Health implication among occupational exposed workers in a chromium alloy factory, Thailand

IntroductionNationalStatisticalOffice ,Thailand (NSO ,2 0 0 0 )reportedthattheneedformetalmanufacturingindustriesandassociatedproductionsectorhasincreasedatanextremelyrapidrate ,especiallyinthecentralpartofThailand .Itisestimatedthattherearemorethan 10 0 …     

Benzene and lead exposure assessment among occupational bus drivers in Bangkok traffic

IntroductionAirpollutionproblemsasaresultoffastgrowthinthetotalnumberofvehiclesinurbancitiesareontheincrease .PreliminaryepidemiologicalexposureassessmentsuggestthatthedetrimentaleffectofairpollutiongeneratedbyvehiculartrafficindevelopingcitieslikeBangkok…     

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.     

Clay, Phosphate Adsorption, Dispersion, and Rheology

Soluble phosphate is a common ingredient of fertilizer used in agriculture production all over the world. This chemical mixed with soil is transported into the water and marine environment via rainfall causing a range of environmental problems such as toxic algae bloom. Kaolin clay is a common material found in soil and is used as a model system to understand the effects of phosphate adsorption on the flocculation/dispersion of the clay slurries. In the topics, torrential downpours are common. The large water flow will easily disperse the unflocculated or weakly flocculated sediments over a wide area including river and marine environments. Phosphate adsorption was found to weaken the interparticle forces between clay platelets in the slurries. At high enough concentration, it will completely deflocculate the clay slurries, i.e. the net interparticle force is repulsive. A deflocculated slurry is characterised by a low viscosity and no yield stress. As a result, it is much easier to disperse this slurry over a wide area possible even in a small downpour. This study will present the flow and yield stress behaviour of kaolin clay slurries under the influence of adsorbed phosphate.     

Assessment of Treatment Alternatives for Laboratory COD Wastewater: a Practical Comparison with Emphasis on Cost and Performance

This study focused on investigation of treatment alternativesfor COD wastewater from academic laboratories, using a number oftechnologies including chemical reduction/precipitation, ion exchange and adsorption by chitosan. Results showed that highconcentrations of 375 mg l^-1 chromium, 1,740 mg l^-1mercury and 993 mg l^-1 silver in COD wastewater can be reduced to 2.34 mg l^-1, 3.65 mg l^-1 and 1.89 mg l^-1 respectively, by the chemical reduction/precipitationprocess. Results from ion exchange at a flowrate of 20 ml min^-1 showed breakthrough effluent concentrations obtainedat 0.59 mg l^-1 chromium, 3.92 g l^-1 mercury and 0.65 mg l^-1 silver corresponding to 75.6 l at 63 hr, 40.8 l at 34 hr and 33.6 l at 28 hr respectively. Kinetic and isotherm studies revealed that chitosan can adsorb Cr⁶⁺, Hg²⁺ and Ag⁺ ions most effectively at a flowrate of 20 ml min^-1 and the optimum pH for feed solution is 4. Chitosan column experiments indicated that average effluent concentrations at breakthrough point for chromium, mercury andsilver are 0.76 mg l^-1, 6.04 mg l^-1 and 0.51 mg l^-1 respectively with throughput volumes and retention times of 120 l at 100 hr, 60 l at 50 hr and 48 l at 40 hr. Results of solidification experiments for chemical sludge and residual chitosan based on compressive strength and metal leachabilitytests showed, that the acceptable ranges of the solidificationparameters were: sludge/cement = 0.1–1.0 (weight/weight), water/cement = 0.5–0.6 (weight/weight) and sand/cement = 0.5–3.0 (weight/weight). Operating cost per litre of COD wastewater treated, based on the current prices in Thailand wasfound to be Baht 19.95 for the chemical reduction/precipitationprocess, Baht 96.35 for ion exchange treatment and Baht 18.29 forchitosan adsorption.     

Environmental Monitoring and Impact Assessment of a Solid Waste Disposal Site

The objective of this study is an attempt to conduct an environmentalmonitoring and impact assessment of the On-Nooch solid waste disposal sitein Bangkok, Thailand. Four water and five air sampling stations (2 upwindand 3 downwind directions) were established at the site. Grab water samplesfrom leachate treatment plant and Khlong Song Hong, a nearby stream, werecollected during the rainy and dry seasons. Analytical results of the wastewater discharged by the leachate treatment plant, during dry season showedchemical oxygen demand: 618 mg/l; biochemical oxygen demand: 80 mg/l;suspended solid: 101 mg/l; Total Kjeldahl Nitrogen: 283 mg/l, which werestill higher than standard limit for effluents in Thailand. During the dryseason, results also showed widespread heavy metal pollution from leachate(chromium: 1.03 mg/l; manganese: 1.07 mg/l; mercury: 0.025 mg/l) and werehigher than the allowable level of heavy metals for the Industrial EffluentStandard in Thailand. The direct discharge of untreated leachate into inlandwater will cause considerable water pollution in the study area. Compositeair samples in this study area were collected during the rainy and dryseasons and were analyzed for methane (CH₄), carbon dioxide(CO₂), carbon monoxide (CO), sulphur dioxide(SO₂), nitrogen dioxide (NO₂) andsuspended particulate matter (SPM). The average concentration of SPM rangedbetween 0.1–0.36 mg/m³ for 24-hour average, dependingupon the season. The level of CH₄ and CO₂ inthe ambient air of the study area were found to be 3.48–65.71mg/m³ and 886-1758 mg/m³ respectively which weremuch higher than the normal concentration of CH₄ andCO₂ in the air (CH₄: 2.41 mg/m³;CO₂: 585 mg/m³). Hence, adverse health andenvironmental effects could be expected from water and air pollution.     

Application of proteomics in environmental science

Proteomics involves the separation of proteins, identification of the amino acid sequence of the interested or target proteins, study of the function of the proteins, modification, structure and ultimate assignments to functional pathways in the cell. The proteomic investigations have contributed greatly to human diseases studies, new drugs discovery researches, and environmental science in recent years. This article provides a review on the development of the main proteomic technologies, including both the gel based and non-gel based technologies, and their applications in environmental science. Proteomic technologies have been utilized in the environmental stresses studies to analyze the induction or reduction of proteins at expression level and identify the target proteins to investigate their function in response to environmental stresses, such as high or low pH, oxidation stress, and toxic chemicals. Such protein responses are also helpful to understand the mechanisms of some cellular activities and the functions of some proteins.     

Accelerated sunlight photocatalysis through improved electron mobility between g-C3N4 and BiPO4 nanomaterial

Herein, we report a detailed study on creating heterojunction between graphitic carbon nitride (g-C₃N₄) and bismuth phosphate (BiPO₄), enhancing the unpaired free electron mobility. This leads to an accelerated photocatalysis of 2,4-dichlorophenols (2,4-DCPs) under sunlight irradiation. The heterojunction formation was efficaciously conducted via a modest thermal deposition technique. The function of g-C₃N₄ plays a significant role in generating free electrons under sunlight irradiation. Together, the generated electrons at the g-C₃N₄ conduction band (CB) are transferred and trapped by the BiPO₄ to form active superoxide anion radicals (?O₂^?). These active radicals will be accountable for the photodegradation of 2,4-DCPs. The synthesized composite characteristics were methodically examined through several chemical and physical studies. Due to the inimitable features of both g-C₃N₄ and BiPO₄, its heterojunction formation, 2.5wt% BiPO₄/g-C₃N₄ achieved complete 2,4-DCP removal (100%) in 90 min under sunlight irradiation. This is due to the presence of g-C₃N₄ that enhanced electron mobility through the formation of heterojunctions that lengthens the electron-hole pairs’ lifetime and maximizes the entire solar spectrum absorption to generate active electrons at the g-C₃N₄ conduction band. Thus, this formation significantly draws the attention for future environmental remediation, especially in enhancing the entire solar spectrum’s harvesting.

Graphical abstract

     

4R of rubber waste management: current and outlook

Journal of Material Cycles and Waste Management - Excessive accumulation of rubber waste necessitates the need to revisit the effectiveness of the existing rubber waste management system. This...