An equal sex ratio followed by differential sex mortality causes overestimation of females in gall midges: no evidence for sex ratio regulation

Monogeny, the production of unisexual broods by individual females, has been recognized for nearly 80?years. The genetic nature of gall midges' sex determination predicts an equal numbers of male-producing and female-producing females in the populations such that the overall sex ratio is expected to be nearly 1:1. However, observations of some strictly monogenous populations with biased sex ratio, mainly toward females, have raised the question of whether gall midges are able to adjust their offspring sex ratio in response to changes in environmental conditions, and some authors have even considered sex ratio regulation as a strong force in the course of the evolution of monogeny. In this paper, first, by studying the sex ratio variations of the predatory gall midge, Aphidoletes aphidimyza within a generation, we showed that adult males emerge up to 1?day earlier and have shorter life span than females (less than 4?days and up to 6?days, respectively). Although, the sex ratio of A. aphidimyza at the time of emergence was nearly 1:1 (52.41?% males), a simple population simulation indicated that the differential mortality of sexes can lead to a female-biased sex ratio estimation (57.88?% females) under random sampling in the natural environments. Our results imply that the primary sex ratio of monogenous gall midges is nearly 1:1 and that the arrhenogenic/thelygenic gall midges are not able to alter the number of their male/female progenies in response to changes in environmental conditions.     

Stand-alone PV-hydrogen energy system in Taleghan-Iran using HOMER software: optimization and techno-economic analysis

One of the most attractive features of hydrogen as an energy carrier is that it can be produced from water. Hydrogen has the highest energy content per unit mass as compared to chemical fuel and can be substituted. Its burning process is non-polluting, and it can be used in the fuel cells to produce both electricity and useful heat. Photovoltaic arrays can be used in supplying the water electrolysis systems by their energy requirements. During the daylight hours, the sunlight on the photovoltaic array converts into electrical energy which can be used for electrolyzer. The hydrogen produced by the electrolyzer is compressed and stored in hydrogen vessel and provides energy for the fuel cell to meet the load when the solar energy is insufficient. This study investigates a stand-alone power system that consists of PV array as power supply and electrolyzer. They have been integrated and worked at the Taleghan renewable energies’ site in Iran. The National Renewable Energy Laboratory’s Hybrid Optimization Model for Electric Renewables simulation software has been used to carry out the optimal design and techno-economic viability of the energy system. The simulation results demonstrate that energy system is composed of 10-kW PV array, 3.5-kW electrolyzer, 0.4-kW proton exchange membrane fuel cell, 2.5-kW inverter, and 60 batteries (100 Ah and 12 V). The total initial capital cost, net present cost, and cost of electricity produced from this energy system are 193,563 US$, 237,509 US$, and 3.35 US$/kWh, respectively.     

Optimization of metal bio-acid leaching from mobile phone printed circuit boards using natural organic acids and H2O2

Journal of Material Cycles and Waste Management - With increased popularity and technological innovation, more and more electric and electronic equipment wastes (e-wastes) are being generated....     

Structural,Morphological and Thermal Properties of Nano Filler Produced from Date Palm-Based Micro Fibers (Phoenix dactylifera L.)

Journal of Polymers and the Environment - In this century, the development of nano-sized filler from biomass material has become the main focus of industries in achieving their final green...     

Design and optimization of new La1−xCexNi1−yFeyO3 (x,y = 0–0.4) nano catalysts in dry reforming of methane

The paper reports the production of syngas from dry reforming of methane (DRM) over La_1?xCe_xNi_1?yFe_yO₃ (x, y = 0–0.4) perovskites. A series of La_1?xCe_xNi_1?yFe_yO₃ were designed by central composite design (CCD) and synthesized by a sol–gel auto combustion method. Artificial neural network (ANN) approach was used to determine the relationship between preparation and operational parameters on the performance of the catalysts in the DRM process. Nickel mole fraction, lanthanum mole fraction, calcination temperature, and reaction temperature were considered as input variables, and conversion of methane was considered as the output variable. An ANN model with nine neurons in the hidden layer was the suitable in predicting conversion of methane. The genetic algorithm (GA) was subsequently used to determine the optimal preparation condition for enhancing the conversion of methane. La_0.6Ce_0.4Ni_0.99Fe_0.01O₃ catalyst, calcined at 756°C was obtained to be the most active catalyst owing to the optimal composition of nickel and lanthanum in the catalyst formulation.     

Comparative phytotoxicity of ZnO nanoparticles,ZnO microparticles,and Zn2+ on rapeseed (Brassica napus L.): investigating a wide range of concentrations

The effects of ZnO nanoparticles (NPs), ZnO microparticles (MPs), and zinc ions (Zn²⁺) on some growth parameters of rapeseed (Brassica napus) seedlings have been studied. The growth inhibition by ZnO NPs was not stronger than that by ZnO MPs while treatment with Zn²⁺ inhibition was clearly stronger.     

Proteomics study of Southern Punjab Pakistani cobra (Naja naja: formerly Naja naja karachiensis) venom

Because of the potential of significant geographic variation in the compositions of snake venoms, much insight can be gained by examining individuals originating from diverse locations, and detailed characterization of any species can only be done by including animals from the entire range. Pakistani N. naja (formerly N. naja karachiensis) venom was decomplexed by applying diverse techniques and found a concoction of proteins (a total of 43 venomous proteins comprising 11 super families) from 6 to 200 kilodaltons in size. Among them three finger toxins (58%), phosphoplipses A₂ (19%), snake venom metalloproteinases (5%), l-amino acid oxidases (5%), helvepryns (3%), vespryns (2%), cobra venom factor (2%), 5′-nucleotidases (2%), venom nerve growth factor (2%), and Kunitz type serine protease inhibitor (2%) were included. It is the first report that this venom possesses significantly higher percentage of three finger toxins belonging to the cytotoxins (32% overall) and α‐neurotoxins (32% overall, predominately long chain neurotoxins, 24% overall) compared to N. naja from other geographic locations. Better understanding of intraspecific variations in venom can improve the development of location-specific anti-venoms. Furthermore, this pool of diverse toxins could potentially be a source of novel drug candidates for the treatment of muscarinic acetylcholine receptors mediated nervous disorders.     

Impacts of land use and land cover change on the interactions among multiple soil-dependent ecosystem services (case study: Jiroft plain,Iran)

The spatial and temporal distribution pattern is an outstanding feature of the relationship among ecosystem services (ESs) that explains links between human activities and disturbed chemical composition of ecosystems. This study investigated the spatiotemporal variation of land use/cover changes (LUCC) and quantifies the change in four essential ecosystem services with an emphasis on soil (nutrient delivery ratio, carbon storage, crop production, and water yield) and their relationships in the Jiroft plain, Iran, during 1996–2016 through analytical tools including Land Change Modeler, and the Integrated Valuation of Ecosystem Services and Tradeoff. During the 20-year concentrate period, there was a considerable overall gain in cropland (5396 km²) and urban (1787 km²), loss of unused land (5692 km²), water (2088 km²), and forest (1083 km²). As a result of LUCC, while crop production and nutrient delivery ratio showed a rising trend, overall carbon storage and water yield decreased. The spatiotemporal trade-off between carbon storage and crop production, the temporal trade-off between crop production and water yield, and synergy between water yield and crop production were widespread in Jiroft plain. These results showed that the interaction among ESs mutates over time and can be changed under planning and policies. This study will enrich the research of the geographical distribution of ESs interaction in dryland ecosystems to provide practical ecosystem management under local conditions.

     

Oxidative potential (OP) and mineralogy of iron ore particulate matter at the Gol-E-Gohar Mining and Industrial Facility (Iran)

Concentrations of total suspended particulate matter, particulate matter with aerodynamic diameter <2.5 μm (PM_2.5), particulate matter <10 μm (PM₁₀), and fallout dust were measured at the Iranian Gol-E-Gohar Mining and Industrial Facility. Samples were characterized in terms of mineralogy, morphology, and oxidative potential. Results show that indoor samples exceeded the 24-h PM_2.5 and PM₁₀ mass concentration limits (35 and 150 µg m^?3, respectively) set by the US National Ambient Air Quality Standards. Calcite, magnetite, tremolite, pyrite, talc, and clay minerals such as kaolinite, vermiculite, and illite are the major phases of the iron ore PM. Accessory minerals are quartz, dolomite, hematite, actinolite, biotite, albite, nimite, laumontite, diopside, and muscovite. The scanning electron microscope structure of fibrous-elongated minerals revealed individual fibers in the range of 1.5 nm to 71.65 µm in length and 0.2 nm to 3.7 µm in diameter. The presence of minerals related to respiratory diseases, such as talc, crystalline silica, and needle-shaped minerals like amphibole asbestos (tremolite and actinolite), strongly suggests the need for detailed health-based studies in the region. The particulate samples show low to medium oxidative potential per unit of mass, in relation to an urban road side control, being more reactive with ascorbate than with glutathione or urate. However, the PM oxidative potential per volume of air is exceptionally high, confirming that the workers are exposed to a considerable oxidative environment. PM released by iron ore mining and processing activities should be considered a potential health risk to the mine workers and nearby employees, and strategies to combat the issue are suggested.