Groundwater arsenic contamination in Brahmaputra river basin: a water quality assessment in Golaghat (Assam), India

Distribution of arsenic (As) and its compound and related toxicology are serious concerns nowadays. Millions of individuals worldwide are suffering from arsenic toxic effect due to drinking of As-contaminated groundwater. The Bengal delta plain, which is formed by the Ganga?CPadma?CMeghna?CBrahmaputra river basin, covering several districts of West Bengal, India, and Bangladesh is considered as the worst As-affected alluvial basin. The present study was carried out to examine As contamination in the state of Assam, an adjoining region of the West Bengal and Bangladesh borders. Two hundred twenty-two groundwater samples were collected from shallow and deep tubewells of six blocks of Golaghat district (Assam). Along with total As, examination of concentration levels of other key parameters, viz., Fe, Mn, Ca, Na, K, and Mg with pH, total hardness, and SO $_{4}^{2-}$ , was also carried out. In respect to the permissible limit formulated by the World Health Organization (WHO; As 0.01 ppm, Fe 1.0 ppm, and Mn 0.3 ppm for potable water), the present study showed that out of the 222 groundwater samples, 67%, 76.4%, and 28.5% were found contaminated with higher metal contents (for total As, Fe, and Mn, respectively). The most badly affected area was the Gamariguri block, where 100% of the samples had As and Fe concentrations above the WHO drinking water guideline values. In this block, the highest As and Fe concentrations were recorded 0.128 and 5.9 ppm, respectively. Tubewell water of depth 180 ± 10 ft found to be more contaminated by As and Fe with 78% and 83% of the samples were tainted with higher concentration of such toxic metals, respectively. A strong significant correlation was observed between As and Fe (0.697 at p < 0.01), suggesting a possible reductive dissolution of As?CFe-bearing minerals for the mobilization of As in the groundwater of the region.     

Effect of biochar on fate and transport of manure-borne estrogens in sandy soil

The feasibility of using two types of biochars to reduce steroid hormone pollution from poultry and swine manure application on agricultural land was evaluated.The sorption affinity and desorption resistance of softwood and hardwood biochars were also determined for two estrogen hormones,17β-estradiol(E2) and its primary metabolite estrone(E1).The softwood and hardwood biochars demonstrated high retention capacity for both estrogens.The effective distribution coefficient(K_d~(eff)) of soil-softwood-derived biochar(SBS_(450)) was significantly higher than soil-hardwood-derived biochar(SBH750),indicating the stronger sorption affinity of SBS450 for estrogens.To validate the laboratory results,a field lysimeter experiment was conducted to study the fate and transport of E2 and E1 in soil and leachate in the presence of 1% softwood-biochar(BS450) in topsoil and to compare it with soil without any amendments.The spatio-temporal distribution of both estrogens was monitored at four depths over a 46-day period.The lysimeters,in which the surface layer of soil was amended with biochar,retained significantly higher concentrations of both estrogen hormones.Although they leached through the soil and were detected in leachates,collected at 1.0 m depth,the concentrations were significantly lower in the leachate collected from biochar-amended lysimeters.The result confirmed the efficacy of biochar amendment as a remediation technique to alleviate the manure-borne hormonal pollution of groundwater.     

An analytical force model for orthogonal elliptical vibration cutting technique

The elliptical vibration cutting (EVC) technique has been found to be a promising technique for ultraprecision machining of various materials. In each overlapping EVC cycle, the thickness of cut (TOC) of work material, and the tool velocity get continuously varied. These two inherent phenomena, in fact, introduce transient characteristics into its cutting mechanics, which are considered to be different from the one applied for conventional cutting technique. Recently, a few theoretical models have been developed to understand the material removal mechanism with the EVC technique; however, in those studies, the transient phenomena were not considered. In the present research, an analytical force model for the orthogonal EVC process was developed in order to fully understand the EVC mechanism, and to more accurately predict the transient cutting force values. Three important factors: (i) transient TOC, (ii) transient shear angle, and (iii) transition characteristic of friction reversal were investigated and analyzed mainly based on geometric modeling and the Lee and Shaffer's slip-line solution. Mathematical evaluation shows that they may have significant influence on EVC process, and thus on its output performance. In order to validate the proposed force model, a series of low-frequency orthogonal EVC tests were conducted. The experimental transient cutting force values were compared with the predicted values calculated using the proposed model, and they are found to be in a good agreement with each other.     

Mycoremediation of heavy metals: processes,mechanisms, and affecting factors

Environmental Science and Pollution Research - Industrial processes and mining of coal and metal ores are generating a number of threats by polluting natural water bodies. Contamination of heavy...     

Effect of Zn salts and hydrolyzing agents on the morphology and antibacterial activity of zinc oxide nanoparticles

Environmental Chemistry Letters - Zinc oxide nanoparticles (ZnONPs) are considered safe as antibacterials. Those nanoparticles should preferably have uniform size and shape, but conditions to...     

Surface signatures of submerged heated jet

The flow induced at the surface of a water body by a submerged heated horizontal turbulent jet was investigated experimentally with the aim of developing parameterizations for surface mean temperature/velocity fields. The jet nozzle diameter was fixed, the depth of the jet beneath the free surface was varied, and two jet Reynolds numbers (5020, 11300) were considered. The surface temperature was measured using a highly sensitive infrared camera, and the near-surface horizontal velocity field was measured using particle image velocimetry. The experimental results were explained using a model based on similarity solutions with variable turbulent viscosity. While classical Schlichting’s solution with constant turbulent viscosity predicts complete similarity for transverse velocity/temperature distributions only in a plane that coincides with the flow axis, the present solution predicts similarity in an arbitrary plane parallel to the flow axis, which was confirmed using data collected at the surface. Comparisons of present data with available previous results also showed general agreement.     

Development of a unique topology for a hard-turning micro-scale machine tool

A micro-scale machine tool (mMT) topology is developed for turning hardened steel bearing components. The topology utilizes the principle of leverage to increase accuracy and stiffness and incorporates decoupling to reduce unwanted motion of the tool. Performance specifications required that the static stiffness is at least 10 N/μm and dynamic stiffness is at least 30 N/μm in all directions. The kinematics for the topology are developed to enable control over the position and orientation of the tool tip. The effect of the topology on rake angle is determined and the topology is adjusted so as to minimize the rake angle variation during the cut. Cutting tests are performed to determine cutting parameters for achieving a low surface roughness and to estimate the accuracy of the machine. Tests show that the hard-turning mMT can achieve surface roughness below 25 nm Ra, diametrical accuracy of 1 μm and peak-to-valley roundness deviation (RONt) below 0.35 μm.     

Seasonal perspective of dietary arsenic consumption and urine arsenic in an endemic population

Exposure to arsenic in arsenic endemic areas is most remarkable environmental health challenges. Although effects of arsenic contamination are well established, reports are unavailable on probable seasonal variation due to changes of food habit depending on winter and summer seasons, especially for endemic regions of Nadia district, West Bengal. Complete 24-h diets, drinking–cooking water, first morning voided urine samples, and diet history were analyzed on 25 volunteers in arsenic endemic Chakdah block of Nadia district, once in summer followed by once in winter from the same participants. Results depicted no seasonal variation of body weight and body mass index. Arsenic concentration of source drinking and cooking water decreased (p?=?0.04) from 26 μg L^?1 in summer to 6 μg L^?1 in winter season. We recorded a seasonal decrease of water intake in male (3.8 and 2.5 L day ^?1) and female (2.6 and 1.2 L day^?1) participants from summer to winter. Arsenic intake through drinking water decreased (p?=?0.04) in winter (29 μg day^?1) than in summer (100 μg day^?1), and urinary arsenic concentration decreased (p?=?0.018) in winter (41 μg L^?1) than in summer (69 μg L^?1). Dietary arsenic intake remained unchanged (p?=?0.24) over the seasons. Hence, we can infer that human health risk assessment from arsenic needs an insight over temporal scale.     

Microbial regeneration of spent activated carbon dispersed with organic contaminants: mechanism, efficiency, and kinetic models

Background and purpose

Regeneration of spent activated carbon assumes paramount importance in view of its economic reuse during adsorptive removal of organic contaminants. Classical thermal, chemical, or electrochemical regeneration methods are constrained with several limitations. Microbial regeneration of spent activated carbon provides a synergic combination of adsorption and biodegradation.

Methods

Microorganisms regenerate the surface of activated carbon using sorbed organic substrate as a source of food and energy. Aromatic hydrocarbons, particularly phenols, including their chlorinated derivatives and industrial waste water containing synthetic organic compounds and explosives-contaminated ground water are the major removal targets in adsorption?Cbioregeneration process. Popular mechanisms of bioregeneration include exoenzymatic hypothesis and biodegradation following desorption. Efficiency of bioregeneration can be quantified using direct determination of the substrate content on the adsorbent, the indirect measurement of substrate consumption by measuring the carbon dioxide production and the measurement of oxygen uptake. Modeling of bioregeneration involves the kinetics of adsorption/desorption and microbial growth followed by solute degradation. Some modeling aspects based on various simplifying assumptions for mass transport resistance, microbial kinetics and biofilm thickness, are briefly exposed.

Results

Kinetic parameters from various representative bioregeneration models and their solution procedure are briefly summarized. The models would be useful in predicting the mass transfer driving forces, microbial growth, substrate degradation as well as the extent of bioregeneration.

Conclusions

Intraparticle mass transfer resistance, incomplete regeneration, and microbial fouling are some of the problems needed to be addressed adequately. A detailed techno-economic evaluation is also required to assess the commercial aspects of bioregeneration.     

Variations in single scattering albedo and Angstrom absorption exponent during different seasons at Delhi,India

Simultaneous measurements of aerosol absorption and scattering coefficients for the PM_2.5 aerosols particles were done at Delhi during April 2008–March 2009 to estimate the aerosol single scattering albedo (SSA) and the Angstrom absorption exponents at the surface. The annual average SSA at 0.55 μm was found to be 0.70 ± 0.07 with only slight variations during the four seasons, summer (0.63 ± 0.06), monsoon (0.69 ± 0.07), winter (0.74 ± 0.03) and spring (0.72 ± 0.04). However, large variations in average absorption and scattering coefficients were seen during these four seasons. The average absorption coefficients during summer, monsoon, winter and spring were found to be 62.47 ± 21.27, 50.95 ± 43.61, 189.65 ± 85.94 and 90.65 ± 33.06 Mm^?1 respectively. The corresponding scattering coefficients were 110.46 ± 36.15, 95.34 ± 49.46, 565.59 ± 274.59 and 236.56 ± 96.25 Mm^?1. The Angstrom absorption exponent (α_σ(abs)) remained close to unity throughout the year averaging at 1.02 ± 0.08, 1.02 ± 0.10, 1.04 ± 0.11, and 1.03 ± 0.05 during summer, monsoon, winter and spring seasons respectively, strongly indicating that the absorption at Delhi aerosol is mainly due to the abundance of black carbon of fossil fuel origin.