Cross-border response of mosses to heavy metal atmospheric deposition in Southeastern Bulgaria and European Turkey

First cross-border atmospheric pollution of 11 heavy metals and toxic elements assessed by Hypnum cupressiforme was reported for a part of Southeastern Europe (Southeastern Bulgaria and European Turkey). Moss monitoring technique followed the main requirements of European Moss Survey. Moss samples were collected in April 2006 both in Bulgaria and Turkey. Concentration of Al, As, Cd, Cr, Cu, Fe, Ni, Pb, Sb, V, and Zn were determined by ICP-AES. Interlaboratory parallel calibration (exchanged four moss samples from each country), standard reference moss materials (M2 and M3) results ensured the study. ANOVA showed no differences between measured results in both laboratories at the 99% confidence level. Principle Component Analyze proved two factors: F1 group of Al, As, Cd, Cr, Fe, Ni, and V and F2 of Cu, Pb, and Zn as main atmospheric pollutants. Results obtained showed approximately Cu and Pb high concentrations around Istanbul and Burgas and Zn pollution in Istanbul district. Arsenic cross-border atmospheric pollution in the study area of Southeastern Europe was found.     

A comprehensive method for aeolian particle granulometry and micromorphology analyses

The aim of this study was to use a new approach to investigate aeolian particle granulometry and micromorphology. Taking total aeolian deposition into account, we used parameters such as, particle area, perimeter, shape analysis for particle roughness (area/perimeter) and elongation (long/short axis). These parameters were analyzed on temporal and spatial scales at four study sites in the eastern Negev Desert, Israel. The total collection of particles was sorted into three size groups based on particle area to facilitate comparison. The classic definition of particle size (equating particle length with particle diameter) produced relatively small variations among the three size classes (25-38.6%). Our proposed comprehensive method demonstrated significant variation among the three size classes (13.9-60.8%), e.g. the classic method placed 36.4% of the particles in size class two while the new method placed 60.8% of the particles in this size class; the differences were even more significant regarding size class 3 (38.6% vs. 13.9%, respectively). The classic method did not facilitate investigation of particle roughness and elongation. With this new approach, it was possible to clearly define the particles by size class, based on these characteristics. With roughness, the variation among size classes 2 and 3 was about 27%. With elongation, the variation among size classes two and three was about 21%. Applying similar investigation method to study the aeolian particle granulometry and micromorphology can better facilitate more detailed calculation of particle size distribution, roughness and elongation.     

Impacts of groundwater metal loads from bedrock fractures on water quality of a mountain stream

Acid mine drainage and metal loads from hardrock mines to surface waters is a significant problem in the western USA and many parts of the world. Mines often occur in mountain environments with fractured bedrock aquifers that serve as pathways for metals transport to streams. This study evaluates impacts from current and potential future groundwater metal (Cd, Cu, and Zn) loads from fractures underlying the Gilt Edge Mine, South Dakota, on concentrations in Strawberry Creek using existing flow and water quality data and simple mixing/dilution mass balance models. Results showed that metal loads from bedrock fractures to the creek currently contribute <1% of total loads. Even if background water quality is achieved upstream in Strawberry Creek, fracture metal loads would be <5%. Fracture loads could increase substantially and cause stream water quality standards exceedances once groundwater with elevated metals concentrations in the aquifer matrix migrates to the fractures and discharges to the stream. Potential future metal loads from an upstream fracture would contribute a small proportion of the total load relative to current loads in the stream. Cd has the highest stream concentrations relative to standards. Even if all stream water was treated to remove 90% of the Cd, the standard would still not be achieved. At a fracture farther downstream, the Cd standard can only be met if the upstream water is treated achieving a 90% reduction in Cd concentrations and the median stream flow is maintained.     

Environmental contaminants in freshwater fish and their risk to piscivorous wildlife based on a national monitoring program

Organochlorine chemical residues and elemental concentrations were measured in piscivorous and benthivorous fish at 111 sites from large U.S. river basins. Potential contaminant sources such as urban and agricultural runoff, industrial discharges, mine drainage, and irrigation varied among the sampling sites. Our objectives were to provide summary statistics for chemical contaminants and to determine if contaminant concentrations in the fish were a risk to wildlife that forage at these sites. Concentrations of dieldrin, total DDT, total PCBs, toxaphene, TCDD-EQ, cadmium, chromium, mercury, lead, selenium, and zinc exceeded toxicity thresholds to protect fish and piscivorous wildlife in samples from at least one site; most exceedences were for total PCBs, mercury, and zinc. Chemical concentrations in fish from the Mississippi River Basin exceeded the greatest number of toxicity thresholds. Screening level wildlife risk analysis models were developed for bald eagle and mink using no adverse effect levels (NOAELs), which were derived from adult dietary exposure or tissue concentration studies and based primarily on reproductive endpoints. No effect hazard concentrations (NEHC) were calculated by comparing the NOAEL to the food ingestion rate (dietary-based NOAEL) or biomagnification factor (tissue-based NOAEL) of each receptor. Piscivorous wildlife may be at risk from a contaminant if the measured concentration in fish exceeds the NEHC. Concentrations of most organochlorine residues and elemental contaminants represented no to low risk to bald eagle and mink at most sites. The risk associated with pentachloroanisole, aldrin, Dacthal, methoxychlor, mirex, and toxaphene was unknown because NOAELs for these contaminants were not available for bald eagle or mink. Risk differed among modeled species and sites. Our screening level analysis indicates that the greatest risk to piscivorous wildlife was from total DDT, total PCBs, TCDD-EQ, mercury, and selenium. Bald eagles were at greater risk to total DDT and total PCBs than mink, whereas risks of TCDD-EQ, mercury, and selenium were greater to mink than bald eagle.     

Utilization of statistics based classification approach to investigate water supply profile of Turkey

In the paper water supply profile of Turkey was examined. In this scope, the questionnaire survey conducted by Turkish Statistical Institute in 2004 to investigate annual amount of water abstracted to drinking water networks by type of resources in 81 provinces was evaluated. In the questionnaire, sources were grouped under five categories as spring, (artificial) lake, river, reservoir and well. Due to the complex and multivariate characteristics of the data sets, to replace a large collection of variables with a smaller number of factors the statistical method "factor analysis" was performed. Results revealed that, water supply systems in the country were mainly governed by groundwater sources (well and/or spring). However, in the northeastern part of the country, rivers were allocated for drinking water supply. On the other hand, reservoir dependent cities were densely located in Marmara, Central Anatolia and Southeast Anatolia Regions. This study showed that statistics based classification methods assist decision makers to extract information from multidimensional complex data sets representing environmental conditions.     

Effect of diel period and season on seining effort required to detect changes in Lake Erie beach fish assemblages

Using beach seining data from Lake Erie beaches, we examined the effect of diel period and season on two common study objectives considered sensitive to sampling effort: (1) has fish assemblage composition changed between two sampling time periods?, and (2) how many samples are necessary to provide a representative sample of the fish assemblage? Across a range of effect sizes and power levels, sample sizes were estimated for species richness, total fish abundance, round goby (Neogobius melanostomus) abundance and emerald shiner (Notropis atherinoides) abundance. For most sampling periods and effect sizes, several hundred to several thousand seine hauls were estimated to be required for detecting large-scale (e.g. basin-wide) changes in round goby and emerald shiner abundance. Depending on the indicator of interest, night seining (either spring or fall) was interpreted as the most efficient approach. For both seasons, sampling effort beyond 40 to 50 night seine hauls results in few additional species being detected. Both species accumulation curves and estimated sample sizes indicate that less effort is required to detect species richness changes than fish abundance. For most effect sizes and power levels, estimates of the number of seine hauls required to detect changes in fish abundance are unrealistically large for most monitoring programs. More practical monitoring strategies could be achieved by adopting alternative indicators (e.g. guilds), a more liberal significance level (p=0.1), a paired-site sampling design, or including reference sites.     

Spatiotemporal changes of landscape pattern in response to deforestation in Northeastern Turkey: a case study in Rize

Recognition and understanding of landscape dynamics as a historical legacy of disturbances are necessary for sustainable management of forest ecosystems. This study analyzes spatial and temporal changes in land use and forest cover patterns in a typical mountain forest area in Rize Forest Enterprise of the Northeastern part of Turkey. The area is investigated by evaluated the temporal changes of spatial structure of forest conditions through spatial analysis of forest cover type maps from 1984 and 2007 using GIS and FRAGSTATS. The quantative evidences presented here showed that there were drastic changes in the temporal and spatial dynamics of land use/forest cover. As an overall change between 1984 and 2007, there was a net decrease of 2.30% in total forested areas. On one hand, productive forest areas decreased 12,506 ha, on the other hand, degraded forest areas increased 14,805 ha. In examining the changes of crown closure and development stages of forest ecosystem during the study period, the forest stand area with medium crown closures increased. Regenerated area increased while the other development stages were left to grow to mature development stages in the period. These results regarding to crown closure and development stage showed that forest quality has increased but total forest areas decreased. This is partially due to out-migration of rural population in Rize and Cayeli towns. In terms of spatial configuration, analysis of the metrics revealed that landscape structure in Study area had changed substantially over the 23-year study period, resulting in fragmentation of the landscape as indicated by the large patch numbers and the smaller mean patch sizes due to heavy timber subtraction, illegal cutting, and uncontrolled stand treatments.     

What do qualitative rapid assessment collections of macroinvertebrates represent? A comparison with extensive quantitative sampling

It is a fundamental tenet of Rapid Biological Assessments (RBA) that the samples collected reflect the community from which they are drawn. As with any biological sampling, RBA collections are subject to sampling error resulting in the omission of some taxa. The aim of this study is to compare the composition of RBA samples with an estimate of community structure based on extensive quantitative sampling. We used logistic regression to explore the relationships between the frequency of a taxon being collected in an RBA sample and its biological and ecological traits, namely its abundance, distribution, body size and habit. RBA samples and quantitative estimates of community structure were made in riffles in the Kangaroo and Nepean Rivers, New South Wales, Australia. Single RBA samples may collect up to 63% of the taxa that are collected by extensive quantitative sampling at a site. The frequency of a taxon being recorded in an RBA sample was significantly and positively related to all traits tested indicating a bias in the collection methods towards large, abundant and widely distributed taxa. Accordingly, taxa missed by RBA sampling were generally small, narrowly distributed or rare. These findings enhance our understanding of what RBA samples represent, and the bias and source of errors associated with RBA sampling. This study also quantifies the utility of RBA methods for biodiversity assessment.     

An appraisal of changes in seasonal water quality during passage through a shallow reservoir in Western Poland

Following restoration changes in Antoninek Reservoir physico-chemical and biological processes in the water column and bottom sediments were measured to outline mechanisms of changes in nitrogen, phosphorus and organic matter concentrations during water flow through this reservoir. Intensive mineralisation of organic matter in the shallow sediments stimulated primary production and influenced increasing ammonia and nitrite nitrogen concentrations. Two main factors affected concentrations of phosphorus: (1) its presence in the external loads of river waters entering the reservoir, more important in the colder seasons as the water discharge was higher and (2) from the internal loads coming from bottom sediments. The quality of the river water during its flow through this reservoir improved for most parameters and seasons. However, concentrations of nutrients were still high in waters flowing out from the reservoir and in some months they were higher in the outflow than in waters entering the reservoir.     

The impact of the tunnel exhausts in terms of heavy metals to the surrounding ecosystem

Samples of soil, plants, and lichens were analysed for heavy metal content (Cd, Cr, Cu, Ni, Pb, and Zn) in relation to different distances from the tunnel ventilation systems in order to evaluate the environmental pollution caused by car exhausts pollution from the Tauerntunnel and the Katschbergtunnel (Austria). Results show that the extent of heavy metal pollution is related to the type of tunnel ventilation system. The vertical ventilation system which ends in an exhaust air tower in the alpine pasture of Mosermandl 1,900 m above sea level contaminates soils and plants up to a distance of 750 m from the exhaust source. The dispersion of metals in front of the horizontal ventilation systems, which are located next to the tunnel portals, exhibits a rapid decrease with distance. Lichen transplants placed in front of the horizontal ventilation systems show very high metal accumulation, which gradually declines with the distance from the emitter source, therefore the lichen species Pseudevernia furfuracea can be used as a very efficient biomonitor for monitoring heavy metal pollution caused by tunnel exhausts over time. Data from former years (1986, 1988, 1990 and 1992) and from this present research suggest that the contamination of heavy metals at Mosermandl has decreased slightly in soil samples, except for Cu, but increased in plant samples, whereas a significant increase of Pb was observed.