ASSESSMENT USING GIS AND SEDIMENT ROUTING OF THE PROPOSED REMOVAL OF BALLVILLE DAM,SANDUSKY RIVER,OHIO1

ABSTRACT: The proposed removal of Ballville Dam was assessed by (1) using a new Geographic Information Systems (GIS) based method for calculating reservoir sediment storage, (2) evaluating sediment properties and contamination from core data, and (3) assessing downstream impacts from sediment routing calculations. A 1903 (pre‐dam) map was manipulated using GIS to recreate the reservoir bathymetry at time of dam construction and used in combination with a detailed 1993 bathymetric survey to calculate sediment volumes and thickness. Reservoir sediment properties and geochemistry were determined from 14 sediment vibracores. Annual sedimentation rates varied from 1.7 to 4.3 g/cm²/yr based on Cesium‐137 (¹³⁷Cs) and Lead‐210 (²¹⁰Pb) geochronology and dated flood layers. The pore fluid geochemistry (Ba, Co, Cu, Mn) of four cores showed surficial enrichments in Cu, while Co and Mn show secondary peaks within the sediments. GIS calculations showed that a designed channel through the former reservoir able to accommodate the 10 percent Probable Maximum Flood (PMF) would require removing approximately 0.35 million m³ of sediment (27 percent of the reservoir fill), either by dredging at a cost of up to $6.3 million or by releasing fine grained sediment downstream. A sediment routing model was applied for the critical 6 km downstream using four cross sections. The sediment routing model predicts that, for flows exceeding minimum Mean Daily Flow (1924 to 1998 data), greater than 90 percent of this sediment would be transported through downstream reaches into Lake Erie (Sandusky Bay).     

Characterization of phosphorus species in biosolids and manures using XANES spectroscopy

Identification of the chemical P species in biosolids or manures will improve our understanding of the long-term potential for P loss when these materials are land applied. The objectives of this study were to determine the P species in dairy manures, poultry litters, and biosolids using X-ray absorption near-edge structure (XANES) spectroscopy and to determine if chemical fractionation techniques can provide useful information when interpreted based on the results of more definitive P speciation studies. Our XANES fitting results indicated that the predominant forms of P in organic P sources included hydroxylapatite, PO(4) sorbed to Al hydroxides, and phytic acid in lime-stabilized biosolids and manures; hydroxylapatite, PO(4) sorbed on ferrihydrite, and phytic acid in lime- and Fe-treated biosolids; and PO(4) sorbed on ferrihydrite, hydroxylapatite, beta-tricalcium phosphate (beta-TCP), and often PO(4) sorbed to Al hydroxides in Fe-treated and digested biosolids. Strong relationships existed between the proportions of XANES PO(4) sorbed to Al hydroxides and NH(4)Cl- + NH(4)F-extractable P, XANES PO(4) sorbed to ferrihydrite + phytic acid and NaOH-extractable P, and XANES hydroxylapatite + beta-TCP and dithionite-citrate-bicarbonate (DCB)- + H(2)SO(4)-extractable P (r(2) = 0.67 [P = 0.01], 0.78 [P = 0.01], and 0.89 [P = 0.001], respectively). Our XANES fitting results can be used to make predictions about long-term solubility of P when biosolids and manures are land applied. Fractionation techniques indicate that there are differences in the forms of P in these materials but should be interpreted based on P speciation data obtained using more advanced analytical tools.     

Kelp as a Bioindicator: Does it Matter Which Part of 5 M Long Plant is Used for Metal Analysis?

Kelp may be useful as a bioindicator because they are primary producers that are eaten by higher trophic level organisms, including people and livestock. Often when kelp or other algae species are used as bioindicators, the whole organism is homogenized. However, some kelp can be over 25 m long from their holdfast to the tip of the blade, making it important to understand how contaminant levels vary throughout the plant. We compared the levels of arsenic, cadmium, chromium, lead, manganese, mercury and selenium in five different parts of the kelp Alaria nana to examine the variability of metal distribution. To be useful as a bioindicator, it is critical to know whether levels are constant throughout the kelp, or which part is the highest accumulator. Kelp were collected on Adak Island in the Aleutian Chain of Alaska from the Adak Harbor and Clam Cove, which opens onto the Bering Sea. In addition to determining if the levels differ in different parts of the kelp, we wanted to determine whether there were locational or size-related differences. Regression models indicated that between 14% and 43% of the variation in the levels of arsenic, cadmium, chromium, manganese, mercury, and selenium was explained by total length, part of the plant, and location (but not for lead). The main contributors to variability were length (for arsenic and selenium), location (mercury), and part of the plant (for arsenic, cadmium, chromium and manganese). The higher levels of selenium occurred at Clam Cove, while mercury was higher at the harbor. Where there was a significant difference among parts, the holdfast had the highest levels, although the differences were not great. These data indicate that consistency should be applied in selecting the part of kelp (and the length) to be used as a bioindicator. While any part of Alaria could be collected for some metals, for arsenic, cadmium, chromium, and manganese a conversion should be made among parts. In the Aleutians the holdfast can be perennial while the blade, whipped to pieces by winter wave action, is regrown each year. Thus the holdfast may be used for longer-term exposure for arsenic, cadmium, chromium and manganese, while the blade can be used for short-term exposure for all metals. Cadmium, lead and selenium were at levels that suggest that predators, including people, may be at risk from consuming Alaria. More attention should be devoted to heavy metal levels in kelp and other algae from Adak, particularly where they may play a role in a subsistence diets.     

Development and application of quantitative methods for monitoring dermal and inhalation exposure to propiconazole

Quantitative methods to measure dermal and inhalation exposure to the fungicide propiconazole were developed in the laboratory and applied in the occupational exposure setting for monitoring five farm workers' exposure during pesticide preparation and application to peach crops. Dermal exposure was measured with tape-strips applied to the skin, and the amount of propiconazole was normalized to keratin content in the tape-strip. Inhalation exposure was measured with an OVS tube placed in the worker's breathing-zone during pesticide handling. Samples were analyzed by GC-MS in EI+ mode (limit of detection 6 pg microl(-1)). Dermal exposure ranged from non-detectable to 32.1 +/- 22.6 ng per microg keratin while breathing-zone concentrations varied from 0.2 to 2.2 microg m(-3). A positive correlation was observed between breathing-zone concentrations and ambient air temperature (r2 = 0.87, p < 0.01). Breathing-zone concentrations did not correlate with dermal exposure levels (r2 = 0.11, p = 0.52). Propiconazole levels were below limit of detection when rubber gloves, coveralls, and full-face mask were used. The total-body propiconazole dose, determined for each worker by summing the estimated dermal dose and inhalation dose, ranged from 0.01 to 12 microg per kg body weight per day. Our results show that tape-stripping of the skin and the OVS can be effectively utilized to measure dermal and inhalation exposure to propiconazole, respectively, and that the dermal route of exposure contributed substantially more to the total dose than the inhalation route.     

Clinal variation in anuran advertisement calls: basis for acoustic isolation?

Summary The calls of male treefrogs (Eleutherodactylus coqui) were studied along an altitudinal gradient in the Luquillo Mountains in eastern Puerto Rico. The fundamental frequency of each note in the advertisement call was highly negatively correlated with altitude. Although males responded vigorously to playbacks of calls of other males recorded at their own altitude, males at high altitudes responded less frequently to recorded calls of males from low altitudes, and males at low altitudes responded less frequently to recorded calls of males from high altitudes. These results are discussed in relation to potential isolation in contiguous populations of E. coqui.     

Growth in otter (Lutra lutra) populations in the UK as shown by long-term monitoring

European otters declined dramatically from the 1950s, disappearing from many rivers. We report here on longterm monitoring (from 1977) in 3 catchments in western Britain that were recolonized naturally and in 2 catchments in eastern England that were reinforced by captive-bred otters. A minimum of 16-years data was collected on each river until 2002. At a series of sites in each study river, the percentages which were positive for otters and the number of spraints per sprainting site were recorded and combined to produce an annual index of population. One western river, naturally recolonized, showed rapid early population growth for 5 years, followed by slower growth, while growth was steadier in 2 catchments which already held some otters at the beginning of the study. Colonization on the eastern rivers was slower, with greater fluctuations over time. Annual population growth rates were estimated at 1-7%, higher in the earlier years. A strategy for annual monitoring of otters is recommended.     

唐山市工业区大气污染对小学生肺功能的影响

探讨了工业区大气污染对小学生肺功能的影响。在唐山市工业区和相对清洁区选取452名小学生为研究对象,进行肺功能的测定和问卷调查。用多元回归分析建立模型后,以实测值占预计值的百分比为统计量进行分析。调查结果显示小学生肺功能指标中MVV、V25污染区低于对照区,VC、FEV、V25、V50的异常率高于对照区,且与大气中SO2的浓度有关。     

An agent based model to simulate structural and land use changes in agricultural systems of the argentine pampas

The Argentine Pampas, one of the main agricultural areas in the world, recently has undergone significant changes in land use and structural characteristics of agricultural production systems. Concerns about the environmental and societal impacts of the changes motivated development of an agent-based model (ABM) to gain insight on processes underlying recent observed patterns. The model is described following a standard protocol (ODD). Results are discussed for an initial set of simplified simulations performed to understand the processes that generated and magnified the changes in the Pampas. Changes in the structure of agricultural production and land tenure seem to be driven by differences among farmers’ ability to generate sufficient agricultural income to remain in business. In turn, as no off-farm or credit is modeled, economic sustainability is tied to initial resource endowment (area cropped). Farmers operating small areas are economically unviable and must lease out their farms to farmers operating larger areas. This leads to two patterns: (a) a concentration of production (fewer farmers operating larger areas) and, (b) an increase in the area operated by tenants. The simulations showed an increase of soybean area, linked to the higher profitability of this crop. Despite the stylized nature of initial simulations, all emerging patterns are highly consistent with changes observed in the Pampas.