1-17.5 ng/g fresh weight in anchovy, and total of 1,1,1-trichloro-2,2-bis-chlorophenyl-ethane and its metabolites’ (DDTs) concentrations ranged between 13.4-26.3, and 2.96-19.0 ng/g fresh weight in bonito and anchovy respectively. PCB 52, p,p′-DDE and endosulfan (α + β) were found dominant in both of the fish species. Except endosulfan, and some DDT metabolites, none of the studied organochlorine pesticides was detected in the fish samples. Concentrations of PCBs in anchovy were found higher than those in bonito, whereas DDT and endosulfan concentrations were found similar in both of the fish species. All of the fish samples had residue concentrations below the maximum residue limits (MRL) recommended by FAO/WHO Codex Alimentarius Commission.     

Photocatalytic and photoelectrocatalytic humic acid removal and selectivity of TiO(2) coated photoanode

In this study, photocatalytic (PC) and photoelectrocatalytic (PEC) treatment methods were comparatively investigated as a possible means of removing humic acid (HA) following absorbance at 254nm (UV(254)) and total organic carbon (TOC) analysis. The enhanced HA degradation rates were obtained in the PEC system over the conventional PC process under acidic, neutral and alkaline conditions. Preliminary and binary experiments were performed to determine the selectivity of the photoanode in terms of HA and chloride oxidation. TOC, chlorine and photocurrent parameters proved that HA was selectively removed before chlorine generation. The inhibitory effect of carbonate ions on the performance of photoanode was also studied under different pH values.     

Energy conservation and CO2 emission reductions due to recycling in Brazil

The present paper aims to make the energy saving potential provided by waste recycling in Brazil evident by pointing out more specifically the benefits regarding climate change mitigation. In this case, based on the energy saved due to the recycling process of an exogenous amount of waste, we have built two scenarios in order to show the potential for indirectly avoiding CO2 emissions in the country as a result of the recycling process. According to the scenario, 1 Mt and 3.5 Mt of CO2, respectively, would be avoided per year due to solid waste recycling. The international context for greenhouse gas emissions reduction, such as the United Nations Framework Convention on Climate Change and its Kyoto Protocol has been taken into account.     

Hg transfer from contaminated soils to plants and animals

Understanding the transfer of mercury (Hg) from soil to crops is crucial due to Hg toxicity and Hg occurrence in terrestrial systems. Previous research has shown that available Hg in soils contributes to plant Hg levels. Plant Hg concentrations are related to soil conditions and plant characteristics. Mechanistic models describing such soil–plant interactions are however difficult to quantify. Here we performed a field study in agricultural, mining and industrial areas in Portugal to evaluate potential food chain risks. The uptake of Hg by Italian ryegrass, ryegrass, orchard grass, collard greens and rye was measured to calculate daily intakes (DI) of Hg for cows and sheep grazing. A total of 136 soil samples and 129 plant samples were analysed. Results show that total Hg concentrations ranged from 0.01 to 98 mg kg⁻¹ in soils; 0.01–5.4 mg kg⁻¹ in shoots and 0.01–42 mg kg⁻¹ in roots. Calculated DI ranged from 0.18 to 132 mg d⁻¹ for cows, and from 0.028 to 23 mg d⁻¹ for sheep. In 27 grassland sites, daily intakes exceeded the acceptable daily intake of both cows and sheep in view of food safety considering Hg in animal kidneys evidencing potential risks to human health. The transfer of Hg from soil to crops was described using empirical Freundlich-type functions. For ryegrass, orchard grass and collard greens, the soil-to-root or soil-to-shoot transfer of Hg appeared to be controlled by the total soil Hg concentration and levels of Al_ox and Fe_ox. Empirical functions allowed us to obtain realistic estimates of Hg levels in crops and can be used as an alternative to mechanistic models when evaluating food chain risks of Hg contamination in agricultural soils.