Identification of heavy metal pollutants using multivariate analysis and effects of land uses on their accumulation in urban soils in Beijing, China

In order to evaluate the current state of the environmental quality of soils in Beijing, we investigated contents of 14 metals in Beijing urban soils inside the 5th ring road by even grids sampling. Statistic analyses were conducted to identify possible heavy metal pollutants, as well as the effects of land uses on their accumulation. Our results revealed that the urban soils in Beijing were contaminated by Cd, Pb, Cu, and Zn. Land uses and urbanization ages affected the accumulation of the four heavy metals in soils significantly. Soils in industrial areas have the highest average Cu and Zn contents, while Pb contents in park areas and Cd in agricultural areas are the highest. The accumulations of Pb and Zn in urban soils increase significantly with sampling plots approaching the city center. And Pb, Cd, and Zn contents in soils in traffic areas also tend to increase in the city center. However, residential areas have the lowest contents of all the four heavy metals.     

松嫩平原土地荒漠化动态监测与分析

土地荒漠化是土地退化的一种主要形式,也是生态环境恶化的一种主要表现,严重制约着农业生产的发展.以1975年MSS卫星遥感影像、1990年TM卫星遥感影像以及2001年ETM卫星遥感影像等数据为信息源,采用地理信息系统的分析方法,引入荒漠化动态度等表征参量,建立了科学的荒漠化土地类型和土地动态转化分级系统,对我国松嫩平原近30年来的荒漠化土地进行了动态变化分析.结果表明,在1975～1990年期间,松嫩平原荒漠化土地呈明显发展趋势,其面积增加了1368931hm2,荒漠化边缘地区恶化现象明显强于腹地;在1990～2001年期闻,松嫩平原荒漠化土地总面积缓慢减少.减少面积为297867hm2,荒漠化呈逆转趋势,逆转现象边缘地区强于腹地,土地荒漠化趋势基本得到遏制.     

浙江省危险废物和污泥处置现状及加强全过程监管工作的探讨

随着近几年经济发展水平的提高,浙江省的危险废物和污泥产生量呈不断增长趋势,它们的产生、贮存、转运和处置过程中的监管压力也逐年增大。总结了浙江省的危险废物产生现状,分析了存在的主要问题,对比了发达国家的相关管理经验,提出了进一步完善浙江省危险废物和污泥全过程监管工作的建议。     

Influence of eutrophication on the coagulation efficiency in reservoir water

Water from the three reservoirs, Min-ter, Li-yu-ten and Yun-ho-shen, was examined for concentration of chlorophyll a, ultraviolet absorption (UV(254)), fluorescence intensity (FI), concentration of dissolved organic carbon (DOC), and fractionation of dissolved molecules by molecular weight. The water samples were collected over the change from spring to summer (May to July but before the typhoon season) when the water temperature and extent of eutrophication increase. Analytical results indicate that the concentration of DOC is proportional to the concentration of chlorophyll a, but not to the values of UV(254) and FI. Therefore, eutrophication, extraneous contaminants of small molecules, and the extracellular products of algae cause an increase in DOC, but a decrease in the proportion of large organic molecules such as of humic substances. The fraction of DOC with a molecular weight of less than 5000 Da increases with the concentration of chlorophyll a. All these data suggest that changes in the quality of water after eutrophication make the treatment of drinking water more difficult. The method of enhanced coagulation was recently developed for removing DOC. However, the results of this paper demonstrate that the efficiency of DOC removal falls as the degree of eutrophication increases. When the percentage of DOC with small molecules excreted by algae increased by 1%, the efficiency of DOC removal decreased by approximately 1%, implying that enhanced coagulation are not able to remove the DOC excreted by the algae during eutrophication, and resulting an increased concentration of trihalomethanes formation in water disinfections process.     

Changes in the grassland-forest boundary at Ta-Ta-Chia long term ecological research (LTER) site detected by stable isotope ratios of soil organic matter

The carbon isotope analysis [delta13C values] of organic samples can be a useful research in ecological studies because delta13C values are indicative of the plant source. This study investigated the changes in plant communities along the grassland-forest boundary in the alpine forest at Ta-Ta-Chia long term ecological research (LTER) site in central Taiwan using carbon isotope data. The aim of this study was focused on the forest fire affected the change of vegetation community. Four pedons from grassland dominated by Miscanthus transmorrisonensis (pedons 1 and 2), transition zone by Tsuga and Yushania nittakeyamensis (pedon 3), and forest zone by Tsuga and nittakeyamensis (pedon 4) were examined. Soil organic matter (SOM) delta13C values in the upper soil horizon were similar to delta13C values of the overlaying vegetation types. This indicates that the boundary between these plant communities remained the same in the past decades. The delta13C values of the grassland SOM ranged from -19.4 per thousand to -24.1 per thousand, showing decrease with soil depth. This suggests that C4 plants (transmorrisonensis) have replaced C3 plants of Tsuga and nittakeyamensis. The delta13C values of the Tsuga forest area (pedon 4) range from -27.0 per thousand to -23.5 per thousand and showed only slight change with soil depth, implying that C3 plants have remained the major species in the forest.     

医疗废物中有机质的热解动力学研究

在空气气氛下,对医疗废物中几种有代表性的有机质进行非等温热解实验。分析实验结果发现,热解失重曲线与N2气氛下不同,出现多个DTG峰。利用Freeman Carroll法求出了各有机质的表观动力学参数,并建立了能较好反映各物料失重过程的表观多步反应动力学模型。针对混合物料无法直接求出表观动力学参数,建立了多组分反应动力学模型。     

Comparisons of the dust/smoke particulate that settled inside the surrounding buildings and outside on the streets of southern New York City after the collapse of the World Trade Center, September 11, 2001

The collapse of the World Trade Center (WTC) on September 11, 2001, generated large amounts of dust and smoke that settled in the surrounding indoor and outdoor environments in southern Manhattan. Sixteen dust samples were collected from undisturbed locations inside two uncleaned buildings that were adjacent to Ground Zero. These samples were analyzed for morphology, metals, and organic compounds, and the results were compared with the previously reported outdoor WTC dust/smoke results. We also analyzed seven additional dust samples provided by residents in the local neighborhoods. The morphologic analyses showed that the indoor WTC dust/smoke samples were similar to the outdoor WTC dust/smoke samples in composition and characteristics but with more than 50% mass in the <53-microm size fraction. This was in contrast to the outdoor samples that contained >50% of mass above >53 microm. Elemental analyses also showed the similarities, but at lower concentrations. Organic compounds present in the outdoor samples were also detected in the indoor samples. Conversely, the resident-provided convenience dust samples were different from either the WTC indoor or outdoor samples in composition and pH, indicating that they were not WTC-affected locations. In summary, the indoor dust/smoke was similar in concentration to the outdoor dust/smoke but had a greater percentage of mass <53 microm in diameter.     

医疗废物中有机质的热解动力学研究

在空气气氛下，对医疗废物中几种有代表性的有机质进行非等温热解实验。分析实验结果发现，热解失重曲线与N2气氛下不同，出现多个DTG峰。利用Freeman—CarroⅡ法求出了各有机质的表观动力学参数，并建立了能较好反映各物料失重过程的表观多步反应动力学模型。针对混合物料无法直接求出表观动力学参数，建立了多组分反应动力学模型。     

Profiles of PAH emission from steel and iron industries

In order to characterize the polycyclic aromatic hydrocarbons (PAHs) emission from steel and iron industries, this study measured the stack emission of twelve steel and iron plants in southern Taiwan to construct a set of source fingerprints. The study sampled the emissions by the USEPA's sampling method 5 with the modification of Graseby for the gas and particulate phase PAH and, then, used Hewlett-Packard 5890 gas chromatograph equipped with mass spectrometer detector to analyze the samples. The steel and iron industries are classified into three categories on the basis of auxiliary energy source: Category I uses coal as fuel, Category II uses heavy oil as fuel and Category III uses electric arc furnace. The pollution source profiles are obtained by averaging the ratios of individual PAH concentrations to the total concentration of 21 PAHs and total particulate matter measured in this study. Results of the study show that low molecular weight PAHs are predominant in gas plus particulate phase for all three categories. For particulate phase PAHs, however, the contribution of large molecular weight compounds increases. Two-ring PAHs account for the majority of the mass, varying from 84% to 92% with an average of 89%. The mass fractions of 3-, 4-, 5-, 6-ring PAHs in Category I are found to be more than those of the other two categories. The mass of Category III is dominated by 7-ring PAHs. Large (or heavy) molecular weight PAHs (HMW PAHs) are carcinogenic. Over all categories, these compounds are less than 1% of the total-PAH mass on the average. The indicatory PAHs are benz[a]anthracene, benzo[k]fluoranthene, benzo[ghi]perylene for Category I, benzo[a]pyrene, acenaphthene, acenaphthylene for Category II and coronene, pyrene, benzo[b]chrycene for Category III. The indicatory PAHs among categories are very different. Thus, dividing steel and iron industry into categories by auxiliary fuel is to increase the precision of estimation by a receptor model. Average total-PAH emission factors for coal, heavy oil and electric arc furnace were 4050 μg/kg-coal, 5750 μg/l-oil, 2620 μg/kW h, respectively. Carcinogenic benzo[a]pyrene for gas plus particulate phase was 2.0 g/kg-coal, 2.4 μg/l-oil and 1.4 μg/kW h for Category I, II and III, respectively.