Mercury removal using ground and calcined mussel shell

We determined mercury retention on calcined and ground mussel shell, in presence and absence of phosphate, using batch and stirred flow chamber experiments. In batch experiments the calcined shell exhibited higher Hg adsorption, with good fitting to Freundlich equation （R^2： 0.925-0.978）; the presence of phosphate increased Hg adsorption; mercury desorption was 13% or lower, diminishing up to 2% under the presence of phosphates. In stirred flow chamber experiments calcined shell retained more Hg than ground shells （6300 vs. 4000-5200 μmol/kg）; Hg retention increased an additional 40% on calcined shell and up to an additional 70% on ground shells when phosphates were present; mercury desorption was quite similar in all shell types （20%-34%）, increasing up to 49%-60% in ground shells when phosphates were present. The higher Hg adsorption on calcined shell would be related to its calcite and dolomite concentrations; mercury-phosphate interactions would cause the increase in Hg retention when phosphates are present. Data on Hg desorption suggest that Hg retention was not easily reversible after batch experiments, increasing in the stirred flow chamber due to convective flow. Calcined and ground mussel shells could be recycled removing Hg from water, with the presence of phosphates in solution improving efficacy.     

Survival of Respiratory Viruses on Fresh Produce

In addition to enteric viruses of fecal origin, emerging zoonotic viruses such as respiratory coronaviruses and influenza viruses may potentially be transmitted via contaminated foods. The goal of this study was to determine the recovery efficiencies and the survival of two respiratory viruses, namely, adenovirus 2 (Ad2) and coronavirus 229E (CoV229E), on fresh produce in comparison to the enteric poliovirus 1 (PV1). Adenovirus was recovered with efficiencies of 56.5, 31.8, and 34.8 % from lettuce, strawberries, and raspberries, respectively. Coronavirus was recovered from lettuce with an efficiency of 19.6 % yet could not be recovered from strawberries. Poliovirus was recovered with efficiencies of 76.7 % from lettuce, but only 0.06 % from strawberries. For comparison purposes, the survival of Ad2, CoV229E, and PV1 was determined for periods up to 10 days on produce. The enteric PV1 survived better than both respiratory viruses on lettuce and strawberries, with only ≤1.03 log₁₀ reductions after 10 days of storage at 4 °C compared to CoV229E not being recovered after 4 days on lettuce and reductions of 1.97 log₁₀ and 2.38 log₁₀ of Ad2 on lettuce and strawberries, respectively, after 10 days. Nevertheless, these respiratory viruses were able to survive for at least several days on produce. There is therefore the potential for transfer to the hands and subsequently to the mucosa via rubbing the eyes or nose. In addition, some respiratory coronaviruses (e.g., severe acute respiratory syndrome coronavirus) and adenoviruses are also capable of replication in the gut and there is thus some potential for acquisition through the consumption of contaminated produce.     

Street floods in Metro Manila and possible solutions

Urban floods from thunderstorms cause severe problems in Metro Manila due to road traffic. Using Light Detection and Ranging (LiDAR)-derived topography, flood simulations and anecdotal reports, the root of surface flood problems in Metro Manila is identified. Majority of flood-prone areas are along the intersection of creeks and streets located in topographic lows. When creeks overflow or when rapidly accumulated street flood does not drain fast enough to the nearest stream channel, the intersecting road also gets flooded. Possible solutions include the elevation of roads or construction of well-designed drainage structures leading to the creeks. Proposed solutions to the flood problem of Metro Manila may avoid paralyzing traffic problems due to short-lived rain events, which according to Japan International Cooperation Agency (JICA) cost the Philippine economy 2.4 billion pesos/day.     

Total organic halogen (TOX) in human urine: A halogen-specific method for human exposure studies

Disinfection by-products(DBPs) are a complex mixture of compounds unintentionally formed as a result of disinfection processes used to treat drinking water. Effects of long-term exposure to DBPs are mostly unknown and were the subject of recent epidemiological studies. However,most bioanalytical methods focus on a select few DBPs. In this study, a new comprehensive bioanalytical method has been developed that can quantify mixtures of organic halogenated compounds, including DBPs, in human urine as total organic chlorine(TOCl), total organic bromine(TOBr), and total organic iodine(TOI). The optimized method consists of urine dilution, adsorption to activated carbon, pyrolysis of activated carbon, absorption of gases in an aqueous solution, and halide analysis with ion chromatography and inductively coupled plasma-mass spectrometry. Spike recoveries for TOCl, TOBr, and TOI measurements ranged between 78% and 99%. Average TOCl, TOBr, and TOI concentrations in five urine samples from volunteers who consumed tap water were 1850, 82, and 21.0 μg/L as X~-, respectively.Volunteers who consumed spring water(control) had TOCl, TOBr, and TOI average concentrations in urine of 1090, 88, and 10.3 μg/L as X~-, respectively. TOCl and TOI in the urine samples from tap water consumers were higher than the control. However, TOBr was slightly lower in tap water urine samples compared to mineral water urine samples, indicating other sources of environmental exposure other than drinking water. A larger sample population that consumes tap water from different cities and mineral water is needed to determine TOCl, TOBr, and TOI exposure from drinking water.     

Photodegradation of atrazine and ametryn with visible light using water soluble porphyrins as sensitizers

The photodegradation of the herbicides atrazine and ametryn with visible light in aerated neutral aqueous solutions and 5, 10, 15, 20-tetrakis (2,6-dichloro-3-sulfophenyl) porphyrin or 5, 10, 15, 20-tetrakis (4-sulfophenyl) porphyrin as sensitizers are reported for the first time. Our findings show that the degradation percentage reached 30% for atrazine and 63% for ametryn. The final photoproducts were characterized as dealkylated s-triazines. Photolysis of the pesticides in the presence of a singlet oxygen quencher showed only a minor contribution of this type of mechanism, while a bimolecular quenching reaction between the triplet state of the sensitizer and the pesticides is excluded by flash photolysis studies. It is proposed that the mechanism may involve the formation of a superoxide radical anion from the triplet state of the sensitizer and molecular oxygen, followed by a radical decomposition pathway. Selected article from 1st International Meeting on Photochemistry, Photocatalysis and Environmental Applications, Agadir, 2006, organised by Prof. Dr. Ait Ichou, University Ibn Zohr, Agadir, Morocco     

Terrestrial avoidance behaviour tests as screening tool to assess soil contamination

To assess soil quality and risk assessment, bioassays can be useful tools to gauge the potential toxicity of contaminants focusing on their bioavailable fraction. A rapid and sublethal avoidance behaviour test was used as a screening tool with the earthworm Eisenia andrei and the isopod Porcellionides pruinosus, where organisms were exposed during 48 h to several chemicals (lindane, dimethoate and copper sulphate, for isopods and carbendazim, benomyl, dimethoate and copper sulphate for earthworms). Both species were also exposed to soils from an abandoned mine. For all bioassays a statistical approach was used to derive EC50 values. Isopods and earthworms were able to perceive the presence of toxic compounds and escaping from contaminated to clean soil. Furthermore the behaviour parameter was equally or more sensitive then other sublethal parameters (e.g. reproduction or growth), expressing the advantages of Avoidance Behaviour Tests as screening tools in ERA.     

Single-cell sequencing and mini-sequencing for preimplantation genetic diagnosis

There is increasing interest in the use of preimplantation genetic diagnosis (PGD) as an alternative to routine prenatal diagnosis. However, the costs associated with development and testing of new PGD protocols have forced some PGD centres to limit the number of diseases for which PGD is offered. One of the main factors in the design of new protocols, which affects cost and accuracy, is the choice of the mutation-detection technique. We have assessed the reliability of DNA sequencing and mini-sequencing for clinical diagnosis at the single-cell level and have found them to be rapid and accurate. Extensive optimisation for individual mutations is not usually necessary when employing these versatile techniques and consequently a smaller investment of time and resources should be required during development of new protocols. Additionally, we report single-cell protocols for the diagnoses of cystic fibrosis, sickle cell anaemia and β-thalassaemia, which utilise mini-sequencing. Unlike most mutation-detection techniques, mini-sequencing permits analysis of very small DNA fragments. Small amplicons experience low allele dropout (ADO) rates, and consequently this approach could potentially improve the reliability of PGD. Copyright © 2003 John Wiley & Sons, Ltd.     

How to evaluate models: Observed vs. predicted or predicted vs. observed?

A common and simple approach to evaluate models is to regress predicted vs. observed values (or vice versa) and compare slope and intercept parameters against the 1:1 line. However, based on a review of the literature it seems to be no consensus on which variable (predicted or observed) should be placed in each axis. Although some researchers think that it is identical, probably because r² is the same for both regressions, the intercept and the slope of each regression differ and, in turn, may change the result of the model evaluation. We present mathematical evidence showing that the regression of predicted (in the y-axis) vs. observed data (in the x-axis) (PO) to evaluate models is incorrect and should lead to an erroneous estimate of the slope and intercept. In other words, a spurious effect is added to the regression parameters when regressing PO values and comparing them against the 1:1 line. Observed (in the y-axis) vs. predicted (in the x-axis) (OP) regressions should be used instead. We also show in an example from the literature that both approaches produce significantly different results that may change the conclusions of the model evaluation.     

Design and first experimental results of a bubbling fluidized bed for air gasification of plastic waste

Plastic wastes have an especially high potential for use as alternative fuels, considering their high heating value and their large and stable availability. They could be used in electricity production based on gasification technologies, wherein electricity is produced in engines by means of the conversion of plastic wastes into a valuable gas. However, there are still some technical barriers to overcome before this technology can access the commercial stage, and further scientific research is needed to gain deeper understanding of the process and to be able to control and optimize it. This research presents the design and first experimental results of a bubbling fluidized bed gasifier conceived for the gasification of actual plastic residues. The experimental tests revealed that the selection and design of the reactor were adequate and proved some of the advantages of using plastic as a fuel, related in part to the absence of ashes and char. A valuable syngas over 5 MJ/m³ was generated, which contained a considerable fraction of methane as well as hydrogen and carbon monoxide as main combustible gases. The highest efficiency was achieved when the equivalence ratio was increased to 0.35, reaching 61 % in terms of cold gas efficiency and 66 % carbon conversion.     

Hydroreforming over Ni/H-beta of the thermal cracking products of LDPE, HDPE and PP for fuel production

The thermal cracking at 400?°C of pure polyolefins—low density polyethylene (LDPE), high density polyethylene (HDPE) and polypropylene (PP) and a standard polyolefin mixture (46?% LDPE?+?27?% HDPE?+?28?% PP)—was studied together with the catalytic hydroreforming of the obtained oils over Ni/h-beta at 310?°C under 20?bar of hydrogen. The oils obtained after the thermal cracking of PP contain the highest amount of gasoline (58?%), while those coming from HDPE the lowest (39?%). The bromine index of the oils was very high, ranging from 54.1 (LDPE) to 83.8 (PP), indicating a high olefinic content of the oils. Additionally, the thermal cracking of the mixture indicates the occurrence of a synergestic effect among plastics, with transfer of methyl groups from PP to polyethylenes. Ni/h-beta (Si/Al?=?25; Ni content?=?6.2?wt%) catalyst was used in the hydroreforming since it contains a bimodal pore size distribution (0.6/3.1?nm), which improves accessibility of the oil molecules to the catalytic sites. After the hydroreforming and regardless of the plastics used, the share of lighter products (gasoline and gases) increases, reaching a remarkable 68?% of gasolines with the oils coming from PP. Regardless of the starting feed, the amount of useful fuels (gasoline?+?light diesel) was within 80–85?%. Additionally, the oils were successfully hydrogenated since the bromine indexes dropped below 7, indicating that more than 90?% of the starting olefins were saturated. The usage of catalysts increased the amount of aromatics in the obtained oils within 13–20?%, depending on the starting plastic. Likewise, the isoparaffin content of the gasolines was within 35–40?%, except for PP, where it was enhanced to 62?%. However, the research octane number (RON) of the gasolines from LDPE and PP and the cetane indexes of the diesel from all the plastics were promising for their application as fuels.