Geospatial strategy for sustainable management of municipal solid waste for growing urban environment

This paper presents the implementation of a Geospatial approach for improving the Municipal Solid Waste (MSW) disposal suitability site assessment in growing urban environment. The increasing trend of population growth and the absolute amounts of waste disposed of worldwide have increased substantially reflecting changes in consumption patterns, consequently worldwide. MSW is now a bigger problem than ever. Despite an increase in alternative techniques for disposing of waste, land-filling remains the primary means. In this context, the pressures and requirements placed on decision makers dealing with land-filling by government and society have increased, as they now have to make decisions taking into considerations environmental safety and economic practicality. The waste disposed by the municipal corporation in the Bhagalpur City (India) is thought to be different from the landfill waste where clearly scientific criterion for locating suitable disposal sites does not seem to exist. The location of disposal sites of Bhagalpur City represents the unconsciousness about the environmental and public health hazards arising from disposing of waste in improper location. Concerning about urban environment and health aspects of people, a good method of waste management and appropriate technologies needed for urban area of Bhagalpur city to improve this trend using Multi Criteria Geographical Information System and Remote Sensing for selection of suitable disposal sites. The purpose of GIS was to perform process to part restricted to highly suitable land followed by using chosen criteria. GIS modeling with overlay operation has been used to find the suitability site for MSW.     

Persistence and risk assessment of spiromesifen on tomato in India: a multilocational study

Supervised field trials were conducted at four different agro-climatic locations of India to evaluate the dissipation pattern and risk assessment of spiromesifen on tomato. Spiromesifen 240 SC was sprayed on tomato at 150 and 300 g a.i.?ha^?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10 and 15 days after treatment and soil at 15 days after treatment. Quantification of residues was done on gas chromatograph–mass spectrophotometer in selective ion monitoring mode in the mass range of 271–274 (m/z). The limit of quantification of the method was found to be 0.05 mg kg^?1, while the limit of determination was 0.015 mg kg^?1. Residues were found below the LOQ of 0.05 mg kg^?1 in 10 days at both the doses of application at all the locations. Spiromesifen dissipated with a half-life of 0.93–1.38 days at the recommended rate of application and 1.04–1.34 days at the double the rate of application. Residues of spiromesifen in soil were detectable level (<0.05 mg kg^?1) after 15 days of treatment. A preharvest interval (PHI) of 1 day has been recommended on tomato on the basis of data generated under All India Network Project on Pesticide Residues. Spiromesifen 240 SC has been registered for its use on tomato by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of spiromesifen on tomato has been fixed by Food Safety Standard Authority of India, Ministry of Health and Family Welfare, Government of India as 0.3 μg/g after its risk assessment.     

Persistence behaviour of imidacloprid and its metabolites in soil under sugarcane

The persistence and metabolism of imidacloprid in soil under sugarcane were studied following application of imidacloprid at 20 and 80 g active ingredient (a.i.) ha^?1. Soil samples were collected at different time intervals (7, 15, 30, 45, 60 and 90 days after application), and the residues of imidacloprid and its metabolites (6-chloronicotinic acid, nitrosimine, imidacloprid-NTG, olefin, urea and 5-hydroxy) were quantified by high-performance liquid chromatography. In soil, the total imidacloprid residues were mainly constituted by the parent compound followed by 6-chloronicotinic acid, nitrosimine and imidacloprid-NTG metabolites. Maximum residues of imidacloprid and its metabolites were 4.29 and 7.81 mg kg^?1 in soil samples collected 7 days after the application of imidacloprid at 20 and 80 g a.i. ha^?1, respectively. At both doses, these residues declined to below the detectable limit in soil after 90 days of application. Olefin, urea and 5-hydroxy metabolites were not detected in soil. Dissipation of total imidacloprid residues did not follow the first-order kinetics with a coefficient of determination value of 0.883 and 0.838 for the recommended dose and four times the recommended dose, respectively. The half-life (T _1/2) value of total imidacloprid was observed to be 10.64 and 10.10 days for the recommended dose and four times the recommended dose, respectively.     

Assessing the impact of irrigation treatments on thiram residual trends: Correspondence with numerical modelling and field-scale experiments

The present study was undertaken to study the trends of transport of thiram, a dithiocarbamate pesticide, at different time and depth in the fields under real field conditions for wheat crop. Numerical simulations were carried out by solving the coupled soil–water content movement and mass transport equations using HYDRUS- 1D. The supplementary data used for paramaterization of HYDRUS-1D comprise of irrigation treatments, climatic conditions, and soil characteristics. Results focus on the effects and influence of irrigation treatments on pesticide persistence and mobility. Modelling results were in good agreement with the experimentally determined thiram concentrations. Application of the model to measured field data of thiram movement indicates that the modelling approach can provide reliable and useful estimates of the mass flux of water and non-volatile pesticide in vadose zone. For policy-makers and planners, some regulation strategies are suggested for controlling inappropriate pesticide application under deficit irrigation or rain-fed conditions.     

Contamination of nitrate and fluoride in ground water along the Ganges Alluvial Plain of Kanpur district, Uttar Pradesh, India

Nitrate-N and Fluoride concentrations were analyzed in shallow and unconfined ground water aquifers of Kanpur district along the Ganges Alluvial Plain of Northern India. Kanpur district was divided into three zones namely, Bithore, Kanpur City and Beyond Jajmau and sampling was carried out three seasons (summer, monsoon and winter). The data set consisted of the results of water samples from around 99 India Mark II hand Pumps, which were analyzed for summer monsoon and winter seasons. In Bithore zone, 19% of the samples exceeded the BIS (Bureau of India Standards) limit 10.2 mg/l as nitrate-N and as high as 166 mg/l as nitrate-N was observed. 10% and 7% samples in Kanpur city and beyond Jajmau zone respectively, exceeded the BIS limit. The Frequency distribution histogram of nitrate-N revealed a skewed (non-normal) distribution. Both point and non-point sources contribute to the ground water contamination. Especially in Bithore zone, the point sources could be attributed to the animal wastes derived from cows and buffaloes and non point sources could be due to the extensive agricultural activity prevalent in that area. Fluoride concentration in most samples was within the BIS maximum permissible level of 1.5 mg/l. No significant seasonal variation in water quality parameters was observed.     

Occurrence of phthalic acid esters in Gomti River Sediment, India

Cadmium and lead are important environmental pollutants with high toxicity to animals and human. Soils, though have considerable metal immobilizing capability, can contaminate food chain via plants grown upon them when their built-up occurs to a large extent. Present experiment was carried out with the objective of quantifying the limits of Pb and Cd loading in soil for the purpose of preventing food chain contamination beyond background concentration levels. Two separate sets of pot experiment were carried out for these two heavy metals with graded levels of application doses of Pb at 0.4–150 mg/kg and Cd at 0.02–20 mg/kg to an acidic light textured alluvial soil. Spinach crop was grown for 50 days on these treated soils after a stabilization period of 2 months. Upper limit of background concentration levels (C _ul) of these metals were calculated through statistical approach from the heavy metals concentration values in leaves of spinach crop grown in farmers’ fields. Lead and Cd concentration limits in soil were calculated by dividing C _ul with uptake response slope obtained from the pot experiment. Cumulative loading limits (concentration limits in soil minus contents in uncontaminated soil) for the experimental soil were estimated to be 170 kg Pb/ha and 0.8 kg Cd/ha. Based on certain assumptions on application rate and computed cumulative loading limit values, maximum permissible Pb and Cd concentration values in municipal solid waste (MSW) compost were proposed as 170 mg Pb/kg and 0.8 mg Cd/kg, respectively. In view of these limiting values, about 56% and 47% of the MSW compost samples from different cities are found to contain Pb and Cd in the safe range.     

Hydrogeochemical processes controlling the high fluoride concentration in groundwater: a case study at the Boden block area,Orissa, India

The present investigation reports the assessment of hydrochemical/geochemical processes controlling the concentration of fluoride in groundwater of a village in India (Boden block, Orissa). Boden block is one of the severely affected fluoride-contaminated areas in the state of Orissa (India). The sampling and subsequent analysis of water samples of the study area was carried out following standard prescribed methods. The results of the analysis indicate that 36.60% groundwater F⁻ concentration exceeds the limit prescribed by the World Health Organization for drinking water. The rock interaction with groundwater containing high concentration of HCO₃⁻ and Na⁺ at a higher pH value of the medium could be one of the important reasons for the release of F⁻ from the aquatic matrix into groundwater. Geochemical classification of groundwater based on Chadha rectangular diagram shows that most of the groundwater samples having fluoride concentration more than 1.5 mg L⁻¹ belongs to the Na-K-HCO₃ type. The saturation index values evaluated for the groundwater of the study area indicated that it is oversaturated with respect to calcite, whereas the same is undersaturated with respect to fluorite content. The deficiency of calcium ion concentration in the groundwater from calcite precipitation favors fluorite dissolution leading to excess of fluoride concentration. The risk index was calculated as a function of fluoride level in drinking water and morbidity of fluorosis categorizes high risk for villages of Amera and Karlakote panchayat of Boden block.     

The impact assessment of Diwali fireworks emissions on the air quality of a tropical urban site, Hyderabad, India, during three consecutive years

Diwali is one of the largest festivals for Hindu religion which falls in the period October–November every year. During the festival days, extensive burning of firecrackers takes place, especially in the evening hours, constituting a significant source of aerosols, black carbon (BC), organics, and trace gases. The widespread use of sparklers was found to be associated with short-term air quality degradation events. The present study focuses on the influence of Diwali fireworks emissions on surface ozone (O₃), nitrogen oxides (NO _x ), and BC aerosol concentration over the tropical urban region of Hyderabad, India during three consecutive years (2009–2011). The trace gases are analyzed for pre-Diwali, Diwali, and post-Diwali days in order to reveal the festivity’s contribution to the ambient air quality over the city. A twofold to threefold increase is observed in O₃, NO _x , and BC concentrations during the festival period compared to control days for 2009–2011, which is mainly attributed to firecrackers burning. The high correlation coefficient (~0.74) between NO _x and SO₂ concentrations and higher SO₂/NO _x (S/N) index suggested air quality degradation due to firecrackers burning. Furthermore, the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observation-derived aerosol subtyping map also confirmed the presence of smoke aerosols emitted from firecrackers burning over the region. Nevertheless, the concentration level of pollutants exhibited substantial decline over the region during the years 2010 and 2011 compared to 2009 ascribed to various awareness campaigns and increased cost of firecrackers.     

Study on concentration of ambient NH 3 and interactions with some other ambient trace gases

We present diurnal variation of ambient ammonia (NH₃) in relation with other trace gases (O₃, CO, NO, NO₂, and SO₂) and meteorological parameters at an urban site of Delhi during winter period. For the first time, ambient ammonia (NH₃) was monitored very precisely and continuously using ammonia analyzer, which operates on chemiluminescence method. NH₃ estimation efficiency of the chemiluminescence method (>90%) is much higher than the conventional chemical trapping method (reproducibility 4.5%). Ambient NH₃ concentration reaches its maxima (46.17 ppb) at night and minimum during midday. Result reveals that the ambient ammonia (NH₃) concentration is positively correlated with ambient NO (r ²?=?0.79) and NO₂ (r ²?=?0.91) mixing ratio and negatively correlated with ambient temperature (r ²?=???0.32). Wind direction and wind speed indicates that the nearby (~500 m NW) agricultural fields may be major source of ambient NH₃ at the observational site.     

Assessment of flubendiamide residues in pigeon pea in different agro-climatic zones of India

Supervised field trials were conducted at the research farms of four agricultural universities located at different agro-climatic zones of India to find out the harvest time residues of flubendiamide and its des-iodo metabolite on pigeon pea (Cajanus cajan) during the year 2006-2007. Two spray applications of flubendiamide 20 WDG at 50 g (T(1)) and 100 g (T(2)) a.i./ha were given to the crop at 15-days interval. The foliage samples at different time intervals were drawn at only one location, however, the harvest time samples of pigeon pea grain, shell, and straw were drawn at all the four locations. The residues were estimated by HPLC coupled with UV-VIS variable detector. No residues of flubendiamide and its des-iodo metabolite were found at harvest of the crop at or above the LOQ level of 0.05 μg/g. On the basis of the data generated, a pre-harvest interval (PHI) of 28 days has been recommended and the flubendiamide 20 WDG has been registered for use on pigeon pea by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India and the MRL has been fixed by Ministry of Health and Family Welfare, Government of India under Prevention of Food and Adulteration as 0.05 μg/g on pigeon pea grains.