Biosorption study of potential fungi for copper remediation from Peninsular Malaysia

The ability to grow in heavy metal contaminated areas and absorb heavy metals from the environment make fungi a potentially viable biological‐based technology for remediating hazardous heavy metals in soil. In this study, 10 fungi from a copper (Cu)‐polluted area in Malaysia were isolated, with the four highest growth fungi identified as Simplicillium subtropicum, Fusarium solani, Aspergillus tamari, and Aspergillus niger. Results from toxicity and biosorption testing showed that A. niger and F. solani grew the fastest in the presence of Cu, but exhibited lower Cu uptake per unit of biomoass. In contrast, A. tamarii and S. subtropicum had lower growth rates, but showed better uptake of Cu per unit of biomass. S. subtropicum was identified as the best species for bioremediation because it had the highest Cu uptake and positive growth measured in the presence of Cu at concentrations below 100 mg/L. A niger proved to be most suitable for bioremediation if the concentration of Cu exceeds 100 mg/L.     

Quantifying urban heat island intensity in Hong Kong SAR, China

This paper addresses the methodological concerns in quantifying urban heat island (UHI) intensity in Hong Kong SAR, China. Although the urban heat island in Hong Kong has been widely investigated, there is no consensus on the most appropriate fixed point meteorological sites to be used to calculate heat island intensity. This study utilized the Local Climate Zones landscape classification system to classify 17 weather stations from the Hong Kong Observatory’s extensive fixed point meteorological observation network. According to the classification results, the meteorological site located at the Hong Kong Observatory Headquarters is the representative urban weather station in Hong Kong, whereas sites located at Tsak Yue Wu and Ta Kwu Ling are appropriate rural or nonurbanized counterparts. These choices were validated and supported quantitatively through comparison of long-term annual and diurnal UHI intensities with rural stations used in previous studies. Results indicate that the rural stations used in previous studies are not representative, and thus, the past UHI intensities calculated for Hong Kong may have been underestimated.     

Inherent risk assessment—A new concept to evaluate risk in preliminary design stage

Quantitative Risk Assessment (QRA) has been a very popular and useful methodology which is widely accepted by the industry over the past few decades. QRA is typically carried out at a stage where complete plant has been designed and sited. At that time, the opportunity to include inherent safety design features is limited and may incur higher cost. This paper proposes a new concept to evaluate risk inherent to a process owing to the chemical it uses and the process conditions. The risk assessment tool is integrated with process design simulator (HYSYS) to provide necessary process data as early as the initial design stages, where modifications based on inherent safety principles can still be incorporated to enhance the process safety of the plant. The risk assessment tool consists of two components which calculate the probability and the consequences relating to possible risk due to major accidents. A case study on the potential explosion due to the release of flammable material demonstrates that the tool is capable to identify potential high risk of process streams. Further improvement of the process design is possible by applying inherent safety principles to make the process under consideration inherently safer. Since this tool is fully integrated with HYSYS, re-evaluation of the inherent risk takes very little time and effort. The new tool addresses the lack of systematic methodology and technology, which is one of the barriers to designing inherently safer plants.     

Preparation and Use of Spatially and Temporally Resolved Emission Inventories in the San Francisco Bay Region

Three regional agencies recently prepared an Air Quality Maintenance Plan for the San Francisco Bay Area oxidant problem. An Eulerian, photochemical model, LIRAQ, provided the technical basis for the plan recommendations. A major LIRAQ input is an emission inventory accurately resolved to one kilometer and one hour increments. The cooperating agencies prepared such inventories, covering 20,000 sq km, for one base and two future years. Several manual and computer-assisted techniques were developed to utilize a variety of independent data bases. Population, land use, employment and transportation data were oganized into a common system of coordinates and units to produce the needed spatial input. Estimates of hourly variation were made by source category based on production rates, fuel use, traffic patterns, flight schedules, and other factors. The result was a series of consistent, detailed inventories which provide a powerful air quality modeling and planning tool. The detail is attained at considerable expense, but the cost is easily justifiable when compared to implementation costs for control strategies.     

In search of a recyclable sulphur dioxide sponge—a new look at an old system

The sulphur dioxide content and thermal stability of the quinol-SO₂ clathrate have been studied by thermogravimetric analysis (TG), its derivative (DTG) and differential scanning calorimetry (DSC). These analyses demonstrated the thermal recoverability of the quinol from the clathrate and hence its potential use as a sponge for SO₂ present in the environment as a pollutant. Similarly, Bu₄N⁺I^- was found to occlude NO₂ and SO₂ at 50°C in solution.     

Occurrence and suitability of pharmaceuticals and personal care products as molecular markers for raw wastewater contamination in surface water and groundwater

This study aimed to provide the first and comprehensive data on the occurrence of 17 target pharmaceuticals and personal care products (PPCPs) in urban water environment in Singapore. Meanwhile, this study also verified the suitability of these PPCPs as specific markers of raw wastewater contamination in receiving water bodies in highly urbanized areas where both surface water and groundwater are not impacted by the discharge of treated wastewater effluents. Analytical results of wastewater showed that among 17 target PPCPs examined, only 5 PPCPs were detected in 100 % of raw wastewater samples, including acetaminophen (ACT), carbamazepine (CBZ), caffeine (CF), diethyltoluamide (DEET), and salicylic acid (SA). Similarly, these PPCPs were found in most surface water and groundwater. Interestingly, the three PPCPs (ACT, CBZ, and SA) were only detected in surface water and groundwater in the sampling sites close to relatively older sewer systems, while they were absent in background samples that were collected from the catchment with no known wastewater sources. This suggests that ACT, CBZ, and SA can be used as specific molecular markers of raw wastewater in surface water and groundwater. This study also confirmed that CF and DEET were not really associated with wastewater sources, thus cannot serve well as specific molecular markers of wastewater contamination in receiving water bodies. To the best knowledge of the authors, the use of ACT and SA as specific molecular markers of raw wastewater contamination in urban surface waters and groundwater was first reported. Further studies on the use of ACT, CBZ, and SA along with other chemical/microbial markers are recommended to identify and differentiate contamination sources of surface waters/groundwater.     

Understanding conflicting cultural models of outdoor cats to overcome conservation impasse

Many conservation conflicts are scientifically complex yet are rooted in value conflicts, which result in an impasse. Additional biological information alone is insufficient to resolve this type of conflict. Conceptual models that articulate the material aspects of a system are increasingly used to identify areas where parties disagree. Yet, modeling processes typically follow the conveners’ rules for discussing and assessing the topic, which can exacerbate conflict. Researchers have identified a need for processes that require participants to reflect on the limits of their own philosophical assumptions and acknowledge other perspectives. Cultural models are a promising tool for this purpose because they include nonmaterial beliefs, morals, and values that guide people's understanding of how to interact with an issue, sometimes subconsciously. We explored how cultural models used with conceptual models can improve understanding of value conflicts and used outdoor cat management as a case study. We conducted interviews and focus group discussions with wildlife conservation and cat welfare professionals involved in outdoor cat policy discussions in Hawaii and Washington, D.C. From these conversations, we developed a conceptual model of the outdoor cat management system and cultural models that led stakeholders to weigh elements of the conceptual model differently. Although wildlife conservation professionals generally spoke about outdoor cats as invasive species, cat welfare professionals spoke about them as homeless pets. These conflicting conceptualizations of what an outdoor cat is may help explain the root of many long-standing disagreements. Examining how and when stakeholders invoke different cultural models allowed us to identify management actions that work with, rather than challenge, those models. Dialogue that embraces conflicting cultural models can be difficult and uncomfortable, but has great potential to overcome conservation impasse and achieve lasting conservation results.     

Night-sky brightness monitoring in Hong Kong

Results of the first comprehensive light pollution survey in Hong Kong are presented. The night-sky brightness was measured and monitored around the city using a portable light-sensing device called the Sky Quality Meter over a 15-month period beginning in March 2008. A total of 1,957 data sets were taken at 199 distinct locations, including urban and rural sites covering all 18 Administrative Districts of Hong Kong. The survey shows that the environmental light pollution problem in Hong Kong is severe—the urban night skies (sky brightness at 15.0 mag arcsec^− 2) are on average ~ 100 times brighter than at the darkest rural sites (20.1 mag arcsec^− 2), indicating that the high lighting densities in the densely populated residential and commercial areas lead to light pollution. In the worst polluted urban location studied, the night-sky at 13.2 mag arcsec^− 2 can be over 500 times brighter than the darkest sites in Hong Kong. The observed night-sky brightness is found to be affected by human factors such as land utilization and population density of the observation sites, together with meteorological and/or environmental factors. Moreover, earlier night skies (at 9:30 p.m. local time) are generally brighter than later time (at 11:30 p.m.), which can be attributed to some public and commercial lightings being turned off later at night. On the other hand, no concrete relationship between the observed sky brightness and air pollutant concentrations could be established with the limited survey sampling. Results from this survey will serve as an important database for the public to assess whether new rules and regulations are necessary to control the use of outdoor lightings in Hong Kong.     

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.